220260200013C13097Employee was cleaning snow off conveyor belt walkway, after task was completed, employee removed EE's lock from Substation and proceeded to walk away from substation and slipped on an icy area twisted/fractured  EE's ankle, weather conditions snowed the previous day, so the 9th was a mixture of snow and mud.
220260200026C13558Icy conditions on deck of crane. Operator was leaving cab and slipped on deck of crane and fell to same level. The operator grabbed the cab door on way down causing minor strain to right shoulder. The operator's hard hat came off, EE's butt hit 1st causing bruising to right humerus, and back of head struck platform resulting in a contusion and hematoma.
220260230007C13818Employee was working in soft ground conditions when EE's right foot became stuck. EE lost balance, fell, and fractured EE's ankle. This incident did not involve any aspect of compliance with rules and regulations; mine equipment or mining system; job skills and miner proficiency, training and attitude; or protective items relating to clothing, or protective devices on equipment.
220260300010C11914The employee was dismounting the drill from the offside ladder. When on the last rung of the ladder, EE's foot slipped off and when EE landed on the uneven ground EE felt a pop in EE's ankle.
220260350003C13808Contract employee was leaving the house of the dragline via the staircase.  Once EE reached the bottom step, EE lost EE's balance and began to fall to the dragline shoe below (25 inches).  EE's momentum carried EE forward, where EE fell off the dragline shoe to the ground below (51 inches). The impact to the ground resulted in 2 fractured vertebrae and lacerations to EE's face.
220260350010C12035Employee was on crew changing rollers, and EE's hand was pinned between a roller and a locked out belt while replacing a roller in a cradle. Accident was not the result of a training or compliance issue.
220260350021C12035Employee was changing a ram jack on longwall.  While employee was trying to get the ram jack into position, it slipped and accidentally got finger caught between  the jack and the panline causing injury.
220260350037C12596Employee was carrying a box of detonators while distributing them on blast pattern when they stepped into a low spot in the ground, employee felt discomfort in their abdomen. Employee was diagnosed with a hernia on 1-29-2026 making this a reportable incident.
220260350039C10752Employee was pulling a CBS blade with their right arm when they felt a pull
220260350050C13748Employee was operating an excavator on a hillside. The employee stepped out of the equipment and when they stepped onto the ground they slipped on ice and fell on left shoulder. Incident occurred on 01-06-2026, however, initial doctors assessment did not show any injuries or restrictions. Follow up assessment was conducted today 02-03-2026 and a scan showed a torn muscle.
220260370013C10882Drill steel fell out of the top striking and cutting the employee's right middle finger.
220260370015C11624IE was carrying v-deck into and down the beltline. They stepped on uneven bottom and rolled an ankle. Injury was not the result of a training or compliance issue.
220260370016C13849Removing broken master link bolts - D10T track.  Elevated portion on the service truck crane and a crib block. When lowering track to ground, engaged boom in order to elevate the track off the crib block. Boom had a delayed due to a now diagnosed missing sensor spring. The boom raised unexpectedly, caused tension on the crane cable and the cable whiplashed. Laceration to forehead. 
220260440007C12876Employee was repositioning a hydraulic jack under the right front of a 777-haul truck. While positioning the jack to the correct spot employees left thumb got caught between the jack handle and the tow hitch of the haul truck. Resulting in  a fracture and laceration of the left thumb.  
220260480018C11634Employee was in the process of putting the bedrail into the structure and accidentally got EE's finger caught on a burr in the structure causing injury (stitches).
220260540019C12416IE was shoveling the tunnel belt. As EE was shoveling under the stairs, EE bumped EE's head into the stairs. EE continued shoveling until EE bumped EE's head into the stairs again. Injury was not the result of a training or compliance issue.
220260540021C13017IE was assisting placing new floor section into a vessel. The crew was in the process of lowering it in with an air hoist. The floor plate shifted and the employee's ankle/foot was wedged between the floor section and the feed impact plate. Injury was not the result of a training or compliance issue.
220260540029C11674Employee was in the process of changing out a discharge sprocket.  While releasing a come-along, elbow accidentally hit the brace of the sprocket causing a laceration.
220260560002C11674Employee was using a grinder to cut a bolt when the grinder disk came apart and struck EE in the left hand resulting in a laceration. The injury resulted in 5 sutures.
220260570003C13808***summarized from attached letter*** Employee was lifting rebar in conjunction with other employees. In lifting and/or moving the rebar, the employee either injured or re-injured their back. The employee sought medical treatment that day and after treatment was released to work, without restriction, by the doctor effective February 9, 2026. (letter attached to original filing)
220260610028C11614Employee was taking out belt structure. They pulled on a piece of structure that was laying between the top and bottom belt and felt pain in their back (strain).
220260620011C13818Drilling with a jack leg drill. EE removed drill pressure and the drill dropped but the drill steel stuck in the roof. EE grabbing the top of the drill to keep it from falling when the drill steel fell from the hole, striking EE's finger. EE was taken to the ER and diagnosed to have sustained a laceration and fracture to the right index finger. It required stitches and a splint.
220260620023C12917Employee was helping remove a spindle group from a front suspension cylinder of a haul truck. When the spindle came loose it dropped down striking the employee's arm and caught it between the spindle and the steering link of the haul truck resulting in a deep laceration to the left forearm.
220260630011C12426EMPLOYEE WAS STEPPING DOWN A STAIRS NOT FACING THE STAIRS AND WITHOUT THREE POINTS OF CONTACT WHEN EE LOST EE'S FOOTING AND SLID DOWN THE LAST THREE STEPS LANDING AWKWARDLY ON EE'S RIGHT ANKLE CAUSING A FRACTURE TO EE'S TIBIA ABOVE THE ANKLE.
220260650011C12185Employee and coworkers were jacking up the belt to change rollers, when the chain attached from the come along to the belt structure snapped causing the structure to fall and the employee to fall to the ground with it.
220260690014C11965IE felt pop and pain in shoulder/neck area while using a sledge hammer to bust up a rock. Injury was occurred on 1/23/26, but IE worked unrestricted until they sought medical attention on 2/25/26.
220260700020C12576While clearing brush, the employee got a wood shaving beneath their face shield and safety glasses, causing irritation to their left eye. Employee was evaluated by a physician and prescribed medicated eye drops. No lost workdays or restricted duty resulted.
220260720002C12526The Employee was attempting to lift a cribbing block out of the back of a pickup truck while fully extended over the tailgate. In the process of lifting EE felt a pop in EE's right shoulder and noticed a lump. EE later noticed a bruise on EE's shoulder
220260750001C11233Employee was removing PTO pump from truck and dropped pump on right little finger causing laceration requiring 5 stitches. 
220260750024C13849Employee experienced skin irritation following a cumulative exposure to water over their boots while searching for a damaged coupler. This incident did not involve any aspect of compliance with rules and regulations; mine equipment or mining system; job skills and miner proficiency, training and attitude; or protective items relating to clothing, or protective devices on equipment.
220260750025C11714IE experienced skin irritation after exposure to water over the boots while searching for a damaged coupler. Incident was not the result of a training or compliance issue.
220260750026C11714IE experienced skin irritation after exposure to water over the boots while searching for a damaged coupler. Incident was not the result of a training or compliance issue.
220260750027C11714IE experienced skin irritation after exposure to water over the boots while searching for a damaged coupler. Incident was not the result of a training or compliance issue.
220260760004C10772Employee was cutting a belt when EE's hand slipped and EE cut EE's left pinky
220260760009C11764The IE and other were operating the drill rig and pulling drill pipe out of the borehole. The IE was turning the drill steel carousel by hand and felt a pop in EE's left elbow.
220260760014C12937Employee had finished bolting on EE's side and went to assist EE's bolting partner who was struggling with setting EE's drill steels out of the top. EE asked EE's bolting partner to lower the drill pod a little bit but instead EE brought it down all the way on top of the employees right foot.
220260790002C12917EE was cutting a discarded piece of belt with a belt utility knife. EE was cutting away from self and snapped the blade off. A small piece of the broken blade was lodged in the belt and as EE's momentum and EE's right linear distal medium forearm was struck against causing a 2CM laceration.
220260790011C11203Employee was walking to EE's work location and felt something in EE's right eye. Wind and dust could have been a factor.
220260820006C12576Employee was attempting to widen the forks on a telehandler. During the process, one of the forks slipped from EE's hand and pinched EE's left hand between the fork and the mast, resulting in a laceration to EE's thumb and forefinger which required sutures.
220260820007C11353EE was clearing some rocks off bed of EE's trailer that is used to haul block and fell off trailer resulting in injury to EE's shoulder
220260900013C12606While the employee was rigging & lifting a gang box/metal crate, the box/crate began to swing oddly and ended up pinching the employee's right hand & wrist between the wall & the box/crate.  Employee ended up needing seven stitches and was put on restrictions.
220260920011C12345EE went to step out of a loader and the chain broke off of the chain step. EE fell about a foot and a half in which EE's knees got stuck under the loader. Ambulance was called and had taken EE to the emergency room to be checked over.
220260920018C13849An employee experienced a medical emergency underground, and the cause was not immediately known. As a courtesy, MSHA's emergency line was notified. Following a thorough investigation by MSHA, the State of Illinois, mine and contractor management, along with a diagnosis from a licensed healthcare professional it was determined the event was not caused by a hazardous mine condition.
220260920030C12015Employee was installing a wishbone pin in a 777 when they felt a sharp pain in left shoulder. They stated it felt better as the day went on but throughout the night it started hurting and burning more.
220260920037C10993IE was moving a tip jack on the longwall face and felt pain in their lower back and abdominal area.
220260920045C11894IE was travelling on the mainline track on a golf cart and encountered a motor trip travelling toward them. They attempted to get out of the way but was unable, and was struck by the motor.
220260960010C11323Employee was using a slap hammer to remove a staple on LW shield and accidentally hit hand against hammer and shield causing injury.
220260970004C12766Employee had help prying an unbolted and stuck point rail, with a slate bar, and as the slate bar became dislodged out of point rail the employee's left foot stayed planted on ground as EE was falling backwards. Afterwards the employee heard something snap in EE's left ankle.
220261030031C13818Employee injured right shoulder while handling props on 1/20/26. They worked unrestricted until 4/5/26, began missing work 4/6/26. This incident did not involve any aspect of compliance with rules and regulations; mine equipment or mining system; job skills and miner proficiency, training and attitude; or protective items relating to clothing, or protective devices on equipment.
220261040003C11914Employee was on EE's knees cleaning out the pan when a rock came sliding down the gob pile and hit EE's left hand and wrist, causing the rock to pinch EE's left middle finger against the pan.
220261040012C13568After pinning the pivot bores, on a Komatsu 930e haul truck, the cranes were lowering the bed over the hoist cylinders. While lowering the bed the ear of the cylinder contacted the ear of the bed breaking the lifting eye used to retain the cylinder in position. The cylinder then contacted the left arm of technician and crushed it against the rear tire.  
220261100015C13528On 3-25-26 the employee was helping remove a bell housing. The employee was standing on a cheater bar attempting to free when EE slipped. The employee reached up to grab a channel to prevent EE from falling and felt a sharp pain in EE's left shoulder. The employee continued to work when the pain didn't subside, EE sought medical attention on 4-16-26.
220261110009C12295Employee was using the fuel truck to grease the 815F compactor. EE was attempting to reel back up the grease hose when EE took a step backwards and fell. When EE fell EE's tailbone/back landed on the front blade of the compactor.
220261170012C13818Employee was performing maintenance involving removal of a hydraulic cylinder on a bulldozer.   While loosening a fitting using an impact gun, residual hydraulic pressure was released, causing a high-pressure spray of hydraulic fluid to contact the employee's head, arms, chest, and shoulders. Employee experienced tingling and was evaluated in the ER; no serious injury was found.
220261180015C11444The IE was carrying a bottle of compressed gas down the longwall face when EE slipped and fell. The IE has pain in the middle part of EE's back.
220261200008C11143Employee was trying to install a replacement impact panel when it dropped, cut and smashed EE's right ring finger.
220261200022C12616On 4/14/26 Operator was in 980 front end loader 3301 EE hit a hole operator stated that EE started having pain in left shoulder went to Dr and never missed work Operator was steel having pain went back to the Dr on 4/29/2026 and the Dr put EE off until 5/6/2026
220261240022C12115IE was changing a roller on the slope belt. The chain hoist supporting the roller slipped and IE's finger was caught between the roller and the frame. Injury was not the result of a training or compliance issue.
220261240023C13548IE was a passenger in a mantrip that was travelling into a track spur. The mantrip struck a dolly that was unseen by the driver, and IE's back struck EE's seat hard. Employee continued to work without restriction until seeking medical attention on 4/24/2026, and began missing days after that. Injury was not the result of a training or compliance issue.
220261260003C11534IE stated that when disconnecting a hose from an air compressor, the fitting and whip check blew out the end of the hose striking the IE on the lower leg
220261260006C11694IE was running string line for a new refuse drive and when EE turned around, EE tripped on another section of the line that had been run. When IE fell EE hurt EE's foot.
220261310017C11734Employee was spraying with a hose under tail drive on belt. EE stood up and a chain swinging from overhead structure accidentally hit EE in mouth and chipped a couple teeth.
220261320005C11383Employee was exiting a mantrip when EE's right foot was stuck under the seat.  When attempting to pull it free EE injured EE's right knee.
220261330006C11834IE slipped while descending some steps in the prep plant. IE did not maintain three points of contact while on the stairs. Injury was not the result of a training or compliance issue.
220261380009C12666Employee was carrying 20' beams through mud. The employee got EE's foot caught on a cable bolt that was sticking out of the mud, causing EE to fall with the beam in EE's hands. Employee fell to the ground, crushing EE's left hand under the beam and EE's body weight.
220261390011C12716An unplanned fire not extinguished within 30 minutes of discovery occurred on a Caterpillar 325c excavator on the course refuse disposal area of the preparation plant.  The machine was owned and operated by Doss Enterprises, LLC.  No injuries resulted from the incident. 
220261390012C12716Employee was in the process of removing a hydraulic hand pump and jack from the top of the tub base and hung EE's foot on a hose and fell forward and EE's thumb on the left hand was caught between pump and ram which caused a fracture of the first joint of the left thumb.
220261400024C11824While watering belt to reduce friction against skirt rubber during a changeout, employee tripped over the water hose as EE was moving down the cat walk. EE fell and broke EE's wrist.
220261410005C12536A miner was struck in the ribs with a drill steel that was hidden under the muck in a horizontal position.  When the backhoe operator raised EE's outrigger it grabbed the steel causing it to twist up out of the muck striking the miner (right side ribs).
220261410017C13127EE and another employee were pulling the engine and removing nose cone on the radiator. EE was on the bottom under the 992g wheel loader. The other employee was on top of the machine.  EE was taking the radiator nose off, accidentally took bolts out of counter weights and it fell on EE. Resulting in a fatality.
220261480020C13548IE was a part of a crew setting posts at right track, 24 wall in the mains. The crew set 2 posts and was in the process of setting a third when a large rock dislodged from the rib. IE dove out of the way of the incoming rock, EE's hard hat fell off and EE struck EE's head on a scoop parked in the crosscut. Injury was not the result of a training issue.
220261490013C12666On 5/20/26 a contract laborer experienced discomfort in EE's groin while helping pull 4" HDPE pipe into a return entry.  On 5/21/26 EE was helping supply a section scoop and experienced more discomfort. EE was taken to a treatment center and diagnosed with a hernia.
220261530013C13608EE started down the hill toward the new portal and parking lot EE was loaded at this time with water and the truck started sliding EE pulled the retarder and mashed the fuel and tried to regain control EE was heading toward a dry patch on the good side of the road when made it to the dry stuff the truck was sideways it cause the truck to go up on its offside
220261540002C12035Employee was moving an oxygen bottle from working skid to the storage skid when another bottle moved pinching left index finger between the two bottles causing a fracture of tip of the left index finger.
220261540013C11935IE was cutting a gauge rod with a guarded grinder. The grinder kicked back and struck IE above the right knee, causing a laceration. Injury was not the result of a training or compliance issue.
220261550004C13027Employee was taking out a roller on the slope and handing it to another employee.  While swinging it to the other employee, EE accidentally got EE's finger caught between the roller and the frame causing injury.          Employee did not miss work; EE was scheduled off Monday, May 25 for Memorial Day.
220261550005C11353Employee was standing in the shop and went to move when EE felt a pop and experienced pain in EE's lower left leg, ankle and calf area.
220261560013C12205The injured employee was working on a belt splice when EE's right arm contacted the belt shear blade resulting in a laceration.  The belt shear was not in operation at the time of injury.  The injury resulted in sutures.
220261590005C13147A shaft driller apprentice was helping apply gunite to the shaft ribs on 6/3/26 at approx. 11pm.  During the course of this process the miners pants became soaked with the concrete material.  When the miner woke up at 1pm on 6/4/26 EE discovered significant concrete burns on both of EE's legs from the knees down.
220261590021C12105Employees were loading a belt dolly onto a flat car.  The employees pushed on the dolly while attempting to straighten out the dolly on the car and the dolly rolled onto the injured employee's finger (fracture)
220261600014C12596Several contract employees were reclaiming discharge pipe that was hung against mine roof. While separating the pipe sections, the pipe began to fall in a chain reaction. Discharge pipe fell from the mine roof, springing upwards, striking employee in the face
220261610006C12335Employees were attempting to get the air lock door off the hinge to be moved. As they lifted it up, the door moved upward and the injured employee's hand accidentally got caught between the roof and the door causing injury to finger.
220261630003C12706Fractured Cap Rock fell from the open space between Long Wall Shield Canopy Tips and the Coal Face. The rock fell at an angle across the Shearer Ranging Arm and forced the Joy Global LCM assisting with technical service into an encumbered position by pinning their foot.
220261660026C12235IE was helping the crew supply the miner. EE slipped on  a channel plate while standing on the bumper of the miner and cut EE's hand trying to catch EE's balance. Injury was not the result of a training or compliance issue.
220261660037C11704IE was shoveling a walkway. A piece of rock fell from the top and struck IE in the side of the face and neck. Injury was not the result of a training or compliance issue.
220261660038C12325IE was travelling into a job site with a shift foreman to inspect the work area. As EE was crawling up the walkway a rock dislodged from the top and struck EE in the back. Injury was not the result of a training or compliance issue.
220261660042C12245Employee was standing on deck of DM45 drill and the deck broke and fell off the drill with employee on it. While falling EE's right leg came into contact with the side of the drill causing two cuts that required 56 stitches.
220261660047C12416Employee was performing maintenance on the 650-scoop battery while the battery lid was open.  Employee began adding water to the battery; while performing the task the scoop battery lid shifted and unexpectedly and came down on EE's left arm
220261680015C12375IE was part of a crew building cribs on top of a steel set. A post was being hoisted up on top and struck a piece of v-deck that IE was standing on, causing EE to fall through. Injury was not the result of a training or compliance issue.
220261690013C13498Employee was helping load belt structure from the scoop bucket onto a flatcar.  The scoop rammed out, the structure slid off the flatcar and one of the chairs accidentally struck employee in EE's foot (fracture).   Employee has not missed work.  Also, EE was not diagnosed with a fracture to EE's toes until June 15, 2026 after the review of an MRI.
220261730047C13317IE was a passenger in a mantrip headed outby on the inby side of the mantrip, headed toward the elevator bottom. The mantrip entered a switch that had been left for the turn by an unknown individual. IE was thrown from the mantrip and suffered injury to EE's right knee. Injury was not the result of a training or compliance issue.
220261730050C13849Customer asked Employee to swap hose fittings on a mine-owned pump. After EE finished, Employee noticed a cam hose fitting was leaking.  Employee used a tool to tap the ear of the cam hose. The leak stopped, but as EE walked away, the cam hose fitting ruptured. Employee was struck by either the hose or cam fitting, causing a laceration to EEs face and bruises to EEs torso and knee.
220261730056C13758IE was working with another employee to offload a steel set parts crate from an irwin car. They were using lever bars to move the crate. The other employee's bar slipped and all of the weight was suddenly on IE's bar. This caused IE's finger to be caught between the bar and the elevated portion of the car's deck. Injury was not the result of a training or compliance issue.
220261740017C13398Two men were cutting holes in  drain pipe which unknowingly had oil inside. the torch ignited the oil and a flashback occurred. EE received first and second degree burns to EE's face and neck area. Both were taken to the ER to be checked out by a doctor. Both EE's were sent home that afternoon with ointment  to help with healing process.
220261740018C13368Two men were cutting holes in drain pipe which unknowingly had oil inside. The torch ignited the oil and a flashback occurred. EE received first degree burns to the back of EE's left arm and neck area. Both of the EE's were taken to the ER and checked out by a doctor. Both were sent home with ointment to help with the healing process.
220261800012C10732Mechanic stepped off a work scaffold and rolled/twisted EE's right ankle.
220261820008C11904A shaft employee was closing the concrete chute on an empty bucket and missed the latch.  By missing the latch it caused the chute to fall catching EE's right middle finger in a pinch point.
220261820041C11454Blaster retrieving supplies from the bed of pick up truck.  Foot became entangled in a blaster's tape and they tripped and fell out of the truck.
220261870012C10702Team member lost balance and fell with arm in an outstretched position
220261890014C11935The injured employee was standing by a coworker cutting conveyor belt with a knife when it came free and contacted EE on the right forearm resulting in a laceration that required seven sutures.
220261900004C12947The driver stated while tightening the lug nuts, EE had pressure on EE's left foot and EE's right foot was 6-8 inches off the ground while EE was applying pressure to the breaker bar. At that time, the breaker bar broke and EE fell over sideways causing EE's right leg to break above the ankle.
220261950001C11704EE was dumping a load of coal when the trailer started leaning. EE attempted to let it down but it was too late and truck turned over. Injuries to left shoulder and back.
