Skip to content
[December 11, 2006 (Volume 71, Number 237)]
[Unified Agenda]
[Page 73559-73560]

Department of Labor (DOL)
Mine Safety and Health Administration (MSHA)
Final Rule Stage



Priority: Other Significant

Legal Authority: 30 USC 811; 30 USC 957; 30 USC 961

CFR Citation: 30 CFR 18; 30 CFR 75

Legal Deadline: None

Abstract: Our July 16, 2004, NPRM (69 FR 42812) proposed to establish design requirements for approval of high-voltage continuous mining machines operating where miners work in underground coal mines. The rule also proposed to establish new mandatory electrical safety standards for the installation, use, and maintenance of the high- voltage continuous mining machines. MSHA published a supplemental NPRM on March 28, 2006 (71 FR 15359). This supplemental NPRM proposed and requested the comments on two issues that arose from oral and written comments that MSHA received during the hearing and post-hearing comment period on the NPRM. These issues involved: (1) Types of trailing cables that can be used with high-voltage continuous mining machines; and (2) a requirement to use high-voltage insulating gloves or other personal protective equipment when handling energized high-voltage trailing cables.


Action                            Date                      FR Cite


NPRM                            07/16/04                    69 FR 42812
NPRM Comment Period End         08/23/04                    69 FR 51784
Second NPRM                     03/28/06                    71 FR 15359
Second NPRM Comment Period End  05/30/06
Final Action                    06/00/07

Regulatory Flexibility Analysis Required: No

Government Levels Affected: None

Agency Contact: Patricia W. Silvey, Director, Office of Standards,
Regulations, and Variances, Department of Labor, Mine Safety and Health Administration,
1100 Wilson Boulevard, Room 2350, Arlington, VA 22209-3939

Phone: 202 693-9440

Fax: 202 693-9441


RIN: 1219-AB34