Skip to content
Mine Safety and Health Administration MSHA's Accident Prevention Program
Miner's Tip

Don't Enter The Turning Radius
Until the Remote Control
Continuous Miner Stops Moving

Safety Something YOU can live with!
Mine Type: Underground Coal and Non-Metal
Category: Section Face Equipment

Remote Control Continuous Miner

To avoid crushing injuries, do not enter the Turning Radius surrounding a remote control continuous mining machine until the pump motor has been turned off and the machine has COMPLETELY STOPPED.

If a remote control continuous mining machine is tramming, turning, or rotating, it may continue to move for a few seconds after the pump motor is turned off or the machine off switch is activated. During this time, the machine may travel a few extra feet especially when operating on uneven bottom.

If you have a tip you would like to pass on, you can e-mail it to
If your tip is selected, you will receive credit in this space.

Issued: 07/01/2009
Tag # AP2009-06-25