2007-09-A&CC
The following products were approved or certified during June, 2007, and have been added to the Mine Safety and Health Administration's list of permissible equipment.
1. "ATOFC" Brattice Cloth. Approval No. 07-BA070008-0, issued to Seaman Corporation, 1000 Venture Blvd., Wooster, Ohio 44691, June 20, 2007.
2. "RTOFC" Brattice Cloth. Approval No. 07-BA070009-0, issued to Seaman Corporation, 1000 Venture Blvd., Wooster, Ohio 44691, June 20, 2007.
3. Type 48 Cell, 12 and 24 Volt, 440 A.H. Battery Assembly. Approval No. 07-CA070008-0, issued to Reaco Battery Service Corporation, Service Center One, 17217 Route 37, Johnston City, Illinois 62951, June 27, 2007.
4. Model 64_21/25WM-1, 128 Volt, 450/540/550/660/650/780/, 750/850, 900/1020, 1000/1200/1250/1500 A.H. Battery Assembly. Approval No. 07-CA070009-0, issued to Bulldog Battery Corporation, P.O. Box 766, Wabash, Indiana 46992, June 26, 2007.
5. Model DM950DTH Diesel Engine. Approval No. 07-ENA070004-0, issued to Daihatsu Motor Co., LTD, c/o Briggs & Stratton Daihatsu LLC, P.O. Box 702, Milwaukee, Wisconsin 53201, June 13, 2007.
The following products were approved or certified as having met Part 18, Title 30 CFR.
1. Paladin Data Acquisition System. Approval No. 18-A070009-0, issued to E.S.G. Canada Inc., 1 Hyperion Court, Kingston, Ontario, K7K 7G3 Canada, June 26, 2007.
2. Series 2600, 460/575 Volt Alternating Current, 60 Hertz, 3 Phase Pump. Approval No. 18-A070011-0, issued to ITT Flygt Corporation, 35 Nutmeg Drive, P.O. Box 1004, Trumbull, Connecticut 06611, June 8, 2007.
3. 24 Volt DC Permissible Battery-Operated Blower Motor Assembly. Approval No. 18-A070012-0, issued to Modern Mine Safety Supply, LLC, P.O. Box 480, Huntington, Utah 84528, June 27, 2007.
4. 5292007 Transducer. Approval No. 18-NXA070002-0, issued to The Paquin Company, 26981 Lakeland Boulevard, Cleveland, Ohio 44132, June 26, 2007.
The following products were accepted as having met the flame requirements of Part 18, Title 30 CFR, and the "Flame Resistant Solid Products Taken Into Mines" criteria.
1. SMM Safety Directional Line lifeline with rope manufactured by Callaway Sales. Approval No. 18-LLA070003-0, issued to Boone Supply Company, P.O. Box 429, 100 Coal River Drive, Sylvester, West Virginia 25193, June 25, 2007.
2. "Nylatron@ GS Nylon" material used for cable reel flanges or guides. Acceptance No. CR-13/0, issued to Quadrant EPP USA, 2120 Fairmont Avenue, Reading, Pennsylvania 19605, June 4, 2007.
The following products were accepted as having met the "Flame Resistant Solid Products Taken Into Mines" criteria.
1. Type 4701 Skirtboard/Belt Wiper. Acceptance No. IC-118/4, issued to Rex-Hide Industries, Inc., 705 South Lyons Ave., Tyler, Texas 75702, June 18, 2007.
2. Type 5700 Rubber Pulley Lagging. Acceptance No. IC-216/1, issued to Conveyor Components Inc., 306 Bethany Road, P.O. Box 1267, Albemarle, North Carolina 28001, June 28, 2007.
3. 3V-018-36-105 V-Groove Runner Matting. Acceptance No. IC-246/0, issued to DiMEX LLC, 28305 State Route 7, Marietta, Ohio 45750, June 20, 2007.
Sincerely,
John P. Faini
Chief, Approval and Certification Center