Skip to content
Mine Safety and Health Administration MSHA's Accident Prevention Program
Miner's Tip

Stop, Scan & Plan

Safety Something YOU can live with!
Mine Type: All Mines
Category: General Safety

After a designated employee performs an examination, you should additionally "Take 30". Take 30 seconds to "Stop, Scan & Plan" whenever walking into a new location to do a job.

A mine and/or mill is an ever-changing environment. Let's say that you have been performing maintenance on a stationary machine. After shutting down welding/cutting torches, putting your tools back into the bucket, unplugging a drill motor and so forth, you come to the end of your shift. The next day when you return, your work location could have changed. Take a few moments to look around and examine the area for any hazards that you either missed earlier or have been created since you were there last.

If you jump right back into the task you were performing, you may find out that the environment has changed and new, unexpected hazards have developed.

When entering a work area, it may only take you 30 seconds to:

Issued: 11/22/2002
Tag # AP2002-M088

MSHA extends a thank you and a tip of the hardhat to
Mr. Terry Tyson
a winner of a limited edition sticker and patch.

If you have a tip you would like to pass on, you can e-mail it to If your tip is selected, you will receive credit in this space.