220260060008M11183Working foreman moving an agitator fell backwards after stepping onto a pallet and struck their neck on a metal I beam
220260060014M11574While climbing a pipe crossover, the individual's hands slipped from the handrail, causing a fall to the ground where they impacted their shoulder and elbow.
220260070004M10512employee rolled left ankle stepping off of a block 
220260070005M12486Employee driving the 585 was injured during loading at the 18 shovel. A large rock hit the inside of the box causing the operator to feel pain in the neck and hip area. THIS INCIDENT BECAME A RECORDABLE ON 1/6/26 WHEN EMPLOYEE RECEIVED RESTRICTIONS
220260070011M11383EE was lifting a mill bearing cap and the chain hoist hook stretched causing the cap to fall and graze EE's hard had and right cheek bone.
220260070013M11935Employee was working on Canica crusher in C5, and was under the belt tunnel removing covers to get to the belts and sheave when a piece of metal got under EE's safety glasses and into EE's eye.
220260070015M12987The morning of 1-3-26 @ 4:15am Employee was working on 92-11 in H.E. shop bay S1. The employee was in the process of removing a wiggins oil line with a 1 5/8 wrench, the wrench was on the fitting and they let loose of the wrench to reposition their body and the wrench fell off and chipped a tooth.
220260080001M12025EE says EE fell near the 1150 plant while cleaning up the tail section. The plant was not running at the time and most of the crew was working across from EE. EE allegedly injured EE's lower right back.
220260080006M11093A Crush and Convey employee rolled their right ankle while stepping off the crusher ring during maintenance. 
220260090004M11504Employees were putting a guard back on after replacing a bad idler when the guard slipped and hit one employee in the upper lip requiring six sutures.
220260090005M10642employee was working on a loader and got hydraulic fluid in eye.
220260090007M12065Ee was riding in bus that hit a large pothole. Ee reports being jarred in seat, resulting in back pain. Seen at ER and then at clinic, released to restrictions. Site cannot offer modified duty at this time.
220260090008M13007While removing starter from loader, part slipped, ee tried to stop it from falling, it caught on EE's glove, pulled EE's arm, causing pain in ee's left shoulder. Seen at ER, diagnosed with strain. Follow-up at clinic confirmed strain, referred to orthopedics and for MRI, released to restricted duty.
220260090009M12666Ee was staking voids. EE was walking on uneven ground and EE's foot caught between two rocks, EE lost EE's balance, fell, and felt a pop in EE's left foot. Seen at clinic, diagnosed with a fracture to left ankle, referred to orthopedics, released to restricted duty.
220260090010M11243Employee tripped while trying to replace one of the sorting screens within the plant and fell on a sheered edge of a doorway
220260090011M10792Employee Strained EE's back while using a filter wrench to change a fuel filter
220260090013M11093Process plant metallurgical technician was carrying samples in 5 gallon buckets when their back was strained.
220260090019M13708A Maintenance employee was in preparation of repairing the vertical support for the handrail. While grinding with a hand held wheel grinder, the employee while wearing safely glasses got some material in their eye. They reported that they got something in their eye and needed to see a doctor. The employee was directed to go to the emergency room and seek medical help.
220260090027M12466Employee initially stated that they began welding and the auto darkening feature on their helmet was delayed, which they believed caused a burn to the eye. They sought evaluation today, 1/7, and was diagnosed with a foreign body of the right eye.
220260120001M10852Employee stepped on a nail. puncturing through EE's left boot into EE's left big toe.
220260120003M11253Employee was removing material build up off of equipment. As they were chiseling the material, they felt a pop in their back.
220260130003M12005Employee walked to the shop to load parts into the company's truck. They said they started to feel funny. They passed out and fell on their back and hit their head on the ground. Ambulance was called.
220260130004M12065EE was walking out of the headframe heading towards the mill where EE slipped and fell on the ice from freezing rain. EE landed on EE's right arm trying to catch self and fractured EE's elbow from the fall.
220260130008M13267EE was clearing material from a blocked chute. After removing wet material, the dry material behind it broke loose and slid down the chute causing some hydrated lime to pass underneath EE's safety glasses and into EE's left eye. After rinsing with eye wash and going to ER, EE was prescribed eye drops for scratch on left eye.
220260130012M12526On 1/6/2026 the employee was issued restrictions following an appointment to provider for arm pain.  Employee was issued restriction and schedule for MRI. Initial information arm pain is caused by repetitive motion of lifting drill steel while bolting.
220260130013M12225Employee was climbing down the mounting ladder of EE's yard loader when EE missed the last step and fell to the ground. EE attempted to catch self by extending EE's left arm which resulted in a fracture to EE's left wrist.
220260130015M12716A laborer working in the Finishing Mills was cleaning a gypsum spillage. The employee was filling and carrying two five-gallon buckets; the employee stated their back was hurting and had trouble standing and walking with a sharp pain. They were treated for a back spasms.
220260130016M11534Employee was removing screens from shaker for cleaning when one of the screens caught the harness they were wearing causing them to fall and hurt a knee.
220260130018M11764We came back to work from the holiday and there was snow to clean up.  Employee slipped off a step outside the scale office.  Employee tore their quad tendon in their left leg.
220260130019M11474The transport vehicle employee was riding in hit a bump. The employee noticed a pop and pain in right knee as their legs were tossed from the bump.
220260130023M12055employee was starting up the plant. couldn't get dryer to start up. They locked out the power to the dryer, and went to try and turn it manually. While turning it their thumb got caught and they got a cut.
220260130024M13608Employees were removing a deflection plate from a lowered stacker. After communicating the plate was ready to fall, the fall zone was cleared. The plate was dropped and bounced into an employee striking a foot. Employee was transported to occupational health, x-rays were taken and found nothing broken. Health provider suggested over the counter meds and ice.
220260130028M12816Employee was kneeling on a conveyor belt in order to access a plug in a feeder box.    While unplugging the box, the conveyor belt unexpectedly started.  The employee was pulled down the belt and their right foot got stuck on a piece of steel and caused their right ankle to break.
220260140001M12796Employee (EE) was walking around a pilar to collect tools for a job when EE's feet slipped out from under EE and EE fell to the ground on EE's left shoulder. EE was seen at the clinic and diagnosed with a left shoulder strain and a left knee strain and released with restrictions
220260150004M11574Operator walking, overstepped end of EE's catwalk, causing EE's toe to catch the ground, causing EE to fall forward to the ground, landing on right shoulder.
220260150007M11614The employee was leaving EE's Shovel 6 assignment when EE made contact with a pothole in the haul road. The Employee states EE has strained EE's lower back pain.
220260150008M12225Employee was changing bits on undercutter. While changing the bits, employee tripped on a piece of rock, causing EE to fall against the undercutter bar. When falling against the cutter bar, employee bruised EE's left hand.
220260150013M13287Before the end of shift on 1/8/2026 employee was putting all their tools away in their suitcase. As they were lifting it to put the suitcase full of tools on the cart, they leaned too far and felt a sharp pain between their stomach and groin. They reported the incident to their supervisor on 1/9/2026 at the beginning of shift.
220260150014M12185Third party delivery driver of raw materials was found deceased trapped between the frame and dump bed of EE's I-Bar owned and operated delivery truck. The driver was located on the West edge of the iron ore stockpile.
220260150015M13718Employee was inspecting a Cobra water saw at the end of the day. EE was rotating the drive belt while listening for any obstructions or part failures and EE left EE's hand on the belt and it was pinched between the belt and the pully. This resulted in 5 stiches on the ring finger, it fractured on the tip and the tips fractured on the middle and pointer fingers as well.
220260150016M10772Employee was getting out of the skid steer and slipped and fell on their knee
220260150017M13568Employee went to put a flame in kiln 1, EE was standing on a 29" rolling ladder, there was pulverized coal dust still in the hood of the kiln, when they introduced a flare to ignite the coal, the kiln produced a blowback, knocked the employee to the ground from the 29" ladder and they sustained burn injuries to right arm and lower back, 2nd degree burns.
220260150018M12295Employee was doing maintenance on a conveyor belt. Employee was cutting rubber for a skirtboard with a utility knife. Employee cut themselves in the left hand through a leather glove. Employee required sutures to close the wound.
220260150026M12556On Monday, 01/12/2026, Souter Mechanic, was attempting to weld on machinery and received a slag burn to the inside of their ear. Mechanic had the welding torch positioned below them, and when welding the metal popped and a splash went into their left ear.
220260150027M13027EE was cutting wedge bolt from stationary jaw dye. While cutting the wedge bolt, the bolt sheared and made contact with EE's welding hood that they were wearing. The frame that holds the lens in the welding hood broke loose and lacerated EE above their left eye. EE received 12 stitches above left eye.
220260150028M10592Employee was washing a screen tower and twisted their back.
220260160001M11945The injured employee sprained/strained EE's right shoulder when rodding out a chute on the coal system. The upward and outward thrusting motion performed while holding the rod caused the injury.
220260160003M10852Fueler lost grip of hose while retracting, allowing end of hose to strike their face.
220260160004M12095Miner was welding the inside of a metal chute through a standing access point to the chute. There were bright reflections of light off the metal. Injury happened despite proper welding helmet/visor being worn.
220260200001M10792Around 8AM EE was working at the crusher. EE slipped on ice. Injured EE's back.
220260200007M10712EMPLOYEE WAS CUTTING A ZIP TIE AND CUT ARM. EMPLOYEE RECEIVED 5 STAPLES
220260200010M11644EE SLIPPED WHEN EXITING FROM EE'S PERSONAL VEHICLE UPON ARRIVAL AT THE OFFICE.  SUFFERED A LACERATION TO THE SCALP AND BRAIN BLEEDS WERE DETECTED WITH A BRAIN SCAN.
220260200011M13107While attempting to remove a filter cover using a pipe wrench, the cover broke loose and the pipe wrench lost grip and fell onto EE's right great toe. The injury has been identified as a right great toe contusion resulting from a falling object. Employee had medical evaluation and was released for light duty.
220260200016M11854IE clocked out went to EE's car and changed out of work boots and put on slides, went to the back of EE's car, stepped off asphalt into muddy area and fell. Broke 2 bones in EE's ankle.
220260200017M11955Employee's right hand was in the line of fire of a block and chain. The block and chain was under tension and shifted which struck employee's index finger. This resulted in a broken finger.      
220260200018M13598The worker was waiting for a container to be filled with degreaser. Although EE initially had EE's safety glasses on, EE removed them upon entering the room because the area was darker. During the filling process, the pump malfunctioned and the hose detached due to inadequate fastening, causing the product to splash directly onto the worker's face and eyes.
220260200019M12876Employee was working near the doorway at the alkali spray tower dump box when wind blew dust under EE's safety glasses.  This caused EE's left eye to become irritated.  This did not become reportable until the employee went to the doctor on 1/9/2026, when the doctor prescribed eyedrops.
220260200022M13458While monitoring a slurry tank pump due to abnormal noise and visible smoke, the employee was positioned in the area when material was unexpectedly expelled from the pump. The employee stepped backward and lost balance, resulting in contact with the ground. The employee reported an abrasion above the right eye and discomfort to the right hip.
220260200023M11894While employee was cleaning under the wash plant with a mini skid steer EE backed into the H beam which forced EE's arm and wrist into the boom lift lever which injured the employees wrist.
220260200024M11684Employee was filling water tank on piece of mining equipment.  When getting off of the tractor that was hauling the water tank, employee slipped and fell to the ground.
220260200025M10812Changing Screen. Old Screen Bottom Deck. Slipped fell on Conveyer below about 4' 
220260200028M11794While performing Alimak daily checks, an alarm was discovered causing it to not fully function.  Mine evacuation was prompted and then repairs were made returning it to service.  
220260200029M11093Employee alleges was in process of cleaning screens and fractured finger handling screen cleaning materials. 
220260200037M11564While pressure washing a company vehicle, EE attempted to crouch down to clean the lower portion of the vehicle when EE felt a sharp pain on EE's left knee.
220260200039M12305Employee was measuring a boulder, while navigating through the area employee was stepping up on boulders to see the shape, they felt pain in left groin area. Employee returned to work with restrictions, no lost time, no lost wages
220260200041M11233Lifting tarp that was covered in snow in order to cover tires.   While lifting tarp, they felt a slight pull in lower back.
220260200042M13678The employee was attempting to determine the cause of vibration alarms, and while feeling for vibration, their hand was able to enter the guarded area, which resulted in right pinky finger making contact with fan blades, resulting in the avulsion of the distal end of their finger. The employee did not lose the whole finger, but the flesh on the tip of their finger.
220260200045M10862An employee reported pain in knee after bending down to collect samples in tailings.  
220260200049M12546While an employee was laying on their back installing pusher bolts onto a steering cylinder pin, they experienced lower back pain. The employee was taken to the hospital the following shift for worsened pain and given medication and time away from work. 
220260200050M11113Stepped in deep mud with right leg.  Tried to move with left leg and it caused their right knee to hyperextend.
220260200051M12856A contract laborer was positioned on the downhill side of a brick rig used to install kiln brick when they sustained an injury. They had placed their right hand on the brick rig's platform and when the rig was moved a brick fell striking their hand. This resulting in 3 broken fingers.
220260200052M10872A haul truck operator was traveling on a haul road when the equipment struck a pothole.
220260200053M12917Employee was assisting with the replacement of a head-drum shaft bearing on the #1 screen conveyor on the Portable Plant. The chain that was used to support the head-drum and shaft assembly snapped, striking Tyler Whipple middle finger on left hand, fracturing the 3rd digit / tip of finger.
220260200054M10391Transferring from man-boat onto tugboat
220260210003M11383Employee was tightening bolts on crane wench. Socket came off bolt and employee contacted ground. CT scan positive for LT pelvis fracture.
220260210005M10802Employee suffered a soft tissue injury to the left ankle during routine travel. 
220260220002M13448Employee was climbing a fixed ladder to enter the 14 ball mill hopper to perform maintenance. The ladder has a hinge with a pin near the top.  The metal hinge broke. Employee held onto top part of ladder and fell, landing on EE's feet and then falling onto EE's rear. EE has a hair line compression fracture in the L1 and is on restricted duty.
220260220003M12836EE showed hearing loss after annual audiogram. EE was referred to an ENT specialist for follow up hearing test. EE showed similar hearing loss on follow up test as well. EE worked at mine sites previous to current employment and has history of shooting/loud hobby's outside of work. 
220260220004M11894Employee was performing a pre-shift on the shovel.  The employee was trying to open the door with their right hand.  The door was stuck, and the employee felt a pop in their right shoulder.
220260220008M10752EE slipped and fell while greasing EE's truck and injured EE's right ankle.
220260220010M12235Employee was relocating a waterline pipe in the shop to be fabricated and pinched EE's pinky finger between the pipe and floor when setting the pipe down.  Employee was taken to the urgent care to find a fractured fingered.
220260220012M10542going downstairs carrying a jump box and knee gave out
220260220015M13167On 1/6 Miner reported soreness to shoulder from welding on 1/4 for an extended period of time in an awkward position inside primary screen deck. Miner was treated conservatively with ice and stretching and continued work duties. On 1/14 incident became reportable when medical evaluation prescribed physical therapy.
220260220016M11063Employee was stepping off a ladder when they stepped onto uneven ground, causing them to roll their ankle.
220260220017M10642EE squished their finger between metal frame a piece of granite.
220260220018M13347Miner had completed sounding, mechanical and hand scaling of the back and ribs and was preparing to begin the bolting process. As the miner turned towards the machine a piece of rock bounced off their hard hat and shoulder before falling and contacting their left ankle resulting in a compound fracture and a fractured neck vertebrae.
220260220019M10862While the employee was cleaning M-14 Crusher, a rock impacted EE's middle-left finger.
220260220020M12395While working on the 17001 Pipe Truck, the employee was cutting zip ties leading to the alternator when the knife slipped, causing a laceration to the left hand on the end of their thumb. The employee later received 5 stitches at the ER.  
220260220021M12195The operator stepped out of a haul truck onto a rock that was partially underneath the cab of the haul truck when they rolled their left ankle. The employee was later evaluated at the ER and was discharged as a sprain. 
220260220024M11033Employee was stepping off a ladder when they stepped onto uneven ground, causing them to roll an ankle.
220260230002M11584Employee states EE sustained foot injury while removing under grate plates in cooler.  X-ray shows possible hairline fracture, RTW same day with restrictions.
220260230006M11313Overnight freeze led to a mud puddle near a service truck being partially frozen. Employee slipped on ice during plant inspection. 
220260230008M11584In occurrence while EE was assisting an EE, this EE stepped backwards onto EE's left foot causing a closed displacement fracture of the third metatarsal bone.
220260230009M11925Got on the forklift to do a pre-check.  Finished the pre-check.  Door was latched open to the body of the forklift and when EE reached back to pull the door close EE heard a pop in EE's bicep.
220260230011M13798K2 elevator stopped moving with contractor inside. Contacted Control Room approx 12:25pm. Attempts to get elevator to move unsuccessful. Contracted elevator service company called. MSHA notified of entrapment approx 12:55pm. Elevator service contractor tech arrived. Stuck person out approx 1:50pm. Contactor wheel was replaced. MSHA notified that person got out at approx 2:00pm
220260230012M10983Employee was trying to move a rock at the crusher and mashed left middle finger between two rocks.
220260230013M13187EE reports loading truck w/mud, making 2nd pass, hit return to dig button, lowered bucket halfway. Bucket stopped instantly, jarring them in the cab. They reported the incident 4 days later on 1/19, and sought treatment. Diagnosed with lumbar sprain, released with restrictions site cannot provide modified duty under.
220260230014M12285EE tripped while carrying a box of booster. Reached out with left hand/arm to break fall. Seen at ER, diagnosed with possible fracture, referred to ortho. Ortho appointment on 1/21 confirmed fracture. EE working restricted duty.
220260230015M11484EE received 2 stitches to Left cheek.  During attempts to remove a worn bit from cutter head, a punch hammer dislodged and struck Left side of face.
220260230016M11203While an employee was using a torch to thaw a water line, a Rock came off the plant and struck the employees right hand.
220260230018M13217Employee was helping replace the swing bracket on a Backhoe. EE was disassembling the crate that contained the new bracket. They struck a board downward on one side, causing the other side of the board to come up and strike them in the face. Employee's lip laceration was sutured and they were released with restrictions.
220260230019M11714CLP Ops Employee was sprayed in the eye by a mist of acidic solution while disassembling a diaphragm pump suction hose. Employee was wearing eye protection/safety glasses.
220260230021M13718Employee was working in a dusty environment. Later in the shift, they felt their eye irritated. At the end of shift, they flushed with eye wash solution. The next day, the eye condition remained the same, irritated. The following morning, they notified management that they wanted to go the clinic to have it checked out. At the clinic, employee was prescribed a steroid.
220260230022M11063While descending a step ladder in, EE felt the ladder wiggle and fell approximately 4 feet to the ground. 
220260260006M13077The employee was doing a repair on the PC#3 conveyor belt. While doing so, EE cut a V-notch on each end of the splice. While EE was cutting the belt notch with EE's left hand pulling toward self the blade passed the belt and EE cut EE's right middle finger causing a small laceration needing a few stitches.
220260260008M10441Employee injured left arm while fusing pipe 
220260260009M12385Employee was attempting to break frozen material on grizzly feeder using a 10lbs sledgehammer.  When swinging the hammer, employee caught EE's right index finger.  Resulted in laceration requiring 10 sutures.  Employee was wearing gloves.
220260260011M11804Employee was removing a pulley wheel of the primary shaker when the chain hook broke off striking the employee in the face area. The employee needed eye surgery to repair the eye. 
220260260012M13277Two employees and a contractor crane operator back a crane into position. One employee was in front and the other was in the back. The crane operator was backing and was not aware the employee in the back had placed themselves behind the crane and the employee was pinned between the hand rail and the crane injuring their leg.
220260260019M12456EMPLOYEE WALKED BETWEEN TWO PALLETS HOLDING LINER PLATES TO THROW AWAY TRASH. WHILE WALKING BACK, THE EMPLOYEE CAUGHT A FOOT ON THE LINER PLATE AND FELL ON THEIR LEFT SIDE. THEY FRACTURED A RIB ON THEIR LEFT SIDE AND BRUISED THEIR LEFT SHOULDER.
220260260020M11383While removing buckets from a bucket elevator employee got something in their eye.  Eye doctor removed and prescribed antibiotic eye drops
220260270012M10321Employee cut finger on equipment
220260270013M11734EE was walking along inclined catwalk during freezing temperatures. Ice had accumulated on catwalk causing slick conditions. EE slipped and fell resulting in injury to knee.
220260270014M11784Employee was descending the steps coming from the #1 dryer hummer screen platform (Calcination) when one of the steps broke from under them causing them to fall to the next step.
220260270015M12375While employee was attempting to open a pipe gate, middle finger on right hand got caught in between a cross piece and the lock on the gate. When the EE tried to pull their finger loose, they ended up pulling off the tip of their finger.
220260270016M12165The operator was climbing the stairs to the haul truck and tripped over the second to last step from the top. The operator reached their hands out to catch themselves on the deck and upon impact hurt their shoulder. 
220260270017M10692Nobody saw the accident and we have not been able to interview the EE
220260270018M13838Was hauling out excess powder from storage tank.  Was using rod tool to A-line loading spout to opening in top of the dust truck.  Was pulling rod toward them when rod slipped off the spout, momentum carried them off the platform they were standing on.  Platform is a portable platform with steps and handrailing on both sides.  They landed on the froze ground and broke Right Ankle.
220260270019M11043Until the fire investigation is complete, we are unable to determine the cause of the fire to the truck.
220260280002M11804Employee was finishing up a belt discharge on 72-5. When EE was closing the doors on the crusher EE pinched EE's palm between the door and the lock post causing a 2-inch laceration
220260280005M11103Employee alleged that EE wiped EE's eye and inadvertently transferred something from EE's glove into EE's eye.
220260280006M11945K2 Elevator stopped between 6&7 floor w/ contractor inside @ 13:24. MSHA called 13:55 ref. 04940914. Service contractor notified & arrived 15:25. Stuck person out at 16:03. MSHA notified 16:04. 
220260280009M12846EE entered into Otis freight elevator to get to another floor in the Pellet Plant while performing operational rounds.  Elevator stopped operating.  While on the phone with the MSHA OneCall, elevator technician arrived onsite & EE was able to exit the elevator. No injury to employee.
220260280010M11203While removing a blockage from silo 42 material flowed from a 3" access port causing cement to get into the miner's ear.
220260280012M12055Employee was cleaning the floor with a broom when EE's hand contacted a cabinet that had a sharp object sticking out.  EE had a small laceration on EE's right pointer finger knuckle that required stitches.
220260280018M12496Employee was standing near head pulley on C-5 and radioed the operator to start the belt.  When started the torque arm holding the gear box assembly broke free allowing the assembly to spin forward.  The assembly struck the employee in the left leg.
220260280019M11624Equipment operator was exiting the rear passenger seat of a pickup truck and stuck their knee against the door causing injury. Operator was place on restrictions.
220260280020M13758Contact person was called by the Illinois Tollway on the afternoon of 1/27/26 about a missing person that was suicidal that may have jumped in the West Quarry off of the 80/94 tollway. Second contact was contacted around 4:00PM to come help search the West Quarry. At around 4:50PM the body of the trespasser was found and reported to authority's and the department of labor.
220260280021M12897While trying to line up pipe on the leach pad employee slipped and fell on right arm causing pain. Employee later went to the hospital for x-rays that came back negative, was referred to an ortho doctor. Employee came back to work the following day on restricted duty with their right arm.
220260280023M10993Tailings operator was walking up to west centerline when they stepped in mud and rolled left ankle.
220260280026M13237Ee reports pulling on diesel hose after fueling up equipment, feeling sharp, twisting pain in abdomen. Finished fueling, after about 20 minutes they threw up. Continued to fuel island, parked, went to blue room, threw up. Reported to lead, transported to ER, diagnosed with hernia, referred for surgery. Working restricted.
220260290001M11985Miner was completing work on a table in the lab, when EE dropped an item on the floor.  As EE bent over to retrieve the item, EE struck the right side of EE's forehead on a corner of the work table.
220260290002M11844Ee was changing an impact slide on stacker #2. Impact slide fell, smashing ee's pinky. Seen at ER, xrays negative for fracture, wound closed with sutures, and ee released to full duty.
220260290003M12626A SCD operator was replacing the drive belt on a conveyor when EE's gloved right hand became entangled in the sheave due to not performing lock out tag out. The miner sustained multiple injuries, including a fracture and multiple lacerations, to EE's right hand.
220260290004M11804Employee was cleaning the Dc box for the ball mill when they felt something fall between their glasses. Employee felt like something got in their eye and started to flush them out.
220260290005M11283EE was walking to the water pump when EE felt a pain in EE's right leg area was clean of debris and it was just getting dark out
220260290006M10922The operator exited the cab and unintentionally inhaled turbo fumes when exiting haul truck.
220260290007M12055During the hoist exam when the hoisting engineer started EE's shift, EE discovered that a bolt was broken on the north brake pedestal on the service hoist.  The hoist was locked out until repairs are made.
220260290009M11343When attempting to clear packaging jam, teammate hand was pinched between conveyors, abrasions resulted, modified duty and medication.
220260290010M12786IE was cleaning a silo spill. IE was pushing a pile of sand through the scale. At the end of the scale, the scale meets concrete and there is a small rise. The bucket clipped the concrete causing the IE's impact on the windshield. IE had a hard hat on; the brim caused the gash.
220260290011M12786While clearing frozen sand rocks from the Alpha hopper, employee was stepping down to the ground and slipped on their final step. They were able to catch themselves and did not fall; however, during the slip they sustained a cut to their left leg from contact with a metal edge.
220260290012M11664Employee was assisting in troubleshooting an ammonia pump when a mist of aqueous ammonia came from the work area and made contact with the side of their face and eye.
220260290014M12636The employee was walking up the Mill stairwell for lunch break and looked up. When the employee looked up, a piece of dirt fell into the employee's right eye, causing irritation. The employee was treated with a prescription eye drop at the on-site medical clinic.
220260290016M13067EE was walking from the Shop to the ready line to get in their haul truck when they slipped on a section of ice approximately 18 inches wide by 24 inches long. Roadway and walkway was cleared but miner did not see this small section when walking. Miner was prescribed a muscle relaxer and returned to work.
220260300001M10401Employee was walking & rolled EE's ankle
220260300005M11423Employee fell from a chair roughly 56" inches from the ground. On impact, majority of body wait landed on the the left elbow causing a sprain.
220260300007M10872While working on a crusher, the miner slipped and fell onto EE's shoulder causing pain.
220260300008M10772Employee slipped while grabbing tools from truck due to the muddy conditions.
220260300009M12626EE was cutting electrical tape off the wire connections while wires were in junction box. EE was using a ceramic knife and had on cut level 4 gloves. While cutting the second wire connection the knife blade went across EE's left palm causing a 2 inch laceration.
220260300013M13738Employee was rigging up the cone ring to remove it from the cone. It got bound up at an angle and would not move. EE reset the rigging then started to descend from cone. The cone ring did not have any pressure from the rigging. Descending from the cone onto the platform EE put EE's hand out for support, the ring fell into its resting position just 2" from bound position.
220260300014M12125Employee was de-icing sidewalk flatfooted on both feet. EE slipped on ice and landed on EE's back. EE was wearing EE's hard hat and as EE fell the hard hat bill forced EE's head to go forward straining EE's neck.
220260300016M12015Team member was clearing a bag jam on the palletizer in plant 1 packaging line. When lifting a 25KG bag off the conveyor the employee allegedly felt discomfort in the front part of EE's right shoulder.
220260300017M12526Maintenance employee hurt right forearm while chipping ice off BC2120 head wheel. Employee was using an electric demo chisel in the blistering cold weather around 11:30pm Sunday Jan. 25th. Both their forearm and elbow hurts with numbness in right hand.
220260300018M13448The employee picked up one end of a small piece of steel dredge pipe located toward the front of their pickup bed and slid it toward the rear of the truck near the tailgate so it could be removed by a forklift. After setting the pipe down near the tailgate, the employee experienced back pain and was determined to have sustained a back strain.
220260300020M12035EE was lifting a full oxygen bottle into a UTV and during this task the bottle slipped pinching their right ring finger in between the bottle and tailgate causing a laceration and fracture of the finger.
220260300021M12826Employee was performing housekeeping duties to mitigate slip hazards of ice and ended up slipping on that ice, resulting in a fall on their left knee. Employee refused medical treatment and continued work the remainder of the day. Employee woke the next morning with a swollen knee.
220260300022M11343Employee was shoveling sand when they bent down to get more sand with shovel, they twisted their back and continued until it worsened.
220260300025M12055In production area a miner was affected when in the task of filling big bags with final product where the thumb of the right hand was pricked between the ear of the big bag and fork section of the forklift
220260300028M10722Employee twisted an ankle after stepping into shallow puddle with a rock
220260300030M13798EE was using a cordless impact to undo bolts on the CR1 flywheel. EE positioned a hand behind the sheave, between the crusher frame and the nut to hold the nut when it broke free. When the bolt broke loose, the nut followed the threads, moving backward and pinching the employees finger between the nut and the frame. EE was brought to get X-rays where a fracture was discovered.
220260350001M10602Associate Slipped on patch of ice and injured EE's right leg
220260350004M11774EE got out of telehandler and stepped on a metal pan which was on the ground in the path of EE. EE's foot slipped on metal pan. EE fell to ground causing fracture to left wrist.
220260350006M10532Noise-induced hearing loss in accordance with Part 50
220260350007M13107While inspecting overhead conduit for shorts and looking up, product fell between an EE's eye protection and hard hat from above and entered their eyes. The EE and supervisor flushed the eyes, but the EE was still feeling discomfort and pain in the right eye and was transported to an eye clinic for treatment.
220260350011M13047On 1/10/26, EE was cleaning a plugged chute and experienced pain in EE's right shoulder. EE evaluated by doctor immediately and was not given any work restrictions that prevented EE from completing EE's normal job duties. On a follow-up appointment on 1/29/26, EE was issued a restriction to be off work.
220260350012M12917While unclogging FD5 back mixer, operator was trying to move the stuck turbulizer to get it to rotate and continue cleaning. The turbulizer broke free and  the paddle struck the operator's right palm resulting in a laceration that required medical attention. The operator needed 12 stitches.
220260350014M13638EE was walking towards EE's office when EE tripped on a rug causing EE to fall forward landing on both knees. EE then noticed blood seeping through EE's jeans at the right knee. Upon inspecting knee, EE noticed a laceration measuring about 4 inches in length across EE's right knee.  EE went to Mercy Jefferson ER where EE received 12 stitches to close the wound.
220260350018M10932Contractors were entrapped in an elevator for 3hrs due to an over-speed sensor being tripped.
220260350019M11534Contractors were using the personnel elevator in the PHT, Six people and scaffolding were cramped in the car leading to an accidental push of the E-Stop.
220260350020M13518While assisting in barge movement on the lower dock, an employee was struck by a 2" Three Strand twisted polypropylene rope snapback after the rope failed under tension. The force of the line propelled the employee's arm into their chest and mouth, resulting in a fractured tooth requiring a crown, along with contusions and to the lower arm and hand.
220260350023M11564Process supervisor was pulling a water hose when it became caught on something and caused the person to lose balance and fall. A restricted injury occurred.
220260350024M13418Based on employee's account of this, employee was stepping off the step ladder when EE's right foot slipped off the bottom step.  This caused EE's right toes to bend and when the right foot / toes hit the ground, all EE's weight was on EE's right foot / toes.  Employee did not mention it to EE's supervisor until the afternoon of 1/26/2026.
220260350025M11975Loader operator was entering the loader and placed hand on door jamb. Door closed on operators right hand middle finger. Operator required 12 stitches in right hand middle finger due to laceration.
220260350028M13758Employee was attempting to move an airslide in Silo 2 to clean it out when they felt pain in groin area. They reported it that day but continued work, the next day they felt worse and was taken in to get it checked out. The ER determined a partial muscle tear in the groin area. Employee has been placed on light duty and unable to lift more than 10lbs until cleared by a Dr.
220260350029M11884MINER SAID THE NEXT MORNING WHEN THEY CAME TO WORK THAT THEY THINK THEY MAY HAVE INJURED THEIR SHOULDER UNHOOKING A FIFTH WHEEL THE DAY BEFORE BECAUSE THEIR SHOULDER WAS SORE THE NEXT DAY.
220260350030M13728An employee was using a 4-inch angle grinder when debris went underneath EE's safety glasses and irritated EE's right eye.  The employee stated EE could not use face shield at the time because EE was in very tight quarters while grinding. The employee was taken to E.R., where EE's eye was flushed and the debris removed.  EE was given a full release with no restrictions.
220260350031M10782Inspection mode switch faulty causing the production hoist to be unavailable. 
220260350032M13798A quarry truck driver sustained a left index finger pinch injury while manually moving a ~288 lb motor that was left obstructing the Secondary Crusher Hoist way walkway. With the hoist out of service, a pony bar was inserted in the lifting eye so two employees could lift it onto a pallet. During the lift, the motor shifted and slid down the bar, pinching the employee's finger.
220260350033M10522Utility power outage caused hoist to be unavailable.
220260350034M11233while changing the injectors on truck an employee accidently turned the key and the tip of and right middle finger was cut.
220260350036M11013Employee was stepping out of van when they stepped onto uneven terrain and twisted their right ankle.
220260350040M13117Maintenance Technician (M1) was tasked with installing the track on a Bulldozer. M1 used a hammer to align the track master link. During master link alignment M1 felt flying debris enter their right eye. M1 was transported to the onsite clinic for evaluation and then transported to an offsite medical facility.
220260350042M10572Slip and fall leading to twisted ankle, possible fracture
220260350043M12756Employee was pushing a small pile of material with their right foot in a sweeping motion, when their left foot slipped on loose material. Instead of falling forward, they leaned back and turned their body in a twisting motion, during which time they felt a pop in their knee.
220260350044M11033While accessing a generator, an employee slipped and fell on their backside, causing pain and bruising.
220260350046M11864Employee had just climbed up a ladder to a catwalk to start a engine. They climbed down and as they got the ground it was muddy so it caused them to slip and land awkwardly on their leg.
220260350047M11433Employee was opening and removing an inspection door on a LOTOTO clinker cooler fan. The door fell forward onto the EE's hand breaking a finger
220260350048M13418The miner was working on removing a bearing from a motor mount assembly. A small pry bar was being used to remove the bearing. The pry bar was under load when the miner struck the shaft with a hammer. The pry bar released and struck the miner in right cheek near the nose. The impact caused a laceration which required stitches and CT scans.
220260350052M11303EE was inspecting engine bay on loader. Shocks on engine bay door loader failed. Overhead door fell and hit EE on top of the head.
220260350053M11033The backup monitor fell from the mount and struck the haul truck operator on the left side of the head.
220260350054M11383Plant Manager was reversing the rotation(polarity) of the sand screw motor at the electrical panel which created an arc flash in the panel
220260350057M13197Employee was in a haul truck when a rock fell and jarred the truck.  Employee complained of back pain and utilized the RICE treatment until the January 24th. Up until the 24th, the employee stated multiple times they were feeling better each day.  Employee went to ER with back pain and was released with prescriptions.
220260360001M11484while inflating a bag to separate granite piece from wall the bag blew up causing the rope and hose made contact with EE's hand and caused an injury
220260360002M11363While moving a long handled scraper the handle hit a beam overhead that dropped dust on top of employee and EE got some in EE's left eye
220260360006M10742Pulley bearing failed and caught fire leading to drive tower/belt #1 fire.
220260360007M11193while dumping aggregate in a haul truck on level ground, the cab laid over causing the operator to fracture right knee.
220260360010M13788Employee was lifting multiple 5 gal buckets of rocks up to a makeshift chute for clean up. They started to feel lower back pain but continued thinking it was only a muscle issue. They took the next day off day due to pain and returned the next day and reported it. They aggravated a previous injury and inflamed the area, the Dr placed them on light duty for 5 days until review
220260360011M12315Employee was running a walk behind skid steer removing snow around the scale-house. Employee was backing up and backed into a concrete bollard hitting right leg causing a large hematoma. Employee was sent to hospital via ambulance.
220260370001M13057Maintenance technician was insulating piping, EE was holding a water line while cutting the insulation to fit. The pipe shifted in the middle of EE's cut, and EE cut EE's left pinkie finger. EE was taken to local urgent care where EE received 4 stitches. EE was then released to work with no restrictions.
220260370010M10892Climbing the ladder to the midwestern screens and heard a popping noise on EE's left arm.
220260370012M11484Maintenance Mechanic's middle left finger was pinched between an hoist cable and block's sheave, resulting in a laceration and fractured finger tip.
220260370014M11854The Supervisor had placed their left hand in the line of fire for the 590 gate pneumatic cylinder. When the cylinder change positions their left hand was pinned while hold a flashlight.
220260370017M13207While performing a drilling task, the operator was applying manual pressure to the tool. The drill bit snapped unexpectedly under tension. The sudden release of resistance caused the operator's hand to lunge forward, striking the jagged edge of the broken bit and resulting in a puncture wound to the right index finger.
220260370018M10512hurt their shoulder while swinging a sledge hammer.
220260370020M10291Employee was struck by a rock
220260370025M11864Employee was in shop getting metal for plant, they walked around back of truck hitting right shin on hitch could not maintain balance and fell to ground causing a fracture to left femur.
220260370026M12235Maintenance employee was walking in the Breezeway and slipped and fell on some ice, landing on their shoulder. The area was previously clearing of bulk ice accumulation and de icer pellets applied before the slip occurred. 
220260370027M13808Employee was being transported to the west pit by a supervisor when they stepped out of the truck and slipped on ice and landed on right hip and right elbow. After onsite evaluation it was determined to take them to the ER for imaging to ensure no further injuries. Employee was diagnosed with a strained shoulder, put on restricted duty and instructed to follow-up with an ortho.
220260400001M10471Alleged possible UOIF - reportable hearing loss
220260400002M10251Hand too close to grinder
220260400003M10482Alleged possible noise - Reportable hearing loss
220260400004M11433Employee poked the beat roller on the side belt of the powerscreen with a shovel to get it to turn and experienced pain in left chest/rib area.
220260400005M10812Employee was de-icing equipment and slipped on ice resulting in 2 fractured ribs.
220260400006M11995EE was walking down the stairs from the K3/K4 burner floor towards the K4 coal mill while carrying samples. EE stepped down from the last step in the stairs, rolled EE's ankle and fell to the ground.
220260400007M11754EE was using a log chain to adjust the stone under the radius. EE put the lug too tight against the stone and when EE released the stone to advance it fell back on EE's ankle.
220260400010M11744Employee was loosening a bold on a Derrick Screen system during a screen change.  The nut gave way while EE was using a wrench and the employee felt a "pop" in EE's shoulder.
220260400011M13488Plant employee was using a utility knife to cut holes in skirt rubber for installation on screen shaker. During the cutting process, the tip of the blade broke, causing the knife to slip and resulting in a laceration to the employee's left arm above the wrist. The employee received 6 staples for the injury and placed on light duty for seven days.
220260400012M11073MTM was lifting Milwaukee battery operated come-along that was in the case from the floor to EE's plant kat
220260400013M12546Employee sustained a laceration to right hand ring finger when it was cut by a burr on the inside of the drill pipe and received 5 sutures. Employee identified one of the burrs, but not the second. EE had Impact Cut 5 gloves on at the time of occurrence.
220260400018M10361CARPAL TUNNEL BOTH WRISTS AND ELBOWS
220260400019M10802Employee was getting out of the blade when EE felt pain in EE's upper right arm.
220260400022M10341Cubical tunnel surgery left elbow.
220260400024M11343EE was splitting stone with hammer and chisel. The Chisel slipped in EE's hand, and EE accidentally struck EE's thumb with the hammer.
220260400026M11413Employee was working on the screws in the lower plant. When they finished their task, they began to experience pain in their left lower back.
220260400027M12055EMPLOYEE WAS REMOVING BOLTS FROM A DRIVE LINE IN A HAUL TRUCK. WHILE TRYING TO LOOSEN ONE OF THE BOLTS, THEY FELT SOMETHING PULL IN RIGHT SHOULDER. THEY HAD A SHARP PAIN FOR A SHORT WHILE THEN IT SUBSIDED.
220260400028M11313An employee positioning a used return roller for a conveyor pinched their left index finger, resulting in a laceration and sutures.
220260400029M13718To maintain safe access, employee was cleaning undercarriage on excavator with a short-handled scraper. As employee was cleaning, they struck steel and jarred their shoulder. Employee was seen at a clinic, returned to work full duty, after a period of improvement, on 2/2, clinic referred employee for physical therapy. continues to work full duty, but PT makes it an MTI
220260400031M12135EE states that while using a pocketknife to cut tape, the blade did not lock fully and folded into left hand resulting in a small cut. The EE was taken to urgent care which resulted in the application of 1 stitch.
220260400033M12556Miner clocked in from lunch and was using their phone while walking. There was a wheel chock out in open space that led to them tripping and the miner fell. The fall then apparently caused a fracture to the proximal end of the radius bone in the left arm.
220260400035M13758While removing liners from the Coal Mill, a fragment broke off while hitting it with a rivet buster. A worker attending nearby was hit by the projectile, which was embedded approx. 2cm into their right thigh. Employee is scheduled to have it removed in surgery on 02/12/26. Employee is currently on restricted duty and another method for liner removal is being evaluated now.
220260400036M11093Employee was stepping up onto a sky trac (approximately 24 inches high) when they slipped and fell backwards.
220260400042M12395On 1.31.26 between 3:00 PM and 4:00 PM Staderian, employee fell twice while attempting to de-ice a conveyor that had began to travel differently due to weather conditions at the time. ( Miner is currently out pending Orthopedic evaluation)
220260400043M11824While removing old teeth off a bucket from a loader the technician was striking the old tooth with a hammer and a chunk of the tooth broke off and struck the bicep of the right arm. 
220260410004M10872EE pinched EE's right, index finger between the bar and wall while clearing a rock jam.
220260410007M10882EE was struck by belt from behind causing EE to come in contact with belt rolling frame.
220260410008M11464Razor knife was stuck in the wire nut. When employee was trying to dislodge the knife, it sliced their forearm. Employee had to have six stitches.
220260410009M10341BILATERAL CARPAL TUNNEL RIGHT HAND
220260410010M10371CARPAL TUNNEL IN LEFT AND RIGHT HANDS
220260410011M13147EE sustained a partial amputation at the distal portion of the left middle finger-(middle of the nail bed) when the finger was caught between two pieces of metal grating. Injury involved loss of tissue and bone at the fingertip. EE received medical evaluation and will received surgical surgery to smooth fingertip
220260410012M12957IP was changing a light on a haul truck and lost control of wrench, which flew back and lacerated their lip. Supervisor called over the emergency line at 12:38pm and arrived at Lark Gate to see EMT at 13:00. EMT cleaned the laceration and sent them to a clinic to get the laceration stitched up.
220260410013M12596While laying under a dump truck employee went to turn and reach for a cable and their foot got caught under the axel.  The foot and knee didn't twist with the rest of their body, causing them to twist their knee.  Employee did not report injury until 2/3/2026
220260410014M13728EE reported to management at 6:50am on the morning of 02/05/2026 that they had been experiencing lower back pain since 01/31/2026 and that they had received medical treatment and been released without restriction on 02/03/2026 and called off of work on 02/04/2026. EE was seen at a clinic at 11:30am on 02/05/2026 and was instructed to not return to work until 02/09/2026.
220260410015M11784While a miner was stepping off powder truck, they stepped on a rock and rolled their ankle. They were transported to the hospital for evaluation resulting in time away from work.
220260420001M10672unspecified metacarpal bone fracture while performing housekeeping 
220260420002M10942EE was filling a can with hydraulic fluid and a tiny splash went into the right eye of the EE.
220260420003M12436Supervisor was reporting to work and was experiencing chest pains and shortness of breath when they arrived for their shift. Emergency services were called and employee was taken to the emergency room. Determined as a non-work related illness.
220260420006M11243EE was cutting a zip tie with a utility knife and cut EE's hand resulting in receiving stitches.  Returned to work same day.
220260420010M11594While removing slide above screw conveyor material inside the hopper moved and dust came out of the gap left from the slide removal and got into employees eyes
220260420011M13638EE was hauling tailing pond waste in a Volvo A60. When the EE attempted to dump the material about 30 tons remained frozen in the box and when putting the box back down it slammed hard, shaking the cab and operator. EE did not seek medical attention at the time of the incident. Work restrictions issued on 2/5 following ongoing discomfort and medical treatment. 
220260420012M12245IW approached a small crane that was beginning operations. EE failed to alert the operator of EE's whereabouts. EE then stood in a blind spot for the operator and as the outriggers were being lowered EE got EE's foot caught.
220260420015M12546While changing cutting edges on a 992 loader bucket, employee reached under to check if bolt was spinning or not. While grabbing the bolt the employee accidentally pulled the trigger on the impact gun and turned the bolt causing it to slice their finger.
220260420017M11383While walking through the mud, the employee's feet became stuck. During an attempt to free themselves, they felt a pop in their left knee.
220260420018M11674Tripped over a hose causing miner to fall on pallet of conveyor rollers hitting their ribs and forehead inside the stone building adjacent to the maintenance building.
220260420021M12596Employee was picking up parts for their task and one of the required parts the employee needed was a cylinder for the dust curtain on the drill. While lifting the cylinder, the employee stood upright and experienced a sharp pain on the left side of the body. 
220260420022M12155Employee was shoveling frozen material from under a conveyor belt.  Employee went home and their back started hurting.  Employee had a strained lower back muscle and was prescribed a steroid pack and muscle relaxer.
220260420023M11524During a maintenance activity, a maintenance employee was replacing some dust collector ducting in the tunnel when they pinch their right index finger. 
220260420024M11113EE stepped on the wheel of a creeper that was leanded against a piece of mobile equipment causing a trip/fall. 
220260420025M11123Loadout operator was starting the process of opening lids of a OTR truck at that time EE twisted ankle and fell.
220260420026M10341Backing over a berm while dumping 
220260430001M11143Using hammer to remove ball bearing from shaft, a small piece of metal (less than 3mm) went into skin in neck area
220260430003M13247Maintenance employee was working in the plant and at some point, in time EE debris in EE's eye.  EE flushed it out, but it was still irritated so EE went to the eye doctor to make sure the debris was not still present.  The eye doctor prescribed eye drops for the irritation. Employee was able to return to work immediately.
220260430005M12426PHoist did not pass pinion brake checks. A mechanic was called to adjust, and upon inspection, it was found that an electrical contact in the pinion brake caliper had corroded and was broken. An evac was called while repairs were being made. 
220260430006M10371EE was at work and suffered a stroke.
220260430007M13838A quarry operator exited the CAT D9 Dozer to end their shift. As they were getting off the equipment, they stepped on the tracks of the dozer. Their right foot slipped and went out from underneath them. They fell onto the blade pusharm grab handle. The following day, they sought medical treatment, were referred to an orthopedic specialist, and were placed on restricted work duty. 
220260430008M11183While attempting to make a U-turn on the UTV, the UTV turned onto its side. This resulted in injury to the right hand.
220260430009M11433A employee sustained a bursting laceration to the middle finger of their left hand when it became pinched between two pieces of 3/4-inch steel.
220260430010M10411Employee slipped off conveyor tail pulley
220260430014M11674EE found that the doors for the clinker elevator would not open at top landing. EE used the descending device on the elevator to bring themselves down to ground level.
220260430017M12666An employee was operating a CAT 982M loader to clean out scaling material from a heading underground. On the last load out the bucket made contact with a blasting cap that had not detonated when the heading was shot.  There was no damage to the loader and no injury.
220260430018M11574The employee was pushing a scrap skip weighing approx. 2200 pounds across the Filter floor on a pallet jack when the employee felt a pop in their right calf.
220260440001M10902Electrical contactor failed causing the production hoist to be unavailable for operation. 
220260440002M13668EE was removing an impeller from a pump. The crew attached a hanger to the impeller and EE began to backspin the shaft by pulling the belt. The momentum of the belt pulled EE's finger between the belt and the sheave. EE jerked EE's hand out, but EE's glove remained pinched. The event degloved skin and the fingernail and crushed the tip of EE's right middle finger.
220260440003M11634The employee stepped onto uneven ground and fell forward, after getting the MRI results during a follow up visit on 2-6-2026 EE was diagnosed with a torn hamstring
220260440004M13518A water truck air hose burst & the brakes locked on while going down a dirt road, incline 5.35%. The driver thought the brakes weren't working. EE tried the foot pedal & air actuator & gearing down. Once in neutral EE could not get it back in gear. EE steered the truck off road and jumped while going around 15-20 mph. Driver strained EE's hamstring.
220260440006M11303Operator was using a portable bandsaw cutting uni-strut when the bandsaw came into contact with EE's forearm causing a laceration.
220260440012M13458Employees onsite smelled smoke at the beginning of the shift. Production supervisor went to see where smoke was coming from and observed a fire adjacent to mine property. At the end of the shift around 6:00 pm the fire had spread to mine property, so production supervisor call the fire department. No employee injuries and no mine asset damage.
220260440015M10582EE tripped going into porta potty, and fell to the ground.
220260440017M11724Employee was using a personal knife to cut off a piece of tread from their boot. When the employee attempted to close the knife, they closed it on their left middle finger.
220260480001M11604Two employees were loading a screen into the back of a service truck when one got EE's finger between the screen and the tailgate causing a crushing type injury
220260480004M12235Coworker was walking up stairs to the parts room above the office when EE felt a pop in EE's knee. No slip, trip, or fall occurred. Coworker was evaluated at Nason Occupational Health and was prescribed a hinged knee brace.
220260480009M13788Employee was reinstalling the bonnet on the 307-A motor. During this process EE felt a strain in the lower left side of EE's back. EE reported it to EE's supervisor and continued working until 10:30 pm. The next morning EE felt stiff and was experiencing some discomfort so EE went to the local clinic. EE was diagnosed with a muscle strain and prescribed a mild muscle relaxer.
220260480010M13508The EE walked to a roadside berm that had 2 feet wide opening to allow water to exit the roadway into a ditch. While standing at this opening, the ice underneath EE broke, causing EE to lose EE's balance. EE then slid down the ditch wall 4 feet before EE's left foot contacted a tree branch. This contact resulted in a dislocated and fractured ankle.
220260480012M11413while attempting to make a U-turn on the UTV, the UTV turned onto its side. This resulted in injury to lower back, right flank and right hip.
220260480014M10782Employee alleges that a wrench slipped from their hand and injured their foot.
220260480015M11654EE was in the process of repairing the hydrated lime blowers when the wind blew dust into EE's right eye. Safety glasses were worn during the completion of the task.
220260480017M11153EE squatting down to put a bolt and not in a belt skirt and EE's left foot slid causing EE to injure EE's left knee
220260480020M13277The employee and a contractor were removing an inspection cover from the top of the clinker cooler drag-chain. The employee's tip of pinky finger on left hand became pinched between the bottom of the cover and a metal flange as they placed the cover on the ground. The employee's fingernail was almost avulsed from the nail bed
220260480022M13478Employee opening Kiln 2 firing hood door to rake ash. Upon releasing handle, dust entered behind safety glasses and into right eye. Employee rinsed at eyewash station, later sought clinic care and was prescribed eye ointment. Required additional PPE for task was not worn. Employee returned same day, no restrictions; retraining conducted 2/10/26.
220260480023M12215EE was cleaning out a rock and snow jam with a digging bar when a rock fell down and struck a finger which was holding the digging bar. Closed fracture of right ring finger. EE on restricted duty, but never lost any time.
220260480024M11263An employee fell while walking. While attempting to catch themselves, they sustained lacerations to their left hand and chin. 
220260480026M11644Truck Operator stopped the Mine Captain and stated that they had hit a small bump in the road in 2096. After hitting the bump, they felt a pain in their lower back.
220260480028M11514Employee was climbing up ladder to a conveyor and felt a shoulder pop. After being checked by medical it was determined that their shoulder dislocated.
220260480031M13217Around 2:30 pm, a mechanic while working in the FM1 separator at the time of positioning a come-a-long above their head, dust got loose and fell into their left eye. They flushed their eye and were taken to Urgent Care where medical evaluated and diagnosed with a corneal abrasion of the left eye, without a foreign body.
220260480033M12085Two employees had checked a belt and were walking on the lower level of the screen plant when a rock from the next level up fell over toe board striking one of the employees on top/right side of their head.  
220260480035M12045While a miner was closing a haul truck door, they pinched their thumb. They received first aid on site and transported to the hospital for further treatment where they received 3 stitches to their finger.
220260490001M12706Employee had to stretch to get a plastic cover over a super-sack; in doing so, the employee slipped and fell. Upon impact, the employee's left thumb was jammed into the side of the pallet. The employee was able to stand up but was unable to move EE's thumb without pain.
220260490004M11985EE opened an air line to bleed the system and forgot to turn off a ball valve at the air tank causing the air line that runs under the building to come up and out of the hole and hit EE in the head.
220260490005M11874During mine rescue training the employee stood up from the manikin, turned, took a step, tripped, and fell on concrete pad by the mine rescue building fracturing their left little finger.
220260490012M12355The employee was moving a generator and dismounted the machine to pick up a power cord dragging the ground. While returning to the machine, the operator slipped on ice that was on the road and fell. The fall resulted in one broken rib.
220260490014M12205Employee suffered minute hand fracture (diagnosed via x-ray at urgent care) on Feb 12, 2026, ~10AM CST when loose bearing fell on left hand while working on IBC4 pulley at batch plant. No meds prescribed; first aid only.
220260490016M13849On Feb 6, 2026, subcontractor, employee of Micronics (CRI MSHA ID C6220) was carrying blow pipes into the Keystone Cement Machine Shop. Leaving, their thumb was caught above the knuckle in a heavy counterweight-driven self-closing door that shut quickly and forcefully, causing a severe injury. The required stitches. The door's counterweight made it close fast, increasing the hazard
220260490017M12506The IE was walking down a flight of steps. On the last one they stepped awkwardly causing them to roll ankle. The X-ray came back negative and the employee was diagnosed with a sprained ankle. A follow up appointment on 2/13 resulted in restrictions.
220260490018M12907The blast for the 445-3260 stope occurred at the end of day shift on 2/13 at 515pm. On the top cut of the stope on the 420 level, the back broke 10 ft above the 20 ft cables that were installed in the heading. The ground fell into the open stope. The fall was discovered on 2/14 at 12:45AM.
220260490020M11113Employee states lower back and shoulder discomfort from lifting spilled grinding media that weighed up to 24lb.
220260490021M11203Miner got a foot caught between a push plate and stop block resulting in a fractured first and second toe on  left foot.
220260500001M13658EE was experiencing trigger finger symptoms in November went to EE's Dr on 11/17/25. Was no disclosed by EE to company. On 1/26/26 EE notified HR and was evaluated by nurse on 1/27/26, then triage nurse on 1/27/26, then telehealth on 1/30/26. Seen by ortho specialist on 2/6/26 and diagnosed w/trigger finger & work related, received corticosteroid injection & RTW.
220260500003M11864EE was holding temporary metal plate while another EE was using a 4 inch grinder with cutoff wheel to remove tack welds. The grinder kicked out and cut injured EE's finger (right pinky).
220260500004M13197On 2/13/2026 at 7:50 a.m., Inspector slipped while climbing the ladder to a Volvo A45G haul truck near the wash plant. Losing three points of contact contributed to the loss of traction. EE caught self but twisted EE's neck and shoulders. Injury was diagnosed as a sprain/strain with no fractures reported as of 2/18/26
220260500008M10451Miner had a recordable shift in EE's hearing.
220260500009M10441Miner had a recordable shift in EE's hearing
220260500013M12075Pulling Poly Deck panels out using pin extractor tool. While hammering tool into place the tool popped out from poly deck panels. Struck employee in the mouth causing their lip to bleed and chipping a tooth.
220260500015M12015Employee was returning to work from break and attempted to enter the operators seat for packaging from the wrong side.  Their foot slipped off the foot rest and they cut their right leg above the knee.
220260500016M12135Employee was mounting a CAT262D skid loader.  There was damage to the foot hold causing a gap.  The employee's foot went through the gap as they were twisting to sit in the seat causing a sprain to the left ankle.
220260500018M12305Employee was engaged in moving steel beams in the pre-heater tower for the installation of headache decks to facilitate vessel entry. During this task, the employee experienced lower back pain after bending over to pick up a beam.
220260510001M12075While attempting to make a left turn in the company LV335 flatbed truck, it was hit by a personal vehicle on the driver side door. The impact caused the employee to hit their head on the driver side window. 
220260510003M11333Employee Strained EE's back operating loader.  Employee didn't want to go to doctor but pain got worse and decided to go on 02/18/26.
220260510004M13618The employee reported feeling unwell while operating a front-end loader. EE was transported to urgent care and subsequently referred to the local emergency department, where EE was evaluated and released without a definitive diagnosis. Additional medical testing is ongoing. At this time, the incident is not related to any work activity or workplace condition.
220260510007M12756Employee was using a shovel to clear fines. The employee was found unresponsive, sitting with back against a wheel of the crusher. There were no physical signs of possible causes nor were there any witnesses. Employee is still being evaluated and tested for medical concerns.
220260510008M10983EE was stepping down the steps of a shuttle bus and missed a step resulting in an ankle fracture. 
220260510009M13758 On 2-2-26 While EE was exiting personal vehicle, EE slipped and fell on patch of ice and EE was evaluated at onsite clinic and returned to normal shift with no restrictions.  On 2-12-26 EE reported pain in lower back, EE was referred to an offsite clinic.  EE was diagnosed with a fracture in L1 vertebra.  EE has been given no restrictions and has no lost time to report.  
220260510012M10632EE opened a clay bailey and material came out and got into eye.
220260510013M12015As employee was exiting the wash plant they jumped over a drainage ditch and felt a pop in their left knee. On February 16th employee was diagnosed with an ACL tear and is currently on restricted duty.
220260510014M11323EE fell 10ft 10in while leaning out a 11-1/2 in opening between a screen and adjacent handrail trying to look at the screen springs.
220260510015M10912Miner demonstrated a standard threshold shift during hearing testing conducted on 2/5/2026.
220260540002M11794Employee was attempting to rotate a conveyor tail pulley with a bar; the bar slipped from pulley causing employee to lunge forward hitting EE's chin on the side of conveyor frame.
220260540011M13047Employee was helping with maintenance on the Norberg cone crusher. EE went to climb down the step ladder, the ladder shifted while still holding onto the cone with EE's left hand. Employee felt a pop in EE's shoulder.  Employee had surgery on 02/19/2026 and was given restrictions making this reportable.
220260540012M13849Employee was holding a bearing still while another employee was hammering a chisel to remove race from the housing. During one of the hammer strikes to the chisel something broke off and the object went through sweatshirt of the employee holding the bearing and into EE's left forearm. Employee was taken to clinic where a piece of metal was removed; employee required three stitches.
220260540013M12917Employee pinched/smashed two finger tips on EE's right hand when caught between two steel shim plates while in the process of adjusting a Jaw Crusher. The pinching incident resulted in lacerations and contusions to the middle and ring finger on the right hand needing First Aid and stitches.
220260540016M12235Two miners were moving a portable crusher with a remote control. The track on the crusher contacted a rock, ejecting it and forcefully hitting two miners. The miners were taken to the hospital to have the rocks removed.    
220260540017M12305Two miners were moving a portable crusher with a remote control. The track on the crusher contacted a rock, ejecting it and causing it to forcefully hit two miners. The miners were taken to the hospital to have the rocks removed. 
220260540018M11664Employee was using a pry bar to clear a plugged chute.  When the rock broke free, the employee hit their hand on the side of the chute, sustaining a fractured finger.
220260540020M13097Employee operating a dozer when it came down dig face backwards, resting on cab. Employee released seatbelt and fell against cab, causing discomfort in shoulder. Taken to ER, released to next shift; before RTW, saw PCP, taken off work until seen by surgeon from prior back/neck surgery to be cleared. ONGOING.
220260540022M12997Employees were changing out crowd brakes on P&H Shovel. Employees states when last bolt removed, shovel shifted and knocked them into ladder. Employee left work without reporting incident. 02/13/26 employee notified Supervisor they were at ER, with neck injury and taken off work. Currently ONGOING.
220260540025M12576At 7:05am it was discovered that the wildfire originating off-property had spread onto the west and north boundary lines of the property. The fire did not result in any property damage or injuries to employees. Facility was able to reopen the following day.
220260540027M13167EE who had pre-existing chronic back pain upon hiring at the mine, and regularly sees a chiropractor, experienced discomfort while lowering an object during a shift. The employee went to personal chiropractor for an adjustment and returned to normal duties without any restrictions or time away on a subsequent shift
220260540030M12987A miner was pulling on a screen in a screener with a metal hook to get the screen over the tension bar, when the hook slipped from the screen. The miner fell backwards and landed on their right elbow causing pain. The miner was seen at an Occupational Health Clinic and received job restrictions.  
220260540035M12345Employee was opening a box at the receiving desk with a utility knife. The knife slipped and they cut the top of their right thumb. Employee was taken to the emergency room where they received three stitches on the top of their thumb.
220260540036M11945A mechanic was entering the cab of 9107 drill from the mast side. At which time the door slammed shut for unknown reasons, pinching the mechanic's pinky finger between the door jam and the door.
220260540037M12095EE was loading 18" culverts onto a trailer when one became unstable.  EE tried to stop and reload it back onto the trailer.  EE felt a pop on the inside of right elbow. EE suffered a torn distal biceps tendon.
220260540038M11494Maintenance Employee got their right index finger caught between a roller they were attempting to put in position and the drive gear for the roller. 
220260540039M12766While hosing media into the ditch, the mechanic noticed some plastic that was under the media, covering a portion of the grating. They bent over to pick it up and when they straightened up, lifting the plastic, they felt a shooting pain up right thigh and into the lower back.
220260540040M10682The operator stepped down off a minor platform and twisted an ankle.
220260540041M10892Had some water from melting snow that had leaked on this inside and employee had slipped.
220260550001M10922EE went to get out of the service truck to put fuel in, stepped on a rock, and rolled ankle.
220260550003M11183Department of Agriculture inspector had Left Pinky Finger stuck between weights cart and weight that led to 7 stitches
220260550004M11333A maintenance millwright was walking down the stairs in the raw mill from the 1 1/2 floor and fell down the stairs hurting EE's knee.
220260550005M11714The miner was performing regular maintenance, including welding, cutting, grinding, and torching. Sometime during this process, they got a piece of debris in their eye.   
220260550006M13828a newly hired laborer for the Dayton pit went to the pit supervisor and informed them that EE had hurt EEs wrist shoveling from the previous day.  The employee said that EE was using a shovel to clean off a concrete pad that had build-up on it and the shovel lip caught crack in the concrete, which caused the shovel to stop moving abruptly, which is when EE said the pain occurred.
220260550007M10752The miner was performing routine maintenance when debris entered their eye.
220260550008M11804Employee identified with a confirmed work-related Standard Threshold Shift (STS) based on audiometric testing. The shift met MSHA recordable criteria for occupational hearing loss.
220260550009M11624Miner was filling bulk diesel tank on service truck, miner completed task and stepped down from back of truck. Miner rolled left ankle, suffered a sprained ankle.
220260550011M13017A contract mechanic was driving a pin with a sledgehammer on the tracks of an excavator when a piece of the pin broke off and embedded in their thigh. Mechanic was taken to the emergency department where they received stitches for the injury. They missed one workday and returned the following Monday.
220260560001M10932Employee slipped on snowpack, fell from same level fracturing EE's right pinky when EE landed
220260560004M13718Around 1230 am employee said that EE was grabbing the fuel hose at Vista Fuel Island, tripped over the sign, and fell to the ground. While falling to the ground, the employee heard a pop in EE's knee. EE didn't report it right away because EE felt fine. A couple of minutes later, EE felt a sharp pain. The employee was assessed by a MERT member and then taken to the ER.
220260560014M11373During a winter storm, a tree fell onto the power lines coming into the mine. This caused a power outage which made the hoist inoperable.
220260560017M13087at 1350hrs an air blast occurred in the 46-146 old workings with the blast of the 46-136 heading. The air blast resulted in a ground fall beyond the anchorage points of the bolts. The ground fall occurred in an old working that was barricaded at the time of the event. No miners were in the area at the time.
220260560018M11363An employee was traveling in a van when the driver encountered a pothole on the haul road, resulting in a sudden jolt to the passengers.
220260560019M11363An employee was traveling in a van when the driver encountered a pothole on the haul road, resulting in a sudden jolt to the passengers.
220260560020M11363An employee was traveling in a van when the driver encountered a pothole on the haul road, resulting in a sudden jolt to the passengers.
220260560021M13257Employee was operating a haul truck that became stuck in mud. To recover the vehicle, a chain was connected to a dozer. The chain broke under load and struck the operator through the windshield. The incident resulted in medical treatment for facial and head injuries. Damage to equipment was limited to the broken windshield.
220260560022M12696Employee was following wires in the engine compartment for a light that was not working on a piece of equipment when their fingers contacted the fan blade of the engine cutting 2 fingers. They received 7 stiches in one finger and was put on restricted duty for 10 days.
220260570001M11033Employee was working in a dusty area and also working in an area that there was welding being performed
220260570002M11824Employees were working on replacing a bearing on the shaker. As they were removing the counterweight with a chain hoist, the bearing slipped off and smashed their right pinky finger.
220260570004M11133Employee slipped and fell while stepping over hose. Employee received restrictions for this injury on 02/16/2026.
220260570005M13648On 1/5/2025 employee was lifting a lock ring for a haul truck and reported hearing a pop in EE's left arm. Employee received an evaluation on 11/5/25 at BMGH and 11/6/25 at HGH and a full release to work both times. On 2/19/26 employee reported that EE's left arm was hurting and an appointment was made for 2/23/26 with a specialist and placed on restricted duty.
220260570006M11113In surge tunnel adjusting and replacing chains that help regulated the flow of stone from the surge pile above.
220260570010M12706An employee was using a 3" high pressure water hose to fill an equipment pressure washer and the employee lost control of the water hose and it slapped the employee in the left shoulder and chest, causing a strain to the upper left arm tendon, shoulder muscle and chest.
220260570012M13408EE was walking on grating on the 5th floor at the washer to retrieve a shovel while cleaning out 4/5 mudball chute. As employee was walking, EE stepped on some rocks and rolled their right ankle. EE was not carrying anything at the time.  EE received prescriptions, was placed on restricted duty, and prescribed physical therapy on 2/24/26.
220260570013M13648A contracted carrier loaded with cement was traveling on the plant road. The driver was speeding and ran off the road causing the truck and trailer to tip onto its side. The driver sustained a laceration to the head and was transported to a local hospital where stitches were required and a cracked vertebrae was discovered. Driver was also not wearing a seatbelt.
220260570014M11824Employee struck driver's side door of company vehicle with personal vehicle. Front air bag deployed. Employee has reported neck pain on 2/24/26. Examined at Health clinic on 2/25/26.
220260580002M10722Cement dust in eyes while troubleshooting a finish mill grinding circuit
220260580005M12275Employee was moving a box of bolts at the start of EE's shift in the maintenance shop. Box weight approx. 40lbs. Employee was moving from floor to shelf approx. 31" from the floor. Employee felt sharp pain lower left back area.
220260580006M10672Utility power outage caused the production hoist to be unavailable.
220260580008M13448Employee was helping with a repair of a broken gearbox. A sledgehammer was brought up to strike the gearbox to facilitate its removal. During this process the hammer head stuck a cap extension on the gearbox. A piece of metal was ejected and struck the employee in the mouth cutting their upper lip and breaking/chipping 2 of their front teeth.
220260580009M10802Employee was welding when a piece of slag got into their eye causing irritation.
220260580011M10902The employee was changing the jaw cylinder when a bolt fell landing on their pinky finger.
220260580012M11614A 600 psi air hose on the drill ruptured causing the window to shatter. The operator suffered a laceration on the top of their head requiring 3 staples to close.
220260580013M10922Employee was operating a loader when they alleged they hit a pothole that jarred their back.
220260610001M11734Employee conducting routine checks on preheater tower received burns to right cheek, neck, forearm and stomach.  This was a result of hot dust blowing from port to employee.
220260610003M11413employee was repairing a shaft. While tightening the shaft, the employee's hand slipped out of the wrench, and the employee hit EE's left eye
220260610004M12776While manually handling a wear plate during maintenance activities, coworker experienced pain in the left groin area. EE reported the incident and was evaluated by a medical provider. Medical evaluation indicated a possible hernia and follow-up with a specialist was scheduled.
220260610005M12045Ee reports walking down stairs at flume D, slipped on last step, rolled EE's ankle. Seen at Golden Valley, diagnosed with a closed fracture distal fibula, released to modified duty which site is offering.
220260610006M12235Ee walking towards connex, tripped on a raised curb. On 2/23 EE requested to be seen by a doctor as EE was still having pain in EE's shoulder. Seen at Golden Health, diagnosed with a sprain, and released to restricted duty.
220260610007M12987Ee operating 4.5in disc grinder fitted w/cutoff wheel to remove fender from flatbed trailer. Tool unexpectedly kicked back and the rotating wheel contacted the ee's left hand, cutting through the leather work glove, and cutting the pinky finger. Seen at ER, wound sutured, ee released to full duty.
220260610011M10832Lug to electrical contactor failed causing the production hoist to be unavailable. 
220260610012M11754Hoist dynamic brakes faulted causing the production hoist to be unavailable. Cancelled before evacuation was completed. Also, cancelled before the phone call to report ended. 
220260610014M11884Walking out of the training office employee tripped and fell down the stairs. Employees boot caught the second step and fell onto their knee 2 steps down pinning their left leg underneath.
220260610016M13087While performing overhead torch work to cut bolts, the miner was struck by hot slag. The slag traveled between the face shield and safety glasses and contacted the eyelid. The miner was evaluated by an ophthalmologist, where a small foreign body was removed and the burn was treated with prescribed ointment.
220260610017M12576Operator was running an open cab stand on skid steer and was not paying attention to surroundings and hit their hard hat on a guard of a conveyor. The operator went to the emergency room and was cleared by doctor to return on 3/2/26 missing one day of work.
220260610018M13167EE was walking across the parking lot to the autoclave when they slipped on snow covered ice, falling and landing on right shoulder. Their shoulder continued to hurt, and on 2/25 they were diagnosed with a soft-tissue tear, making this reportable for treatment. The EE resigned and left NGM, their last day was 2/26.
220260610020M12596On 2-19-26, a teammate reported eye pain in BD 10. After using an eye wash, they requested a medical evaluation on 2-23-26 for persistent discomfort. While no debris was found, a corneal abrasion was diagnosed, and prescription drops were issued for recovery.
220260610021M11423Miner was walking down the stairs from a dry powder bagging machine platform and hyperextended right knee while stepping down causing pain.   
220260610022M10612Working on machine when their hand was caught in the machine.
220260610023M11454On February 20, 2026, at approximate 7:30 am our miner suffered a fall due to not wearing fall protection injuring an ankle, ribs, back and head,
220260610024M10381BILATERAL CARPAL TUNNEL LEFT AND RIGHT
220260610025M10942The area was and inactive area that fell at the intersection of the ore body and the host rock
220260610026M13849The area was the Ore access and the fall occurred at the intersection where material was bagged in the mesh.  Miners intentionally dug out the top, creating a ground fall.  When questioned as to why, they said they knew they were being laid off and it was somebody else's problem now.  This was not an unplanned ground fall, it was planned by the miners who intentionally dug out top.
220260610027M11584Using air lance to unchoke material in air slide.  Large amount of material plumbed out and got into Right eye.  Employee was wearing approved safety glasses.
220260620003M12516Employee was using a crane outfitted with a magnet lifting device attempting to lift a cutting edge from a dozer. When the magnet was attached, the employee stuck EE's face near the magnet and the handle released and hit EE in the nose causing injury.
220260620004M11033Employee twisted ankle when walking on ground while performing maintenance activities on an excavator. 
220260620005M10912Employee alleges that after a rock was pulled out, another rock rolled and injured finger. 
220260620006M10562Miner was cutting a belt using a box blade and cut self.
220260620007M11724Employee was shoveling material and felt a pain in EE's left shoulder. EE went in for an MRI and then on 2/25/26 EE was diagnosed with a shoulder impingement and issued PT.
220260620009M11293EE was stepping off the Haul Truck ladder onto uneven ground, when EE felt and heard a loud pop, and states EE felt instant pain.
220260620012M12806On 2/4/2026 an employee was using a spud bar to clean material from a clogged chute at the surface crusher when EE injured EE's right pinky finger. EE refused treatment at time of incident, but after seeing a doctor on 2/26 & 2/27 it was determined EE's finger had been fractured.
220260620013M12726Employee was cleaning under Belt 111 in Crushing. EE was bent or crouched over to access the area under the belt. When EE stood up, EE lost EE's balance and fell into a section of angle iron support, striking EE's head on the angle iron, causing a laceration on EE's head.
220260620015M11604Metal plate fell onto employees foot. Incident did not become reportable until 2/16/2026 when employee sought metal attention and was diagnosed with fractures. 
220260620017M11674Employee was hand mucking the south end plate in the 2 shaft when a rock rolled pinching left hand resulting in a tuft fracture and a laceration to left middle finger.
220260620018M11935Mechanic was adjusting a wiper blade when their shirt or tool caught on conveyor belt pulling their arm into head pulley causing a dislocated elbow and fracture on ulna and missing finger nail.
220260620020M12526EE was dropping bolts off at headings underground. A bolt slipped out of their hands back onto the truck, and the bottom of the bolt hit them in the face, cutting their cheek. Seen at ER, wound closed with sutures, and the EE was released to full duty.
220260620021M12456Air switch failure for concrete plant that has property on ours which was on a pole that was on mine property. Power was turned off to the plant and the fire department put the fire out. NO team members were near the pole when it caught on fire.
220260620022M13548Employee changed a bearing on an exhaust fan and was reinstalling the V-belts by hand when left pointer fingertip was caught between the V-belt and pulley sheave. The belt was rotated to free their finger. After removing their glove, a laceration was found. Employee was taken to the hospital, received four sutures, and returned to duty after treatment.
220260630004M10993Employee suffered laceration to left little finger performing screen change that required 1 suture.
220260630006M13518Miner was walking from SS to SCD, slipped and fell striking EE's head on the ground. The miner didn't lose consciousness and EE got up and went to SCD where EE reported the fall. Miner initially refused medical treatment then decided to go to the ER for evaluation. Physician removed miner from duty for 1 shift as part of a mild concussion treatment.
220260630007M11073Employee slipped and suffered soft tissue injury to shoulder, neck, back area. Muscle strain, pinched nerve
220260630008M11333EE said the scraper seat was loose all day and jostled EE as EE drove it during EE's entire shift.  EE complained of lower back pain.
220260630009M1072258yr. old female miner has been diagnosed with a degenerative condition.
220260630012M11444Employee dropped EE's hard hat on the ground, picked it up and started walking and hit forehead on walkway support beam. Laceration to forehead.
220260630015M12355Miner was using a handheld grinder on a weld when metal debris flew into left eye. Eye wash station was unsuccessful at remedying, so miner was taken to urgent care for treatment. Doctor successfully removed metal debris with tweezers.
220260630019M11003A fueler was reversing the fuel truck and contacted a rock causing pain in the neck and shoulders.  
220260630022M11724It was raining, ground wet, employee was walking into mud room at sand plant when they slipped in mud and polymer causing them to fall. States they have back and knee pain.
220260630023M13828Was Changing support rollers on 57101 Clinker Pan conveyor. Was using standard steel 3lb sledgehammer to drive the rollers into the bracket on the pan. The hammer glanced off the end of the roller and struck the heat-treated flange of the roller causing a shard of steel to break off and lodge in leg. The employee was taken to clinic and released back to work with no restrictions.
220260630024M12456The employee was performing maintenance using a wrench. Wrench slipped off a bolt, causing the employee to lose balance and fall backwards into a shelf then onto the ground. The employee tried to brace themselves with their left arm injuring it.
220260640001M13838The employee was changing a unplugged drill bit. EE was using EEs hands to loosen and tighten the drill bit in place. EE could not get a sufficient grip on the drill due to wearing gloves that had oil/grease on them as did the drill. EE removed EEs gloves to attempt to improve EEs grip. EEs hand slipped while tightening the drill and struck the tip of the bit causing a laceration.
220260640002M12436While performing mechanical maintenance inside of a controlled environment garage, the employee used a sledgehammer to dislodge a brace when the sledgehammer broke the weld the iron angel spun and struck the base of the employees right thumb. 
220260640003M10952Employee claimed that EE hurt EE's shoulder while digging in the muck pile with the pit loader.
220260640004M10692Walking Down Stairs and stepped on a 3in rock rolling the left ankle.
220260640005M10441Injured left index finger between wear iron.
220260640006M12005Employee stepped out of a light vehicle and feet went out from underneath them landing on their backside. Employee was seen on 3/4/26 due to pain and prescribed pain medication and given restrictions.
220260640007M12856A Mechanic was removing the propel shaft on a Shovel using a steel cable and a Dozer. While positioning the cable on the dozer's ripper, a mechanic placed a hand near the line. When the dozer moved forward, the cable shifted and caught their left hand between the cable and the ripper.
220260650001M11985Miner was conducting a mill return to service checklist, when EE stepped on a piece of clinker and felt pain in EE's right foot. Miner was prescribed a walking orthopedic device and restricted duty.
220260650002M10321Full propane tank for a forklift
220260650005M13478An employee was removing a lever hoist used to align a shaft during a bearing replacement. During the lever hoist removal, an employee's nose was lacerated when struck by the lever hoist. The initial X-ray results were negative for any fractures or broken bones. A fracture in the nose bone was revealed during a follow-up CT/MRI scan on 3/3/2026.
220260650007M11233Contractor operating a telehandler near the dry plant load-out struck a contract employee in the lower back with the forks.
220260650008M10902Left Hand slipped and hit the side at the screen box causing lacerations, with 3 stitches.
220260650010M11764While the operator was operating the dozer they were backing up. They placed a hand on the arm rest when they went over a rock the arm rest failed causing a finger to dislocate
220260650012M11474Mill Diagnostic Mechanic missed a step on the floor grating. They stumbled and attempted to regain balance but fell forward, landing on right knee.
220260650013M12556The employee had noticed red on the under part of their eyes 2/18/2026 at the end of their shift and over the next couple of days a rash appeared and on 3/4/2026 the employee reported the injury when coming back to work due to the condition not improving.
220260650014M10572Employee was walking up ramp to check pump twisted ankle.
220260680001M13007Maintenance replacing the trunnion/bearing rollers on the rotary screen. While attempting to remove the strap holding the roller/bearing, the weight shifted and caused the roller and bearing to shift and struck the Techs right hand causing a laceration to EE's (R) index finger, requiring 7 stitches.
220260680003M11854Employee experienced eye irritation from an unknown particle and attempted to flush their eye; later in the shift the irritation persisted and the employee was seen for an eye abrasion.
220260680005M11644Employee was utilizing a 12# sledgehammer to tighten a hammer union seal.  Employee struck seal 2-3 times and then experienced pain in EE's right forearm and bicep.
220260680006M12095While poking a silo the employee struck the top of EE's left hand on the spout piece, resulting in discomfort. As EE was walking down the steps, EE hit the top of left hand as well, causing further discomfort.
220260680007M11914Employee pinched their right pinky finger between the forklift mast and the tip dumpster while assisting another employee in latching the tip dumpster. A fracture was diagnosed on 02/24/2026.
220260680008M12927While installing the lower chisel head on a splitter using a prybar to locate the lower head bolt into place the bar slipped and the head shifted smashing the employees left index finger requiring 6 stitches. Employee is on limited duty with left hand until stiches are removed on 3/16/2026. 
220260680009M11193employee was unspooling cable on the dredge winch line when the cable EE was pulling had a burr and cut EE's left hand.
220260680010M13849During the removal of a sheave from a pump assembly, using a block of wood as a protective buffer while applying force with a sledgehammer. EE A was holding the block of wood against the sheave while EE B struck the block with the sledgehammer. During one of the swings, EE A attempted to reposition the block of wood, & the finger was pinched/smashed between the wood and the sheave.
220260680011M11193While mounting drill, employee alleges they lost footing, slipping but catching themselves and felt pain in their back.
220260680012M13508The employee was removing a pump when the securing chain slipped and made contact with their hard hat. The employee reported no injury and continued working. As a precaution, they later sought medical evaluation. No treatment or medication was required or prescribed. The employee subsequently took scheduled days off during a planned production gap.
220260680017M12486While operating a loader underground EE stated they hurt their lower back due to the uneven ground in the area where they were loading material. The EE was taken to the clinic where they were diagnosed with a lumbosacral strain in their lower back.
220260680018M12826On 3/6/2026 3:20 a.m. management was made aware power had been lost to the slope hoist. This being the secondary escapeway, all mine personnel were evacuated using the primary escapeway. MSHA was notified when power restored at 4:02 a.m. No miners were injured due to this incident.
220260680020M11373Walking down a step of steps and rolled ankle on a pile of rocks at the bottom of the steps.  Placed on restrictions by Dr on 03/02/2026.
220260680022M11193Employee was exiting the scale house office and slipped on ice and fell on steps and fractured four ribs in their back.
220260690003M13508February 27, 2026, an employee and a coworker were cleaning tracks on excavator. While holding the hose of a sprayer as the coworker operated the sprayer, the employee slipped from the track surface and fell from the equipment. During the fall, the employee's right leg became caught between the excavator tracks, and the employee fell to the ground.
220260690005M13698Winter blizzard and changing weather conditions created slippery surfaces. Ice developed on top platform dust collector and created a slippery surface. After performing maintenance task to thaw frozen air lines, employee sustained a left ankle injury after ascending ladder and stepping on the top platform for accessing the dust collector resulting in restricted duty.
220260690007M12105When employee was attempting to drive wedges out of rotor on the max cap, EE pinched EE's left pinky finger with the sledge hammer handle when swinging.  this caused small fracture at last bone in pinky finger.
220260690008M10532Squatting to retrieve a rope and caused a back spasm.
220260690010M13598An employee experienced an incident while using a ratchet that became increasingly difficult to turn. During this process, the employee felt a pop in their right bicep. Following the incident, the employee was evaluated and was returned to work within their job class. However, the employee is now scheduled for surgical repair, which triggered reportability.
220260690011M12335Elevator got stuck with EE inside at 5:41. Service contractor notified. MSHA called at 6:21 ref. 04978221. Service contractor arrived at 7:05. Stuck EE out at 7:33. MSHA notified. Service contractor cleaned dirty ground floor switch.
220260690013M11574Miner was attempting to clear an airside that was plugged, when material blew back into their face causing an abrasion to the cornea. No foreign body in eye.
220260690016M12295Employee was called to assist in cleanup of a floc spill; Employee was using a shovel to clear the floc, slipped and fell, hit the right side of their face on the concrete, causing a laceration in right eyebrow, required sutures.
220260690018M12325Employee was stepping off of chain conveyor belt after cleaning photo eyes, and twisted ankle.  Conveyor was locked out and not moving at time of incident.  Employee maintained three points of contact and did not fall to the ground.
220260700003M11694Employee went to climb onto the scalper conveyor and their foot slipped off the conveyor frame and caused them to hit the right side of their ribs on the conveyor frame.
220260700009M13778The HVAC vent covers in the floor of the office building/ lab were removed for floor cleaning and waxing. Mill operator was exiting the lab area when EE stepped on said opening, making EE loose EE's balance, leading to a fall. Employee was transported to hospital via local ambulance service. Employee was seen by hospital ED for pain in knee. Xray's indicated no broken bones.
220260700011M11975Emp was holding chisel while trying to loosen bolts on blow bar locking rounds on crusher rotor and striking it with a sledgehammer.  The hammer ricocheted off the chisel and struck emp left thumb.
220260700014M13107The employee was working at the base of the crusher ladder and placed their left hand on the frame and started turning the pin with their right hand to collapse the ladder. The employee failed to notice that their hand was placed in a pinch point area and when the ladder folded in, it crushed their left hand.
220260700015M11744Employee was staging liners, when they accidentally pinched the tip of their finger when setting one down. The nail was broken in half and bleeding, Causing a finger fracture
220260700018M10862Rock rolled and smashed their right hand/fingers. split open finger and little finger.
220260710001M12125The employee was walking down the stairs at 1st bank silos when EE slipped on a piece of clinker causing EE to land EE's right foot awkwardly on the next step. On 03/05/2026 EE was issued light duty restrictions.
220260710003M11403EE was trying to undo a flange on FM03 sample station. As the flange broke free EE's hand slipped and EE's index and middle finger were cut.
220260710005M13538Injured & EE's partner were removing pan skirts. The injured was installing a swivel eye lifting device while EE's partner partially lifted the liner with a lining bar so EE could install the 3/4" nut underneath. The liner slid down the lining bar, pinching the injured's right middle and pointer fingers between the liner/nut and the pan feeder flights
220260710007M10932Employee was changing a part in the Vertical Shalt Conductor and the door shut on EE's finger
220260710009M10802Weather: sunny, haul road ground conditions with medium-sized rock in the road. 
220260710012M11704Driller was walking on the pattern and rolled EE's ankle as EE stepped on a frozen chunk of dirt.  Operator fell to the ground got up and stated EE had rolled EE's ankle.
220260710013M11874Several utility workers were loading mill rods into the raw mill. As they were unloading a rod from the forklift forks, their finger was caught in between the hand rail and bottom of rod.
220260710015M13678On 3/10/2026 6:30 p.m. management was made aware that the surface trash compactor storage container had material inside on fire. This metal container measures eight feet by 22 feet and is used to transport trash from the mine property to an offsite dump. MSHA was notified and the fire was extinguished. There was no damage to property or injury due to this incident.
220260710016M10892Employee was walking and their foot slipped out in-front of them and sprained their back.
220260710017M11854Employee had just scaled the top went to step forward to bar down another piece, and a small thin piece of trona fell striking and cutting their upper lip. Employee received 5 stitches.
220260710018M12746Employee was loading a piece of drill steel into the back of a truck and the steel slipped and smashed their middle finger between the steel and the truck bed.  The finger was smashed pretty bad.  The employee drove themselves to the hospital and got x-rays and 12 stitches.
220260710019M12195The employee had several knee replacement surgeries in the past that may have contributed to the weakening of their leg. Employee was walking backwards pulling a water hose when their leg gave out and their femur broke.
220260710020M11734Persistent Standard Threshold Shift identified during annual audiometric testing. Noise dosimetry data consistent with exposure below action and permissible exposure limits.
220260710025M12125The employee was using a hammer to remove the ground engagement tool (tooth) on the loader bucket.  When striking the GET, a chip from the hammer face broke off and entered the top of the employee's left forearm.
220260720001M11013EE was starting an air compressor and hurt EE's wrist when pulling the pull cord to start compressor.
220260720004M12466An employee was attempting to place a plate in the pioneer shaker table when EE received a laceration to EE's right hand. EE was utilizing a sledgehammer when the hammer slipped and caused EE's right knuckle to abrade on the pioneer shaker plate.
220260720005M11464While attempting to dismount Pit Loader 07-0014 (992K) from the rear access ladder, EE twisted EE's right knee as EE made contact with the ground.
220260720006M12085Employee was coming down off a service truck, slipped on the top step, and fell 3 feet landing on EE's back, causing a mid and upper back contusion, left 5th anterior rib fracture and left small pneumothorax.
220260720007M13307A seismic event occurred shortly after the blasted round in 37-281 stope. No one was in the area at the time of the event. The area was shut down to work and or travel until the next morning, when we could get into the area to investigate. upon inspection of the area, a section of cemented sand had taken damage during the event.
220260720009M12766EEs were in the process of removing old belting.  Roughly 30lbs of belting per piece.  EE lifted the old belting up with assistance from another EE onto a cart to take out of tunnel.  When they bent over to pick up another piece they felt a sharp pain across their lower back.
220260720010M12315A piece of longwall equipment was loaded on the cage that exceeded the weight compacity by 500lbs and while it was being hoisted out of the mine the motor faulted out causing the breaks to set while in motion and the ropes slipped.
220260720013M11383EE was operating loader when the left front tire slipped off a slab approx. 8-12" and jolted operator in their seat causing a back strain.
220260750002M11945Operator used air pressure to clean a line and opened valve before bleeding pressure. Air pressure burst a catch trap and oxalic acid with debris hit operator's face knocking safety glasses off.
220260750003M10993While lifting a cooler off the tailgate of truck, the employee stepped back and strained EE's knee.
220260750004M12766originally Diagnosed with a non reportable strain to EE's left knee, sustained while connecting a hose to a tanker truck.  On follow up with Orthopedic Dr. 02/12/26 EE was scheduled for MRI and PT. Case elevated when EE started medical treatment (physical therapy) 03/09/2026.
220260750010M11654EE was turning on stairs landing to go up the stairs on Pellet Plant line 1 carriage up towards balling drum.  EE felt pain in the right knee. No slip-fall occurred.
220260750012M12536IW was dismounting the adjustment ring with EE's right hand on the top locking post when the feed cone swung and pinched EE's right middle finger between the locking post and feed cone, resulting in a fracture and laceration to EE's right middle finger.
220260750013M10983EE was lifting a piece of stone onto a thin stone conveyor when another piece fell on EE's finger.
220260750014M11664While a miner was putting away a snowblower, they slipped on the ice and fell. They were taken to be evaluated by medical professionals and given time away from work.
220260750016M13147According to the EE, EE "just turned and knee gave out". EE stated that this was a "preexisting injury that EE thought was healed". EE finished EE's shift and did not seek medical attention until 3/12/2026. EE was later caught walking through the location while on EE's cell phone and EE was walking without issue.
220260750017M13438EE was attempting to lift handrail which had been tack welded to the floor. When they lifted the item with the crane, the steel floor lifted with it, they stepped forward to check why the handrail was not lifting and their right foot ended up underneath the floor plate as the weld failed and the plate fell onto their foot causing a fracture.
220260750019M13768Crew was spooling in the dredge anchor cable using the winch. The cable started to become off track of the spool when the employee placed their right foot into the cable to prevent it coming off the spool completely. The employee reports their foot slipping off the cable driving their heel into the decking/floor of the dredge causing immediate discomfort to the right ankle.
220260750020M12205Employee was unloading a 3" stone cap from the guillotine. Employee was pulling the stone towards them when the stone came off the metal roller wheels, the stone fell and crushed a hand between stone and the metal table.
220260750021M12195An operator was using a rock hook to unplug a chute. They were pulling up on a stuck rock when it broke loose which caused the tool to come up and make contact with the employee's central incisor #8 (front upper) tooth.
220260750022M10932IP woke up, stepping out of bed experienced pain in right leg, mainly on right knee and foot.
220260750028M10231Damage to #3 Headframe.
220260750031M11123ee was moving the OSM drill, but it was frozen in the ice, so they tried barring it over and wrenched their back
220260760001M12466While prying the bearing loose, EE's right pinky finger was caught between the prybar shaft and the metal edge of the "top-head" on the right. EE's pinky was smashed causing a laceration. EE was taking to the emergency room and received stitches.
220260760005M11694EE reached out with EE's left arm to lift up a rolled up hose hanging on a hook at 6' 4" and felt a pop in EE's elbow. When EE sat the hose down EE's elbow popped again.
220260760006M10682Employee slipped and fell in an icy area and injured their shoulder.
220260760008M12586Employee had finished up using a grinder, too EE's face shield and welding coat off when they felt something in the eye. EE was seen by the local clinic, it was a small piece of metal that was removed with a cotton swab and they gave EE antibiotic eye drops.
220260760012M13007Employee removed lid from manhole to pump out water from scales. While waiting on water removal process to be completed, EE picked up an air hose and began walking backwards to remove slack from the hose and stepped into the manhole causing employee to partially fall into opening striking lower back
220260760013M11343employee was replacing and old disconnect box. EE got cut by the edge of the box on EE's arm. EE went to get a tetanus shot for safety
220260760016M11353During a winter storm, we lost power to the site causing us to lose hoisting capabilities. Seven employees were downshaft at the time. 
220260760019M12556After using plasma cutter, maintenance personnel lifted their face shield dislodging metal dust onto their face. Some of the dust went behind their safety glasses and into their left eye. Metal debris was removed from eye and antibiotic drops prescribed. 
220260760020M11904Pump Checker was hooking up the 8" x 20' pipe to the pump; they had to drag the hose about an inch to get it lined up with the connection when they felt something pull in left lower abdomen.
220260760021M11714EE was sprayed by another EE with water from a water cannon. Seen at clinic, diagnosed with a contusion and on follow-up referred to PT and MRI. Released to modified duty.
220260760022M13798EE was cutting sheath off wiring, the blade slipped and caught left middle finger. EE and another employee rendered first aid, clean and wrapped the cut. The cut did not require additional medical as it appeared to be healing fine. The Evening of 3-4-26 the finger swelled up and they went to the ER where It was determined it was infected and medical intervention was necessary.
220260760023M12135The miner was moving a new wire reel to power the hoist. Miner was using a socket to remove a bolt when the socket slipped and hit the miner in the mouth. The bottom of the miner's two front teeth was chipped off.
220260760024M12736EE was connecting a nip, lost footing, twisted and dislocated their patella. Seen at the ER and released to light duty. EE referred for surgical consult and on 3/11, NGM received confirmation from the surgeon that a tear in the knee was caused by the work-related incident.
220260760025M11925Haul Truck 629 was loaded at a shovel and traveling uphill to a dump when smoke and flames were observed in the engine bay. The haul truck came to a stop the operator descended the haul truck.
220260760026M11704A pipe was rigged up to be placed when the weight shifted and the subject's hand was smashed between the pipe and a pump.  The subject suffered a broken left ring finger.
220260760027M12075While using a punch to dislodge a backstop bushing from a conveyor gear reducer, subject struck a finger with the hammer. Subject did not think it was bad until they noticed the bone was moving the next day.
220260760028M11363Surveyor was marking lines on shot muck when a rock rolled onto their arm. Then rock forced their hand into another rock causing injury.
220260770002M10752Employee stepped off of water truck and rolled right ankle causing injury. 
220260770003M12686The east brake on the Production Hoist was recirculating all oil to the tank.  Valve V 10 was not closing.  Replaced the valve and found a lot of rubber shavings in port holes leading into the valve.  Flushed out port holes and installed valve. Everything tested good.
220260770005M13828Emp. was standing on the track hoe tracks filling with DEF.  When EE finished, EE turned to the left and EE's left foot slipped off the tracks and EE fell landing on the fuel trailer that was parked beside the track hoe. EE suffered 4 fractured ribs and nicked EE's lung on left side. The area received a heavy rain the night before, the area, the tracks, and EE's boots were muddy.
220260770009M13067Employee stepped off onto the platform on the 826 miner to descend using the access steps & stairway. The bottom steps were in the raised position and moved downward when weight was applied, stopping abruptly. The sudden movement caused the employee to experience pain in the lower back and umbilical area.
220260770011M11313EE was working in the welding stall clean of debris around 48 degrees. EE was working on hydraulic when EE smashed EE's right hand.
220260770012M11173Employee was removing plastic wrapping from a pallet of bentonite bags using a utility knife and cut EE's left thumb.
220260770015M12887Employee was ascending stairs when they felt a pop in left knee causing pain and discomfort. Initial icing and stretching helped the pain and discomfort. Later the pain and discomfort returned. On 3/17/26 employee was enrolled into Physical Therapy resulting in event becoming recordable.
220260770016M11153The EE was doing clean up when a clay ball rolled off the feeder and rolled down the berm and hit their left wrist.
220260770017M12155A miner was standing on a 3"x8"x12' board, mining ore. The board broke under the miner's weight, and the miner rolled their ankle. The ankle sustained a displacement fracture at the bottom of the tibia at the ankle.
220260770018M11514The Shovel Operator walked the shovel back down off of the 3'-4' hard knob and the shovel jolted. This resulted in the operator experiencing neck pain.
220260770019M11283Miner was using a metal bar to chip away some material buildup and on the up stroke of their swing, struck them in the forehead.
220260770021M11945Mill Crusher Ops employee was making their rounds this morning checking all the unit screens at the Secondary Crusher, employee went to close the "doghouse" door and smashed their middle finger.
220260770022M12115Operator was mounting a Haul Truck and raising the boarding ladder. The operator's hand was on the boarding ladder switch when the handrail to the ladder pinched their finger between the switch and the handrail.
220260770023M12866Morenci Mill Maintenance employee was in the belt shop attempting to cut some skirting for a belt job. As they began to cut using the Olfa knife, the knife slipped cutting into the A6 rated glove and HexArmor sleeve into the employees left thumb, side cutting the skin next to the nail.
220260770024M12456A Morcon ops employee was washing off material behind the ball mills area when they took a break.  Upon returning from the break they went to bend over to pick up the water hose to continue spraying down area when they felt a pain in their back.
220260780002M13147While performing maintenance, an employee was manually removing a section of metal floor grating. The grating shifted unexpectedly, catching and pinching the employee's right middle finger between the grating and the support frame. This resulted in a laceration to the fingertip which required sutures for closure.
220260780003M12686The employee was attempting to trouble shoot an issue on the 3/4-inch stacker inside the MCC. The employee opened the bucket of the MCC and did not turn off the power to the bucket, while attempting to remove a fuse an arc flash occurred injuring the employees' hands.
220260780010M10492IW pulled a tool tray out and strained EE's back.
220260780011M11013While installing a radiator the employee caught EE's finger between the radiator and hydraulic cooler
220260780012M13097Employee was holding a wedge used to remove a stuck sheave pulley on a motor shaft. Another employee was striking the wedge with a 4lb. hammer and the hammer missed the wedge and struck holding employee in top of left hand. Employees were wearing full PPE, but hammer strike resulted in fracture of left hand.
220260780015M10652Employee was moving rock forward on rollers and smashed a finger.
220260780016M10682Pulled a muscle while walking and bending over on the blast pattern.
220260780017M12345Employee was adjusting forks on forklift to lift a skiff. They used a sledgehammer to help move the fork closer together. When they struck the fork, the fork slid and pinched the tip of right thumb in a pinch point. Received stitches.
220260780018M10832Employee was moving HP4 Chute when Chute smashed finger between chute and hand rail
220260780019M12105Employee was closing out for the day. After parking equipment, employee was walking around it. Employee was stepping over the bucket and their leg twisted. They fell and their knee hit the corner of the bucket.
220260780020M11504While changing screens on the screen deck, the employee lifted the screen to move it into position. While doing so, they felt a pop in their left arm.
220260780023M10993Miner sustained a shoulder injury while using a sledgehammer to hit a pipe to clear a plugged line.
220260780024M11734The employee was placing a ladder against a chute, when dirt/debris fell onto employee's face and into EE's right eye. The employee rubbed EE's right eye causing irritation.
220260780026M11995Miner was refueling a haul truck, using a ladder to access the fuel receptacle.  While descending the ladder, the minor lost footing and missed a rung and landed on the right ankle causing a sprain. 
220260790006M13498Employee was operating skid steer on bench, backed up next to berm, highwall under the berm sloughed off causing the skid steer and operator to fall backwards off highwall. Skid steer landed on roof, operator was able to self rescue. Operator stated that EE had pain in EE's back and was taken to the local hospital for evaluation/medical treatment.
220260790007M11634Employee was climbing down ladder on a loader. When employee moved rt hand a gust of strong wind caused employee to fall off ladder. Causing pain to the right knee
220260790008M12035Employee was cleaning out rail tracks with hand tool when EE started to experience pain in EE's back on Monday 3/9/2026. Reported pain to supervisor on 3/13/2026 and went to the local clinic on 3/13/2026
220260790009M10622Twisted knee while walking down the stairs in Genesis building
220260790010M12345Operator was operating a Komatsu WA 500, driving from the fuel island back to the area EE was working. EE hit a rutted area and the front end loader bounced, causing the operator to hit EE's head and jamb EE's thumb into the joystick.
220260790012M11684EE was helping a delivery driver offload material. During that process, EE lost EE's grip and a piece of steel fell onto EE's left upper thigh resulting in a contusion.
220260790013M11063Employee was changing the air filter in Semi truck. Slipped off truck and fell to ground hitting EE's head
220260790014M11614While cutting a piece of rubber flashing, the utility knife slipped. The knife entered EE's right hand beside the bottom knuckle closest to the palm of the hand.
220260790020M12355EE sustained a Standard Threshold Shift in hearing. Confirmed reportable noise induced hearing loss. Occupational exposures could not be ruled out. Confirmation received from Au.D. CPS/A, on 03/17/26. Retraining and refitting complete.
220260790027M12265EE reports stepping down off haul truck, tripping on rock, and falling to ground. Seen at health, diagnosed with a hamstring injury, released to restrictions. On follow-up before next scheduled shift, EE released to full duty.
220260790028M10642Hoist motor has a burning smell. Currently down for maintenance.
220260790030M11373The subcontractor's employee was removing solar panels from their frame when a the glass from a broken solar panel lacerated their wrist.
220260820001M11694Employee was filling a tire with air. EE went to release the ratchet strap and it fell off, striking EE's right wrist. EE suffered a laceration that required 3 stitches.
220260820003M11433Employee felt pain in their lower back and numbness in their hands after a shovel dropped a bucket of material into their production truck box.
220260820004M11574When the bit caught a piece of steel, the hand drill twisted in the employee's hand striking the employee in the face with the battery of the cordless drill.
220260820005M11874EE had clocked out and was in the contractor parking lot at EE's car. EE removed EE's boots and banged them together to shake off excess mud, dirt, and lime, which got into EE's left eye.
220260820008M12025The employee was entering the production utility shed outside of the administration building. When EE attempted to open the door the hinge failed and the door struck EE in the head causing a laceration.
220260820009M11985While cleaning brush up an employee contacted poison ivy. EE went home and had a mild reaction. Today EE's reaction was severe enough to go to see a doctor. EE had reaction on EE's face and stomach.
220260820010M13147Subject was changing the bags in a baghouse on 3/13 and 3/16 which involved a lot of bending and lifting. Subject had discomfort in EE's back and thought resting it would be fine, but still had pain days later. Subject reported it on 3/19/2026. Subject has been going to a chiropractor to help with the discomfort.
220260820011M12616The employee was welding a portable hopper in the warehouse and took off their welding helmet to grind. They put on their face shield but not their hard hat and after grinding, stood up, striking their head on the leg stand of the hopper cutting their forehead.
220260820012M13698The employee responded to a high-temperature alarm on the impactor crushers displayed on the HMI. As part of normal correction, the employee proceeded to the impactor building to activate the air horns for each impactor unit. The employee then proceeded to BIC2 and opened the air horn valve. A loose hose end became pressurized and struck the employee in the left eye.
220260820015M12816EE reports that they tripped over their own feet exiting the cage, caught self with left arm, straining shoulder. EE seen at health, diagnosed with a shoulder injury and referred to orthopedics which they had already scheduled. Orthopedic continued them off work pending follow-up.
220260820016M12967CONTRACTOR/CUSTOMER After loading their truck with stone at our site, C R Cozino Inc's employee was injured.  The driver was attempting to remove some stone & punctured their left hand when the tailgate latch fell on their hand that was positioned on the tailgate pin.  NOT A LUCK STONE EMPLOYEE.
220260820017M12786EE downloading data off monitor, disconnected monitor from computer, twisted left to grab next monitor, felt sharp pain in neck, then stretched their neck and heard popping. Seen at clinic, diagnosed with cervical strain, released with restrictions. Site offering modified duty.
220260820018M13267An employee had made multiple trips up and down tank stairs to swap tanks and began feeling ill.  They went to the Lab and laid their head on desk when another employee observed them and asked a manager to come over and assess. The manager assessed and took employee to ER for evaluation. Employee was treated for dehydration.
220260820019M10922The mine experienced a weather event that created a power outage which took the hoists down.
220260820020M12917The haul truck operator had completed dumping and was traveling back down the haul road. While driving, the operator struck a pothole at approximately 13 miles per hour. As a result of the impact, the operator reported experiencing lower back pain. Operator went restricted duty on 3/9/2026.
220260820021M11784During the process of replacing clips (brackets) in the Filter Press, EE was accessing the area behind the door to install on clips, when they suddenly twisted their right ankle.
220260820022M11975While walking to their work area employee tripped on conveyor belt and fell to the ground. Employee tried to catch themselves with their left arm to dampen the fall and felt pain in their shoulder.
220260820025M13808The IP was operating mucker at a working face when the mucker bucket made contact with the rib. This contact caused a jolt and lower back pain. The IP felt it unremarkable, completed shift, went to bed and woke up in pain before the next shift. The IP was seen at our onsite clinic.  After 3 days sick in quarters, the IP followed up at home with their Dr. Where employee remains.
220260820026M13808The IP completed fueling of the mucker. While returning the hose to the fuel cell the hose fell striking the IPs ring finger, causing a cut requiring one stitch to close, the IP went to the local hospital verifying no bone was broken, returning to work the next day. The IP was not at their normal job role after the incident for  1 1/2 shifts verifying the finger was not broken.
220260890001M13117Operator on lunch saw EE's truck on pile of rocks. When contact was made, EE unresponsive, truck running, doors locked. Supervisor broke window to get to EE, EE remained unresponsive. CPR started and continued while EE transported to Hospital. This appears to be a possible cardiac event. Investigation ongoing.
220260890006M12025EE was attempting to use pry bar to lift up shaft on roll press roll. As EE attempted the pry bar slipped and EE fell on right side, EE placed left arm to catch self and felt a sharp pain in left bicep.
220260890008M10692While grinding and wearing safety glasses got a piece of metal in eye
220260890009M11283End of shift, employee was exiting truck, and dismounting down ladder. EE missed the first step fall about 6 feet to the ground.
220260890011M13718Miner was standing on a box attempting to locate a part. As EE stepped down the box caved causing EE to fall back. EE's head struck the floor. EE's initial report of injuries was pain in neck and lower back, along with a laceration to the back of EE's head. EE was transported to Atrium Health for scans and X-rays. Miner was cleared with 4 staples and released for work.
220260890012M12175Lifting drive sprocket and lost grip. Hand was pinned between sprocket and adjustment bolt. Fatty portion of hand was pinched and slit open. PPE was worn to include gloves. Miner received stiches and no time was lost.
220260890013M12446EE was rotating the sand screws manually by grabbing a hold of the V-belts, as the EE was rotating the sand screws the EE's middle and ring finger was caught between the V-belt and Sheeve causing a Turf Fracture to the tip of the ring finger.  
220260890014M13147EE went to work on the replacement of middle deck screen weighing approx 275lbs. While EE was on bottom deck (pushing screen up to get over feed lip), other EE's were pulling the screen out, when pulling out, the screen got caught on something, it got directed back into shaker, falling downward, striking EE leg. 
220260890017M12235The incoming power from Rocky Mountain Power had a double tie line that tripped power.  This event was not produced by any equipment or process failures on WeSoda side.  RMP sent linemen out to address and fix the issue.   
220260890018M13007Employee had discomfort in lower back after completing sanitation tasks. Employee received first aid after the incident. On 3/16/2026 employee sought a medical opinion for persistent low back pain and was diagnosed with lumbar strain. Employee was given restrictions and prescribed physical therapy. 
220260890019M12746The maintenance employee was lifting a section of cutting-edge steel using a pry bar.  During this process, the cutting edge shifted unexpectedly, pinching EE's finger between the edge and the bolt. This resulted in a small external laceration on the outside of EE's finger.
220260890021M12756Employee was moving crusher break plates in storage building.  One of the plates started to fall over and EE pushed it back with EE's foot and felt a pop in EE's knee.  EE went for treatment on 03/19/2026 and was diagnosed with a right knee injury and primary osteoarthritis.
220260890022M13838A misfire was discovered at the face, the crew was bolting to secure the area to address the misfire. While scaling with the jumbo, the bit contacted the misfire setting it off. The crew failed to follow procedure which directs the bit to be removed from the steel to allow drill water to wash out the hole, had that process failed procedure requires blast crews to reblast the hole.
220260890023M1372803/13/26, at 8:00 PM, EE was unclogging bin #3 when a salt rock moved into the chute. Causing the employee's hand and bar to move downward. The employee's left hand struck the side railing of the chute on bin #3, impacting the lower left side of EE's left ring finger. On 03/16/26 a X-ray report indicated a closed displaced fracture of distal phalanx of left ring finger.
220260890028M11083Employee sustained a laceration to EE's right knee while cutting with a hand tool during a maintenance task.
220260890029M12666Employee was an air impact with reducer and socket. They went to the place the tool in place to tighten a bolt and felt a pop in their elbow. They were given self care treatment, but on 3/16/2026 they sought medical treatment and were given medication for treatment.
220260890030M12937Employee wasn't feeling well went to car and tried to leave other employee stopped EE to check on EE. figured out EE was having a heart attack pulled EE out Checked Vitals found no pulse and started CPR on EE. Employee called 911 and MSHA. EMS Arrived on location. and took EE to the hospital.
220260890031M13177At 19:20 the IP's heavy equipment caught fire. After EE's fire suppressant device failed EE opened the door to EE's vehicle, letting in the smoke before closing the door. After realizing EE should not stay in the vehicle any longer the IP evacuated the vehicle and went into EE's supervisors car awaiting medical aid.
220260890033M12315Employee sprained their left big toe while exiting a screen deck.  After three weeks, the injury did not resolve.  Follow up with doctor on 03/24/26 resulted in same diagnosis, but new requirement of work boot to stabilize the toe.
220260890036M12917On 03/05/2026 Subject was walking when EE strained EE's calf. Subject first went to the doctor on 03/09/2026 and was put on light duty restrictions.  The doctor has indicated that the subject is likely to be on light duty restrictions until May.  No further medical information is available.
220260890037M11854Employee was prying out some fender bolts in the process of removing the bolts the pry bar slipped causing the right index finger getting pinned between the pry bar and equipment frame.
220260890039M11293employee was chiseling stone with hammer and chisel and chisel slipped and EE hit EE's middle fingertip on left hand with hammer.
220260890040M11945While installing a side plate on a feeder, a vibrator activated and blew dust under EE's goggles and into EE's eye. EE went to urgent care, where a small lime particle was removed from EE's eye.
220260890041M12315Operator was attempting to fill in a hole from where the shovel came out of. While pushing material, the operator claims that they came to a sudden stop causing them to be jarred forward. Operator went restricted duty on 3/11/2026.
220260890042M11474Employee was diagnosed with a standard threshold shift by Dr on 03/19/2026, this hearing loss is consistent with noise induced loss in the left ear
220260890043M13758A Haul Truck was being loaded by a Shovel. During the third dipper, a boulder was at the top of the dipper leaning on the teeth. When the bottom of the dipper opened, the boulder did not fall through with the rest of the load. Instead, it rolled over the teeth, hit the driver side of the haul trucks canopy and fell to the ground. Operator went restricted duty on 3/12/2026.
220260890044M13628Employee was bent over moving under a structure and stepped over a cross member when their forward knee gave out, causing a fall. Their rear foot became caught in the structure, and they heard a pop. A coworker provided first aid and notified a supervisor, who transported the employee for medical evaluation. Injury was a knee ligament separation from the bone.
220260890045M12205Pre-existing condition stemming from heart problems and malfunctioning defibrillator.  While operating a water truck, miner experienced chest pain and dizziness and passed out after exiting the truck and asking for help.
220260890046M12275A fire was observed at the northeast corner of the clinker cooler. Oil that leaked from the hydraulic system was ignited by hot material (approximately 1500F) that came from an undetected hole in the wall of the clinker cooler 
220260890047M13137Employee was moving 4'x8' screens on tower 1 with another employee. They lifted the screens about 2 inches off the ground and approximately 10ft down the catwalk. Shortly after this process was completed the employee felt a strain in EE's stomach and noticed a protrusion from EE's belly button. Umbilical hernia.
220260890048M11614EE was moving an idler for conveyor. One end was in the air and fell on EE left foot missing the steel toe of EE's boot by an inch. Idler is 82" long by 6" wide.
220260890051M11684Employee was working to get EE's hammer from the welding truck. While holding the tool box open the hammer slipped from EE's other hand and hit EE's left middle finger.
220260890057M12065Employee was in elevator and it got stuck between levels 1 and 2 on the preheat tower. MSHA hotline was called as required. Fire company and site rescue team were able to safely rescue employee at 7:50 am. 
220260890058M12897Employee asked another employee to release bucket on skid steer. employee raised bucket tilting it down. employee stood in front of bucket (in the line of fire) released the pins and the bucket slid off striking employee in their left foot. EE sustained fractures to 4 bones in their foot.
220260890059M12496EE was involved with installing v-belts when they became twisted. EE was manually rotating the v-belts on the pulley to straighten them when the pulley unexpectedly rotated causing the EE's finger to become trapped between the pulley and the v-belt.
220260890063M11403The employee performed an annual hearing test at the start of their shift. Results shows that the employee has a reportable threshold shift.
220260890064M13307Emp was working with two other emp installing erosion control matting and grass seed on a dirt slope.  While placing rock and staples for holding the matting the emp right foot slid into a washout causing them to fall. Their foot was wedged in the washout and remained stationary as they fell resulting in twisting to their ankle.
220260890065M11454Employee sat up, their hard hat fell off, and they bumped their head on the edge of their toolbox. They recieved 12 staples at the Emergency room
220260890068M12406Employee was attempting to separate the bearing race from a bearing on Silo 9 when they received an injury to their right hand. The bearing race was impacted by the hammer and splintered. A piece of the race became lodge in employee's hand.
220260890069M10692The final stop switch on the Koepe faulted. Evacuation was canceled. 
220260890070M13408Cone feeder was stopped due to rocks in the belt/tail drum. The guard was pulled to clean the area. Employee reached in to possibly brush out more rocks, their arm and hand were pulled into the machine and wedged between the belt/tail drum. Their arm rolled with the belt and was pushed out by the machine. Their hand had lacerations on it.
220260890071M13157EE was walking past an unoccupied jammer underground when they slipped and began to fall. EE struck out right hand to catch themselves, contacted a broken bolt sticking out of the rib, lacerating right palm. Seen at clinic, wound closed with sutures, and EE released to restricted duty. Site offering modified duty.
220260890072M13768Driver of crew change bus parked with front wheels in parking ditch. Upon leaving, they went forward, accelerated, causing the rear tires to enter the ditch at a higher speed, and the rear of the bus to lift. EE's seated in back of bus lifted from seats, and this EE landed awkwardly. EE was not wearing a seat belt. Seen at ER, released to restricted duty due to back strain.
220260890075M12075While cleaning P92A ore pass grizzly in P91 at around 21:25 of plug reversing in 1st gear, hit rib with left rear corner of loader.  Upon contact with rib, low speed, felt sharp pain in front right shoulder.
220260890077M11333An unresponsive truck driver was found in the driver seat of their haul truck. 9-1-1 was notified at 12:51P on Friday, March 6, 2026.
220260890078M12566At approximately 11:55am, the Line 3 scrubber drop out box ruptured releasing large volumes of water onto the floor. The employee was likely north of the launder when the water swept them down the inclined walkway wedging them beneath the kiln pier stairs.
220260890080M12836Elevator was in the process of being test ran after previous repairs, during test run, elevator and one miner was stopped at the top landing unable to exit or move. Repairman was onsite and able to open the elevator and move to ground level. Miner was in the elevator for 33 minutes.
220260890083M10963Employee got a pinky finger smashed between 2 screens. Nail came loose and it was glued back on.
220260890086M13748Injured Person was replacing the classifier bearing assembly. The assembly became lodged due to alignment. The injured employee had hands underneath the assembly, attempting to correct the alignment. Subsequently, the assembly dislodged and fell onto the injured employee's hands. This incident resulted in a broken ring finger and lacerations to the ring and index fingers.
220260890088M11714The employee was entering a skid steer, lost their footing and fell backwards, catching their left leg between the skid steer and the fork attachment fracturing their leg.
220260890091M12045Employee was performing maintenance work on an electrical motor that drives the screen deck. After losing balance when the nut/bolt started to loosen, they caught himself from falling with their left arm.
220260890093M11103Was performing work off a worktable when the table shifted and a vibrator fell from the under shelf onto foot.
220260890095M10482Slipped off ladder. sprained left knee and ankle
220260890096M12295Operator was cleaning the operator cab windows from the drill deck, upon re-entering the cab the operator slipped on mud on the deck surface and fell at level impacting their right knee on the floor of the cab causing discomfort.
220260890105M10802Employee was swinging a sledgehammer inside of a controlled environment garage. 
220260900001M12045Emp was driving mantrip from A6 to lang shop when EE veered off the road and came into contact with rib. Emp. taken the emergency room and EE was given a prescription for Ibuprofen 800mg. No restrictions.
220260900004M13107Employee was performing routine cleaning of clogged screens in the dry plant due to wet sand buildup. While inspecting for a blockage, the employee opened the diverter access door. Accumulated hot sand was released from the chute area and contacted the employee, resulting in burns requiring medical treatment.
220260900006M10802Operating light vehicle and struck a bollard resulting in a broken right radius.
220260900007M13097Employee was gripping a screen by putting EE's fingers through the openings to lift it. As EE was picking it up, it caught against another screen as EE pulled up, it came loose dropping and pinching EE's finger between the two. Employee sustained a cut to a finger on EE's left hand and received six stitches.
220260900010M10762Employee got out of loader to pick up a chain. Pulled a muscle in their leg.
220260900011M12856Employee was setting granite blocks on saw yard to be sawn, as employee was walking/moving the blocks they slipped on mud and fell backwards landing on their back, employee was given a prescription medication. Employee returned to work with no restriction, no lost time, no lost wages.
220260900012M13548Employee was replacing a transmission in a pick-up truck. They used a floor jack to lower the transmission. While lowering the transmission, it became unstable and started to roll. When it did, the employee smashed their finger between the transmission and the jack. Their right-hand pinky finger had a laceration that required sutures and fractured tip.
220260900014M12446Employee was using an 8-foot steel bar at the P 9/10 chute to remove a slab (rock) at the bottom of the chute. As the employee was attempting to hit the slab, their left hand hit the bottom of the chute door and smashed their left pinky finger.
220260900015M13588Employee using a hammer to tighten a bolt with a striker wrench. Hammer glanced off cover of crusher, smashing a finger between frame & handle of hammer. Did 1st aid, employee refused the er at that time, going home & later decided to go to a clinic having no fracture, received 3 stitches. Missed one day, returning on Friday 3/27/2026 with no restrictions.
220260900016M11704While removing parts from a cone crusher, a pry bar was being used to spin a part, the bar slipped causing the employee to slip landing on their left knee causing injury.
220260900018M10411Metal HEPA filter frame and latex gloves.
220260910001M12195when removing tail pulley assembly, employee was removing belt with utility knife.  System was locked out for seasonal maintenance.  Employees hand slipped causing knife to cause laceration on finger requiring stitches.
220260910004M12766John was checking on employees on the dredge in the pit.  EE exited EE's truck to walk to the berm of the pit for a visual inspection.  Upon exiting, EE stepped into a hole where a tree had been removed.  EE fell, but EE's leg/ankle stayed straight in the hole, hearing a pop.
220260910007M11634Miner was climbing down from a ladder on the plant, stepped on a rock or uneven surface at the bottom of the ladder and twisted EE's ankle, resulting in a fracture
220260910009M13227While scaling in 33 West, a rock fell from the back and struck the scaler boom jolting the cab causing the operator to hit the windshield with EE's forehead and right shoulder. The operator was wearing a seat belt. EE as a mild concussion and a strained A/C shoulder joint. Scaler equipped with a lap belt style seat belt.
220260910010M11684Employee experience back pain while trying to hook up a tow cable to a piece of equipment.  Employee complained of pain, so EE was taken to the hospital for evaluation.
220260910011M11574Employee was changing a valve when a bolt broke causing the valve to swing and hit EE knocking EE off of the ladder. Landed on their hip on the concrete pad.
220260910012M10401Dismounting D11 Dozer in the Truck Shop.
220260910013M12897The cone crusher stopped working, the employee traveled out of the plant shack to turn off the belts in the plant. Upon returning back to the plant shack they experienced pain in their right knee. On 3.23.26 the employee received an injection in their knee making the injury reportable.   
220260910014M10542Ankle sprain from routine travel. Missed bottom step. 
220260910016M10822Haul truck struck embankment. Driver sustained injuries requiring hospitalization.
220260910018M11464ERT training employee was acting as an unconscious patient.  During a planned patient move another rescuer stepped on the employee's pinky finger.
220260910019M12626Employee was in the rollout chute removing a piece of 6" metal used for making 57's and then added plate steel for making 67's while doing this EE struck their ribs left side and stated they thought they felt a pop in their ribs and was having trouble breathing.
220260910020M10872TM smashed finger while changing a main plate at WRP causing two lacerations to finger.
220260910021M12235Employee was walking on a barge catwalk that was wobbly and washed out at one end. Unsecured floor grating popped up when the employee stepped on it causing them to fall and strike a knee on the next piece of floor grating.
220260910022M12375Employee reported pain in LT pinky after using a hammer to move a grizzly bar. Employee was evaluated and received 3 stiches, rigid splint, and an antibiotic prescription. X ray confirmed fracture in tuft. Employee released to full duty.
220260910023M12576EE was grabbing a fuel can in the garage when they were walking, they stepped over the hammer bit, lost footing and fell. EE has a laceration on left hand and right knee. Employee is complaining about left arm pain. Taken to medical facility for evaluation.
220260910025M11574Employee was leaving shack to move the track mobile off the tracks. The wind picked up and blew a large amount of lime in their face, getting into their eyes
220260910026M11935Employee was pulling on a rock with the scaling bar when they felt a pain in their stomach. They went to lean on the cage and felt a sharp pain in stomach. This became reportable on 03/13/2026.
220260910027M10712Employee alleges while stepping off of machine, left knee was strained.
220260910029M11163Employee alleges while stepping back from master control center unit, they fell to the ground and strained shoulder.
220260910030M13247While employee was removed tires from a connex for delivery, they noticed overlap of tires with an adjacent stack.  As additional force was used to move the overlapped tire, the adjacent stack became unstable causing some tires to fall and strike the employee which resulted in the employee falling and straining their back.
220260910031M10802Fractured index finger descending stairs. Hand caught between rail and structure
220260910032M13478While changing out gearbox on head pulley of 453 belt. While doing so the employees were adjusting the gearbox on the forks of telehandler when employees finger was smashed in between the motor base and a prybar they were using to adjust the placement of the motor base. Employees right index finger received a laceration and fractured fingertip. 
220260920001M11153Injured employee reports that EE was climbing down the loader ladder, EE missed the last step and fell onto ground.
220260920004M11504Employee was on the phone w/inspector when they saw fire. The excavator was feeding a fire when it caught fire. See attached documentation and photos.
220260920007M13337Employee states EE was welding on 3/27/2026 when a spark went under and in welding jacket. Employee states EE brushed it off and went about EE's normal day. EE reported that EE's injury may be infected on 3/30/2026 and was taken to a clinic for evaluation and prescribed antibiotic cream. No work restrictions were given to employee.
220260920008M11824Employee struck EE's mouth on a support beam while walking along catwalk. The impact caused bleeding and loosened several upper front teeth, though no external facial injury occurred
220260920009M11313A manual slide gate closed too quickly on a miners right hand. The impact caused a  fracture and a laceration requiring 8 stitches.
220260920010M13788As employee was walking on catwalk to plant from production break room EE tripped while stepping up a set of two stairs. As the employee was falling, EE extended EE's left arm out in front of EE to break EE's fall onto the grating. The area was clear of debris with a light coat of dust. At this time, we don't know the result of injury but there is bruising to chest and bicep.
220260920012M11664Employee working under other employees checking on a dust collector when a small amount of debris fell hitting employee on the top of EE's hard hat causing neck pain.
220260920013M10612Production hoist blew a hydraulic line, making it inoperable.
220260920015M11444Employee was running through the plant area and felt a pop in EE's left hamstring area. Injury is believed to be a strained or pulled hamstring.
220260920016M13578Tunnel feeder had concrete chunks get stuck on crossbeams and needed to be removed before any more material is fed into the feeder. Employee took a 12lbs sledgehammer and tried to break material, this did not work. After this task the Employee felt pain in their right hand. Employee did not report the pain until 03/27/2026 at 630am after medical treatment
220260920019M12105Employee has transferring material in a wheelbarrow when EE made contact with a stationary steel fan shroud. EE's left pinkie finger tip was pinched between the left wheelbarrow handle and the fan housing edge.
220260920020M11965Employee tripped over a 3-inch pipe that was staged for an outage outside of the maintenance shop. The employee fell to the ground and landed on EE's left upper torso, resulting in fractured ribs.
220260920021M11303While operating a loader when EE hit EE's elbow on the arm rest when EE ran over a sand pile. Incident not reported until 5/23/26.
220260920022M13007While performing mechanic duties, HOLT employee and Weisman Equipment contractor,  was embedded in the left chest area by a small piece of metal shard from a piece of equipment. The employee was taken to a medical facility to receive medical treatment and the foreign body was removed from the chest.
220260920024M12927The employee was holding an 8" HDPE pipe while the other employee was unbolting the steel flange at Pad 6/7 - pipe lay down yard. Once the upper bolts were removed from the HDPE pipe, the spool shifted, and the steel flange swung down, striking the left pinky finger, smashing and lacerating.
220260920025M13538EE noticed the forklift EE was operating was running low on propane, so EE decided to replace the almost empty propane cylinder. As EE was putting the empty propane cylinder in the slot, EE's right ring finger was caught in between two propane cylinders and felt a sharp pain on EE's finger. EE ended up with a deep laceration on EE's right ring finger.
220260920026M13758Operator inspecting cylinder bushing while lowering grizz, put left hand on frame inspecting bushing, bar came down on fingers. Bar automatically closes, operator did not realize was close. Surgery left, middle, pointer finger tips same day. Discharged same day incident. Bone broken past last joint of fingers.  Operator cleared come back work with restrictions 3/27/26.    
220260920027M12185Operator was changing out a bit; they stepped off of the deck and when their left foot made contact with the lower deck of the drill, they felt their left ankle roll to the outside and felt sharp pain in the left knee.
220260920028M13408Employee was manually moving a 55-gallon drum of DEF off of a containment pallet with the assistance of another employee. The drum shifted during moving, and the employee injured their right shoulder when they tried to steady the drum. Physician diagnosis unspecified injury of muscle(s) and tendon(s) of the rotator cuff of right shoulder.
220260920031M13117Employee was loading a truck with 200 lbs rip rap and one boulder fell off and they didn't notice it. They pulled forward running over the top of the boulder, that caused them to jar their back.  Went back to work but as the day progressed so did the pain in their lower back and they notified their supervisor.
220260920032M10963A maintenance employee slipped on the 3rd step from the bottom landing rolling their left ankle.
220260920033M12385Employee was accessing the second deck of a Diester screen to check screens and their knee dislocated while getting in the screen.  After imaging it was determined they had torn ligaments.  Employee is now scheduled for surgery on 4/10/26
220260920034M11173IW was using hammer to loosen wedge blocks. A shard of metal came loose and stuck in their arm, causing a laceration.
220260920035M11834EE was installing idler. Pushed on idler to put bolt in to hold idler from moving EE felt a pop in their right wrist. Medical treatment sought. Work restrictions issued due to sprain.
220260920038M11053Employee was using a hammer when it glanced off and struck their left index finger, causing a laceration.
220260920039M12856Mine operator twisted ankle while exiting a transport van. Medical examination assigned work restrictions. Operator returned to work next shift but declined to perform restricted duties. Operator reports ongoing physical therapy for injury and has not returned to site in any capacity.
220260920040M13077Employee was working under machine while servicing a loader CO UNIT# L-27 when dust fell into their right eye. Employee went to urgent care after flushing eye and still feeling like something was in it, employee was told nothing is in there and there were some scratches. Employee returned to work next day.
220260920042M13798Found an issue with the 5th floor door flag so it was adjusted. They also adjusted the contacts on the flag on the 7th floor. They then rode the elevator to confirm the issue was resolved. Once they were comfortable, they turned it over to the plant operations to resume operations and monitored the elevator form the machine room for some time to confirm everything was working.
220260920043M12907Employee was using an electric stair cart to move a 55-gallon drum of oil. The cart tipped forward causing employee to strain their lower back. Employee was released back to work with temporary restrictions. No bending, lifting, carrying, pushing, pulling, kneeling, squatting, or twisting.
220260930001M11834At approximately 8:50pm a ground fall was reported in the MBD2894. The ground fall occured on day shift and was witnessed by two geo techs. Approximately 150 Tonnes of material fell. 
220260930003M10882using a razorblade knife to cut a piece of a belt and cut EE's index finger on left hand
220260930004M13618The employee was working on the platform level of 471-BF-07. EE was raising cages by a rope to the upper section of the dust collector. EE looked up to communicate with the another employee. EE stepped backwards while continuing to look up and tripped over an empty box. When the employee braced EE's fall with EE's hands causing the injury to EE's right wrist.
220260930005M13157Employee performing maintenance work involving the replacement of belts when EE's right index finger became caught between the belt and pulley.  Contributing factor included the lack of complete hazard reassessment during the task, resulting in unsafe hand positioning. Fracture to the tip of the right index finger
220260930006M11423Working on the mono drop-out line had the guzzler hose down into the ditch, propped up on EE's knee, then EE twisted EE's knee and felt a pop.
220260930007M11484Employee opened an angle cock valve on the back of a rail car to bleed pressure. while opening the valve the hose whipped up and struck their elbow.
220260930008M10872The employee was operating a warm water return valve and felt pain in their lower back.
220260930009M10451Employee passed out while driving dump truck.
220260930010M11644employee was unplugging a product line with a vacuum truck when the product freed up and pushed the hose out of their hand causing product to hit them in their face
220260930011M11313Employee was tracking the trommel plant to the pit. Something popped and struck the employee on the middle finger of the left hand.
220260930013M12175Employee was helping free a frozen switch when they lost grip and stumbled backwards. Right knee injury occurred and employee was able to continue work activities until surgery restrictions put into place on 3/26/2026
220260960001M12375employee was helping  replace a cone liner using a sledge hammer to loosen three inch nuts from liner while striking the nut broke loos resulting in the nut falling on employees foot breaking little toe on right foot requiring 9 stitches
220260960002M11013Improper use of PPE, using leather gloves instead of impact gloves. Body positioning, hand placement.
220260960003M11373Miner was loading the heading of decline project when a section of shale from the roof fell striking EE in the basket of the Anfo Loader.
220260960005M10742Applying pressure to the side wall of the primary plant with a porta power
220260960006M13658On 01/21/2026, EE went to warm up EE's machine. In the process of walking over to EE's machine to access the ladder to climb into the cab EE slipped on a patch of ice falling backwards. As it was dark when EE parked EE's piece of equipment EE had not seen the patch of ice. It was early enough in the morning EE could not see the patch of ice in the morning either.
220260960008M12295EE was attempting to move a rock that weighed approximately 40 lbs. from the catwalk. When they swung the rock, it did not clear the middle handrail and pinched the tip of their left ring finger between the handrail and the rock.
220260960011M12917Employee was working with another employee to stack Rotex screen decks when a stack of screen decks on the ground next to them tipped over, contacting their right ankle. The employee was evaluated with an ankle contusion and given light duty restrictions. Employee has not missed any shifts.
220260970002M12305Miner was helping lower a chute on the secondary plant, EE and two other employees were using come-alongs to lower the chute into place. They let the chute drop halfway down, and it landed on the Miner's right hand, fracturing it.
220260970003M11103IW & coworker were installing a roller and IW pinky got caught underneath, causing a laceration and fracture. 
220260970009M13688Employee walking up ramp bent over to retrieve an object. A forklift operator backing down the ramp with a load did not see the employee, knocked EE to the side of the forklift and ran over EE's right foot. X-rays did not show any fractures. The ER released employee to work with no restrictions. A doctor visit on 4/2/26 prescribed light duty until swelling subsides.
220260970012M12826Employee was operating an open cab forklift outside when the wind speed increased. The employee got dust underneath their safety glasses and into their eye. They flushed their eye and the following morning had irritation. They sought medical treatment and were given a prescription.
220260970013M12937EE was knocking build up out off the screen discharge hopper with a 3' pry bar. EE went to hit a piece of buildup on the hopper, and the bar hit a crossmember causing it to be knocked out of EE's hands. The bar fell and hit the inside of EE's left ankle causing a scratch that became infected.
220260970015M10932Was using a come along and gear stripped out hit hand on a piece of steel Fracturing finger. 
220260970019M12716Employee was crawling out of CR02 chute after using a jack hammer to break rock plugging chute. Employee was pushing the jackhammer in front of EE. it caught a rock causing the bit end to pop up towards the employee, striking EE in the teeth. resulting in a broken tooth.
220260970020M10852Employee fell forward hitting their face while moving vacuum hose up a concrete ramp.
220260970021M13087The employee was assigned to inspect the clinker weigh feeder due to clinker chunks that could plug the system. They lowered themselves through the safety cage to reach the clinker weigh feeder, dropping their hard hat as they moved.  They hit the pins with their head as they moved up, causing a laceration.
220260970022M13718Operator was assigned snow removal work in the pit.  Operator stated after work they started having knee pain.   While climbing the ladder they felt pain in their knee. Employee requested to be sent off site and wanted an MRI of their knee.  We waited to get the results before filing this report. They got an MRI and reported the results their knee will require surgery.
220260970023M12395The employee was cleaning up used vac hose (6" corrugated piping) when they pushed some filled piping over the the toe plate and as it was going over the end whipped up and slung cement dust into their eyes. Prescription drops prescribed. 
220260970025M10872Employee was hit with a clevis in the mouth resulting in a busted lip and broken teeth.
220260970027M12416Employee was coming in to begin the shift when they slipped (no fall) in water on the men's locker room floor.  They reported the incident to their supervisor but did not seek medical attention until 4/6/2026 and was given work restrictions.
220260970028M13057At approximately 6:30am on 03/30/2026 EE informed incoming production supervisor that at approximately 10:00pm the night prior (03/29/2026) they had felt a "pop" in their left wrist while turning a wrench. EE denied medical care when asked and offered a ride to the hospital by the supervisor three times.
220260970029M12656Injured was poking the built-up coal out of the chute to the transfer screw using a 1/4" piece of round stock steel. The poker made contact with the screw conveyor below, causing it to pinch their finger and cause a laceration on the ring finger of their left hand.
220260970030M12436While clearing out full mechanicals on K22, PA had some CKD flush out through the port they were poking through. The dust contact on the PA's skin caused some irritation; later, the PA was diagnosed with second-degree burns in the neck region.
220260970034M13368EE was cutting piece of steel with 21" torch out of the stilling well in 4 Tails Hydro. EE cut from the bottom of seam leaving ~6" gap in middle, then cut seam from top down. The piece of steel shifted, broke off, and fell backwards over top of the rake making contact with EE left arm and face shield resulting in stitches to the nose.
220260970035M12887Two employees were performing patch work on a chute while cutting a existing piece of metal approx 1'x1' approx 3/8" thick off the piece of metal hinged and swung roughly 4' and fell 4' onto the EEs foot. The sharpe corner of the metal penetrated their boot and cut the top of their foot.
220260970036M10993While cleaning a flowmeter for install, employee cut right finger on the sensor requiring stitches.
220260980001M13488While assisting a contractor that was repairing a scraper at A03 in the A Frame, a material handler miner got hit by a piece of pipe previously removed fell down the working platform while EE was standing in the underneath catwalk and resting EE's right hand on the fix ladder cage. This struck caused EE an open wound fracture to EE's right pinky.
220260980003M11965EE stepped on platform of an isolated catwalk that collapsed beneath them causing them to fall approximately 7 feet to the next level. EE sustained superficial lacerations and bruising/soreness.  
220260980004M11975EMPLOYEE STEPPED ON A ROCK AND STRAINED LEFT KNEE WHEN THEY WERE GOING TO TIGHTEN A HYDRAULIC HOSE ON A SCALER BOOM ON 03.09.2026.  03.30.2026 THEY WENT TO THE COMPANY DOCTOR AND BECAME LIGHT DUTY.
220260990001M11494Employee was working down by ball mill 6 and 7 in the cyclone feed pump build up area. Employee was using the bolt for a hammer and smashed a finger.
220260990002M13698One employee was attempting to dislodge a rock in the top part of a cone crusher. the employee failed to lockout the feeder feeding the crusher. when the plant operator attempted to start the plant the feeder started spilling rock. The other employees noticed what happened and had the feeder turned off. A rock however did fall and strike the employee in the shoulder.
220260990003M12045EE finished greasing the crusher and was climbing down and didn't notice the cross bar and stuck EE's hand thru it and as EE was stepping down EE's index and middle finger on EE's right hand were pinched.
220260990007M10642EE suffered a shoulder injury while lifting a fire extinguisher.
220260990008M10331Hearing- Standard Threshold Shift
220260990010M12466While cleaning in the wash plant tunnel, employee slipped on aggregate material on the floor and hurt EE's knee. EE requested to be evaluated at the occupational clinic where they prescribed restrictions along with medication for the knee injury.
220260990011M12446On 2/27/26, an employee performing a routine inspection of Rotex Screens felt a strain in EE's left shoulder while reaching overhead to close a top door latch.  Employee sought additional treatment on 03/26/26 and was placed on restricted duty.
220260990013M12626Unstable oversized material in the jaw crusher was not secured. EE attempted to manually chain it, exposing their hand to a pinch point between the rock and crusher wall. This resulted in a pinch injury causing a laceration to the middle finger on the left hand.
220260990014M11604While making a turn on SP11 dump in HT 62, the employee bumped their right elbow on the Haul truck steering wheel spoke and caused swelling and right contusion 
220260990015M11403Employee was lifting a piece of steel and twisted EE's knee. Went to hospital for x-ray. Was told to wear knee brace and perform light duty.
220260990016M10722Operator stepped out of loci at the 65 722 and rolled ankle on a rock.  
220260990017M13107Employee #1 was standing near Employee #2, who was using a hammer to remove a bearing from the manlift. Employee #1 suddenly felt pain in EE's wrist and, upon lifting EE's sleeve, observed a small cut. EE was transported to Excel ER, where an X-ray revealed a small piece of metal embedded in EE's right wrist.
220260990019M12245Mechanic reported being bitten by a wasp on EE's left wrist during a hooper area inspection. The following day, the employee presented with redness and swelling. Medical attention was sought, and antibiotics were prescribed.
220260990020M13077Climbing up to put oil in the water scraper, EE's left foot got caught on the lip at the top. EE stepped up with EE's left foot and was bringing up EE's right foot and EE's left foot slipped. EE had a hold of the hand rail and tried to catch self, EE's right foot got caught on something causing the injury.
220260990021M13838An employee was attempting to pry a rock loose in the hopper when the pry bar recoiled & struck EE's safety glasses, resulting in a laceration to the bridge of EE's nose. EE stopped work & was transported to Ward County Hospital's Emergency Room, where EE received five stitches. Following the incident, the employee failed a post-accident drug test & EE's employment was terminated.
220260990022M11804EMPLOYEE WAS ASSISTING OPERATOR IN PULLING A WATER HOSE OFF A HOSE REEL WHEN THEY FELT A PAIN IN THE LEFT SHOULDER. EMPLOYEE WENT TO THE DOCTOR 04/07/2026 AND IS NOW ON LIGHT DUTY.
220260990023M13558The employee was attempting to calibrate the TA duct damper with a manual handle. While operating the gate with the LCB, the damper was moved to a fully open position. The employee applied firm pressure to move the manual operation handle, the counterweight pulled down, and the handle began spinning rapidly in an uncontrollable manner with heavy force. 
220260990024M11303Grizzly bar made it into the Impact, Employee entered and tried to dislodge the bar, resulting in a strain to their lower abdomen.
220260990027M11985Worker was folding up a tracked screen plant to do some maintenance on.  When folding up one of the side discharge conveyors they slipped and fell on their shoulder and face.  The ground was frozen.
220260990028M12406Employee was lifting and turning their leg when it broke. This is the employee that had previously broke their leg at their house in August 2025 and it's the same exact leg. It fractured in the same location of a previously installed screw.
220260990030M13147EE was exiting skid steer inside the maintenance garage. EE tripped and fell forward onto their hands and knees. The EE's knee hit the concrete floor first and felt a twist in their knee. EE had pain in that knee and was taken to urgent care. EE was given a work restriction of no kneeling or squatting for 5 days.
220260990033M10902EE middle left finger fractured when struck between bucket tooth and shank of WA800 loader
220260990034M11704EE reported feeling a popping sensation in left wrist while using a pipe wrench. EE reported some tenderness in outer part of left wrist. No swelling or deformity noted. 
220260990035M12115EE was walking from the jaw truck to conveyor when EE stepped on a rock and rolled EE's right ankle outward.  EE continued working for the remainder of the week and did not seek medical treatment until 4/3/2026.
220260990037M10512Dogging system on #3 hoist is not setting properly.
220260990040M13748It was sleeting when subject was descending a metal grate staircase when they slipped. Subject grabbed the railing and heard a pop in right shoulder and felt pain. Subject also felt pain in right ankle. Subject has returned to work but is awaiting medical follow up. Subject is employed by Yaggy Trucking and not a miner. Yaggy trucking does not have a contractor ID number.
220261000001M11824At approximately 8:50pm a ground fall was reported in the MBD2894. The ground fall occured on day shift and was witnessed by two geo techs. Approximately 150 Tonnes of material fell.
220261000002M12085Employee alleges that EE was retrieving a tool from EE's truck toolbox and a strong gust of wind blew the toolbox lid shut, the lid hit a wrench causing it to fly up and cause abrasion to employee's upper lip
220261000003M11965Employee was placing a vibrator on a gyp car, as EE was placing the vibrator on the bracket on the car, EE felt pain in EE's abdomen. Meet reportable criteria on 4/2/26 when EE had hernia surgery.
220261000004M10702Laceration on left thumb while cutting zip tie off a new tool package.
220261000006M13688The maintenance lead was assisting in retrieving the dredge steering cable anchor out of the water that was attached to the steering cable of the dredge.  Rapid movement of the cable laterally made contact at ankle, knocked them off their feet and pinned them to the ground. Bruising of the ankle, scratches and contusion to the skin, ankle and knee sprain(right leg).
220261000007M12696During a tail screen change at the West Dedicated Plant, an employee was potentially exposed to HCN. After the task, the employee reported lightheadedness and nausea, was evaluated at the onsite clinic, and transported to a hospital. No injury or illness was diagnosed.
220261030003M12586FOLLOWING A REPAIR TO THE ROLL SCREEN, THE INJURED TURNED THE MACINE BACK ON TO TEST THE OPRATION. THEN EE ATTEMPTED TO REINSTALL THE GUARD WHILE THE MACHINE WAS  RUNNING. EE'S GLOVE WAS CAUGHT BY A SPROCKET, PULLING EE'S FINGERS INTO THE SPROCKET AND CHAIN.
220261030005M13658At approximately 10:35 PM on 4/1/26 smoke was observed inside the refinery via camera feed in the AARL Control Room. Security was notified. By 10:50 PM the affected cells were fully engulfed. Fire suppression was activated at 11:01 PM, and the fire was fully extinguished by 12:25 AM. No personnel were inside the refinery, and no injuries occurred during incident.
220261030006M12055Employee was walking backwards pulling a water hose and twisted EE's right knee after EE tripped on a 10-inch rock. Taken to doctor for evaluation and diagnosed with knee sprain. Placed on restricted duty.
220261030007M10241CARPAL TUNNEL LEFT WRIST
220261030009M11874Employee was walking towards the tumbler and slipped on some ice and struck EE's right knee on the ground. EE was treated at an urgent care, returned to work with restrictions for 5 days.
220261030011M12165Employee was welding on 02/11/2026 and felt a little splinter of metal bothering EE's finger but initially did not seek treatment. The following day EE decided to seek treatment as it was still bothering EE's finger.
220261030013M13698One employee was attempting to dislodge a rock in the top part of a cone crusher. the employee failed to lockout the feeder feeding the crusher. when the plant operator attempted to start the plant the feeder started spilling rock. The other employees noticed what happened and had the feeder turned off. A rock however did fall and strike the employee in the shoulder.
220261030016M13388Ee had climbed up into EE's haul truck and sat down. EE dropped a paper, pulled the arm rest up to reach the paper, when EE felt a pop in the right side of EE's right shoulder, then instant pain. Seen at ER, diagnosed with a right proximal humerus fracture. EE has been diagnosed with osteopenia which can lead to non-traumatic fractures.
220261030017M10882Employee slipped carrying 2 gallon can of oil at the topsoil screener and sprained ankle
220261030018M12776Ee was disconnecting a fire hose, walking while looking down, turned EE's head and ran into the outrigger of a crane with EE's face. Fractured EE's front teeth. Seen at Any Day Dental for treatment starting on 4/7 and went back in on 4/8 to complete. Released to full duty 4/9.
220261030019M12726Ee reports steam cleaning on top of shovel when EE slipped an fell, landing on EE's right side and shoulder. Seen at ER where EE was diagnosed with rib and back contusions and shoulder strain. Seen at ortho on 4/9, diagnosed with AC joint separation. Referred for surgery.
220261030022M12285Employee slipped, fell on their back and hit their toe on something that was nearby and also hit their head on the ground. Employee said they felt fine but out of precautionary measures we sent them to the clinic for a check up.
220261030023M11043Employee was at the belt press area, they slipped and when they fell, they hit their head on the ground.
220261030024M11033While walking down the stairs while raining, the employee slipped and fell on THEIR right pinky finger.
220261030025M11454Employee was trimming rubber for a back skirt on a conveyor belt. While cutting the rubber the razor knife slipped and cut the outer right thigh.
220261030028M11694Employee was installing a door at the backend of the kiln. They knelt down to retrieve a tool from a coworker and rolled their right ankle. Resulting in an ankle sprain.
220261030029M13838EE was performing inspections when they noticed dust burping from the vent line above the feed bin on the fourth floor of the Preheat Tower. They said they looked up to identify where it was coming from when dust vented out and landed just above their glasses under the brim of their hat. Dust entered their left eye causing irritation. They received antibiotic ointment for the eye.
220261030030M12696Employee was working underground in a drilling area with dusty conditions.  Employee's N95 face mask was not properly fitted to employee causing dust to leak around the seal to nose and mouth.  Employee stated that it was hard to breathe and needed to go to the doctor.
220261030032M11313Power loss overnight, when we restored power we found the system needed to be rebooted. We rebooted the system it started working. 
220261030033M12876The bulk loader proceeded to clear the air slide and opened the clay belly to address a clog using an air hose. Upon opening the air valve, cement was expelled in the opposite direction, resulting in cement entering THEIR left eye. Eye wash station used, but followed up with eye doctor.
220261030034M11123While traveling to the primary crusher, Haul Truck 17 veered into the berm and came to rest on its non-cab side.
220261030035M11183Employee strained their left bicep while pulling 1-1/2 inch water hose to second level dewatering screen for cleaning.
220261040001M12406EE was climbing the ladder of the shipping loader to go to work. When climbing the shipping loader, EE missed the step and fell backwards. EE landed on the ground on EE's right shoulder and back then hit the upper back portion of EE's head.
220261040002M11694While a miner and EE's partner were building a sand wall, the center cap came down coming in contact with the miner's leg. Resulting in a hairline fracture to the tibia.
220261040004M13838crusher operator shut down stalker #18 overloaded with material. Climbed up a ladder, loosened nut from a guard that needed to be removed for cleaning. EE used a shovel to pull the guard down, it fell and got caught up with the guard underneath, fell and struck hard hat, then right shoulder causing a laceration on right shoulder. Took EE in for medical where EE received 4 stiches.
220261040005M10512hand caught between pipe being raised and structure
220261040006M10251fell down a set of stairs
220261040009M10922Grinding lacing on a belt. Sparks were flying and with the wind sparks flew in the right eye
220261040010M12656At 9:35 safety was notified that the #3 hoist, our primary escapeway was not operating properly. Crews were evacuated out the secondary escapeway. It was found there were bad sensors. The sensors were replaced and the hoist returned to service later that afternoon.
220261040011M11704Employee was putting a shop rag into the haul truck's door to stop the "rattling" sound and when closing the door, they had slammed the door on their right middle finger.
220261040013M10612Employee rolled their right ankle while walking around plant.
220261040014M13738EE using hammer to loosen a bull hose from cam fitting. Other EE assisting and pulling on bull hose. Bull hose released unexpectedly while the EE was swinging hammer, and their thumb was pinched between the two pound hammer and the cam fitting. At ER, thumb nail was removed and one suture placed in nail bed. Small fracture at tip of thumb. EE released to restricted duty.
220261040017M13558EE was repairing a defective windshield wiper unit. EE saw motor linkage was disconnected. While reconnecting the linkage, the wiper motor unexpectedly activated, pinching their left ring finger between the linkage and the ball. Seen at clinic, diagnosed with fractures to the left ring fingertip, and wound closed with sutures. Released to modified duty.
220261050001M13708Outside hauler from Brix dropped off material at rap pile and left box up while pulling away, resulting in the box making contact with an overhead 240 powerline pulling it down. Power line fell on top of the hood of the Brix truck. Hauler stayed in the cab for more than 30 minutes until a qualified electrician from PGE removed the power and clear the scene. No injury.
220261050004M13708Employee reported having back pain to EE's supervisor. EE was about to grease EE's loader, but hadn't started yet, when EE began to feel pain. EE does not know what caused it. EE was not doing anything when the pain started. Axis care line was called. Nurse advised rest, OTC pain meds, & Ice therapy. Employee was sent home at 12:40 to rest and follow nurses care plan.
220261050006M11514While removing belts from a screen, a motor fell onto the left ring finger of the repairman, resulting in a 2cm laceration that required four stitches.
220261050007M10832Employee stepped into a pile of wet lime, resulting in burns to the leg and ankle. 
220261050008M12155Resubmitting new report due to glitch from previous report (E-Doc #3673211). An altercation between two employees. One employee was struck in the face multiple times and received closed fractures to the facial bones
220261050009M13317Employee was working on getting anvils out of the anvil ring of a VSI Crusher. EE was using a soft blow hammer to hit the anvils out of the ring when a piece of the harden steel broke off. The chipped piece of steel flew and pierced through EE's leather glove cutting the back of EE's right hand just above the ring finger knuckle.
220261050010M13438On 3/17/26, the employee stepped on a rock and overextended the arch of their right foot. The injury was initially believed to be minor, but the pain persisted and worsened. On 4/13/26, the employee was evaluated at a clinic and prescribed an orthopedic boot. X-rays were negative for fractures; an MRI has been ordered for further evaluation.
220261050011M12365Miner was setting up the ditch area to be cleaned and slipped on slurry material on the ground while putting up caution tape to warn about slippery conditions. Miner fell on the concrete floor impacting their left knee and right wrist. 
220261050012M12045The employee was walking from the lower lunchroom. Upon reaching the top of the stairway, the employee missed a step, resulting in a twisting injury to the right knee and reported hearing a popping sound.
220261050013M12616Employee cut a box open with a utility knife and placed the knife on top of the box.  When the employee pulled the box open with EE's left hand EE's left index finger make contact with the blade of the utility knife resulting in a cut to EE's left index finger.
220261050016M10461Cut left palm from changing cutting edge bolts
220261050017M12947EE was cleaning on top of the kiln silos. As they went to straighten up to lift the wheelbarrow they heard and felt a pop in their back and was in a lot of pain. Dr. released them with no restrictions, went to Ortho on 4/13/26 due to continued pain. Dr. gave restriction and EE is now off work.
220261050019M13758While an employee was attempting to charge a hydraulic valve, the fitting/connection failed on the lower hookup and there was a pressurized release of force. The employee sustained injuries to their left ear, where a small piece of metal became lodged and was removed with minimal force. The employee also injured their left hand, but no fracture was identified in the x-ray.
220261050020M12145Employee was replacing a poly liner and was using a drill to pilot a hole. Misplaced where their hand was on the opposite side and the drill made contact with their hand resulting in a cut that required 2 stitches.
220261050021M13187EE was walking in the crosswalk from the Employee Parking Lot towards the Main Office. When they got to the office sidewalk, they placed their left foot up on the sidewalk and was beginning to take a step up with their right foot when they lost balance and fell backwards striking their head on the crosswalk pavement.
220261050022M11744A fire consumed the the mine office trailer. Cause unknown. No one was present at the time of the fire. Fire department extinguished fire and notified owner of the property. 
220261050023M13398At the start of the shift employee was climbing access ladder of 992G FEL. Employee stated they felt right arm tingle and feel numb. They did not slip or try to catch themselves, was just climbing ladder normally. EE was taken to clinic, diagnosed w/ arm/shoulder strain, placed on restricted duty and referred to PT for eval and treatment
220261050024M10922Employee was walking through warehouse when their R knee strained due to pothole in walkway.
220261060002M10572Over extension RT Shoulder while performing maintenance  
220261060003M12997At the end of their shift an employee began descending the front boarding ladder. As employee was reaching the bottom step to get on the platform, they lost footing/overstepped the top rung for the breakaway ladder. This caused the employee to fall approximately 4.5 ft and land on their left elbow.
220261060004M13748Employee was walking the drill pad prior to doing EE's pre shift on the drill. it had snowed 3 inches that evening and EE stepped on the edge of a tire track that caused EE to slip/Trip and fall to EE's knee. when EE came down, EE came in contact with a sharp-edged rock on EE's shin just below the knee cap. we took EE to urgent care where they gave EE 4 Stiches. same day.
220261060005M11103Team member was tightening a set screw in a slightly bent position, stood up, and experienced back discomfort.
220261060006M12055Miner was replacing liners in a chute. EE was using a portable manual hydraulic ram to help position the liner plate. While positioning the plate the ram slipped and struck the miner in the upper left jaw.
220261060007M10862Employee slipped and fell while exiting EE's motor grader injuring EE's left clavicle.
220261060008M11444Employee performing non-routine repetitive physical labor experienced gradual discomfort in shoulder/elbow resulting in Rotator Cuff Tendonitis.
220261060013M11584foreman assisting with work on idler engine. Coupler came loose from shaft and idler motor struck foreman in head knocking off hard hat and causing laceration
220261060014M12115Jammed neck by striking a beam with hard hat on.  Did not request medical attention until 04/07/2026.  1st Dr appt was on 04/07/2026.  Received restrictions upon 04/07/2026 appointment. Diagnosis is neck strain.
220261060015M11774Uneven surface, took a step and twisted right knee.  Did not seek medical attention until 04/13/2026.  1st Appt was on 04/14/2026.  Received restrictions at appt on 04/14/2026. 
220261060016M11273Employee was disengaging #2 FM spotter clutch and felt a pop in their right shoulder, diagnosed with a sprain to right shoulder
220261060017M13177While employee was cutting the rubber insulation from around the wires in the motor junction box, their retractable utility knife cut through abrasion-resistant glove on left hand, resulting in a laceration of thumb. They immediately went back to the Electrical Shop to clean and perform basic first aid on the wound.
220261060018M13828Employee was removing a motor and reducer. Had motor rigged up with motor puller and chain and was helping lower the motor to the ground when the shaft slid out of the broken section of the auger jerking the employee forward. Declined initial treatment. Went to the clinic on April 10, 2026 due to shoulder pain and was diagnosed with a right shoulder strain and deltoid tendinitis.
220261060021M11173Employee alleges they were climbing down a ladder and lost balance and fell down last 3 steps on to their right knee.
220261070001M11524EE was taking door off coal hopper when they removed top bolt the bolt on the bottom of the door was loose causing the door to swing down onto the thumb
220261070003M10822EE received a hand laceration when a dozer belly pan slipped and pinched EE's hand
220261070004M10612Maintenance work being done when employee grabbed motor belt.
220261070005M13638EE had a knee injury that was exacerbated as EE was walking through the garage after putting oil canisters away in a conex box behind the garage.  EE felt a tweak in EE's left knee as EE stepped.   On Wednesday 4/8/26 at approx 1PM, this injury was reported to have happened at work, and that it originated while shoveling one month prior near the scalper screen.
220261070006M10572Employee was air lancing air slide and twisted EE's knee.
220261070010M10912removing a large clay ball from a grate using a pry bar the miner strained their lower back
220261070012M12476EE was tracking Conveyor belt, and saw an Idler not rotating. EE used their hands to try to break the Idler free, The roller starting rolling which resulted in them being pulled into the Idler. their left arm was pulled between the Idler and belt.
220261100005M13778Highland city started to fill the canal earlier than what was communicated. When the canal was filled (pressurized) the valve that feeds water to the plant was in an open position to prevent water from freezing over the winter months.  With the canal being pressurized and the valve in the open position, water started to flow into the pond causing the damn embankment to fail.
220261100007M12406EE was placing cutting stock on a pallet with the hoist & clamp: EE placed the pc. of stock on the pallet but misjudged where the pallet was, and dropped the pc on EE's finger, causing a fracture & laceration to EE's right hand ring finger.
220261100009M10682Miner was walking and stepped on a rock, spraining EE's right ankle.
220261100010M10572While performing rope NDT, rope met retirement criteria. 
220261100011M11053operator was working on the journal in the Rm when EE's hand became pinched causing a small Skin Avulsion
220261100013M12015Loader operator was dismounting. placed right leg on the ground and went to turn to the right. Right foot did not move resulting in the force going to the right knee. Doctors initial ruling is a sprain
220261100016M10532employee slipped on wet ground and sprain left ankle.
220261100020M12656Miner was cutting a piece off of a conveyor belt using a utility knife. Miner was cutting towards their body , knife slipped and made contact with right forearm causing a laceration. Laceration was approx. 1" long and several mm deep and required medical attention.
220261100022M11864EE was changing screens at the washplant and was cutting a piece of rubber using a utility knife. During the cutting motion the knife slipped past the rubber and stabbed the EEs thumb.  
220261100023M12656EE has been off work since 3/28/25. On 4/9/26 they contacted NGM to notify us they were diagnosed with an occupational disease, bronchiolitis. EE was seen by a doctor who confirmed the diagnosis of bronchiolitis. They kept the EE off work pending ongoing treatment.
220261100024M12125Employee was relocating a hose into position in the Mill area, and reaggravated an existing back injury. The employee further aggravated their back when attempting to loosen a gearbox nut using a crescent wrench.
220261100025M13748After a wiper blade came loose on the screen discharge conveyor belt, employee and 2 other coworkers were attempting to secure the wiper blade's pivot arm to the belt frame with a wire. During the process, the wire came loose, and employee's hand became pinched between the crusher's frame and the wiper blade's pivot arm, resulting in a cut to the palm of their right hand.
220261100026M10973while servicing a mixer truck the employee stated they twisted their knee and strained their back
220261100027M12927A roof fall occurred in the longwall tailgate that went above anchor point.  Ventilation was not interrupted, no miners were trapped, and no injuries occurred.  The area where the roof fall occurred is a bleeder and is not a working area but the roof fall did extend passed the anchor point. 
220261100028M12917During corrective maintenance on a conveyor belt system, the employee was aligning the belt and cleaning rollers. The conveyor remained energized and operating, with mechanical guards removed and improper tools in use. The employee's left forearm became caught between the belt and a roller.
220261100029M12686The employee was cutting steel using a carbon electrode. During the operation, the employee temporarily removed the face shield, allowing a particle generated by the cutting process to enter the left eye. The task was being performed under normal operating conditions.
220261100030M13127Employee had not returned phone calls for approximately 2 days so a well being check was called into the County Sheriffs Office as well as to a trusted member of the community. The community member found employee on the ground in a shack adjacent to employee's living area deceased from an apparent heart attack.
220261100031M13818While cleaning the floor in the SAG mil, employee attempted to throw a 5-inch grinding ball into an elevated ball bin. The ball came back down & struck employee's left middle finger as the were holding onto the lower part of the structure. Impact caught the finger between the grinding ball & the structure resulting in a laceration requiring stitches and a fracture of the finger.
220261100032M12856The incident occurred while employee was cutting 1/4" carbon steel using a metal saw. When the cut piece fell, the employee attempted to pick it up and was cut through a glove by the long burr, resulting in a laceration to the ring finger on their left hand that required six stitches.
220261110015M13408The Injured Person (IP) was cleaning out the Roto-packer and bent over to cut a partially empty 50 lbs bag to discard remaining contents, and as the IP bent over, EE felt a pop in EE's lower back (left), and the IP had to take a minute before standing up straight. IP reported the incident to the Lead Operator. IP was taken to Urgent Care.
220261110016M11454Employee was cutting a plate off a head box above screen when the metal bounced off catwalk and contacted EE's leg. Employee received 2 stitches.
220261110018M10361EE smacked EE's finger with a hammer
220261110019M11684The employee was lifting a wheelbarrow to dump contents into the hopper. The ring on EE's left ring finger got snagged and popped the finger, causing pain and swelling.
220261110020M13408Employee had placed the remote control atop the mobile stacker machine's engine compartment box to check stackers position. Employee left remote on box, went to make final adjustments with the remote, and when EE hit the down control, it smashed EE's left pointer finger between the frame and the remote. Stiches required to pointer finger.
220261110021M13117EE working on primary pit crusher when somewhere in the line of equipment was struck by lightning which resulted in the current flowing through the wrench EE was using on the equipment. The electrical current exited EE's arm. EE was knocked onto the ground. Emergency services called and EE was taken to the ER.
220261110022M11073EE was cutting a bushing to remove it when it exploded, lacerating and fracturing EE's right middle finger.
220261110023M13578An employee was operating a drill press in the maintenance shop when metal shavings became lodged in the equipment. The employee stopped the drill press and attempt to manually remove the obstruction, and a sharp metal shaving penetrated the glove and caused a laceration to the employee's left index finger. The employee received stitches for their injury.
220261110024M12055Employee was walking from bay 7 to bay 12 to help GR573 cutting edges, while walking across yard they stepped in a hole felt right knee pain. They became a lost time on 04/15/2026 due to right knee sprain.
220261110030M13317On 04/15/2026 management was notified by EE that they had struck right knee while exiting a Toyota Forklift. They further stated that this incident happened on 03/31/2026 at approximately 11:00am. EE has now been seen to have their knee drained due to swelling on 4/16/2026 and 4/20/2026. No lost time or restrictions at this time.
220261110033M12065The EE was in the bagger area stacking one load of 50lb bags on pallets. As they lifted their arm, they felt their right elbow go numb.  Later in the day the EE started to feel pain in their right shoulder.
220261110036M10341Stepped out of truck and hurt knee
220261110037M11894While attempting to remove a seized bearing from a shaft, the employee struck the bearing with a hammer. Upon impact, a chip from the bearing struck the employee under their safety glasses.
220261110038M12596Shop employee was attempting to remove a trailer tire from the front axel of a tanker truck with a sledge hammer. The sledge hammer bounced back and pinched the employees hand against the fender of the truck causing a 1/2" laceration that required 2 stiches. 
220261110039M11484A Mine Engineer was walking on a road in the pit and stepped on a loose rock that moved under foot causing a strain making it uncomfortable to walk.
220261120001M11203miner was shoveling and felt a pull in EE's stomach, reported and was seen later by a doctor and diagnosed with a hernia
220261120002M12115While Employee 1 held the spring-loaded latch in a raised position, the tire bar slipped as Employee 2 positioned the new roller, creating a pinch point that caught their left thumb between the roller and latch.
220261120003M11854Miners was installing drive belts on a crusher, when they got their little finger on left hand caught between shive and belt. This caused a fracture and a laceration requiring stitches.
220261130001M10702Cleaning up and lifting-moving conveyor rollers strain sprain low back
220261130002M11003While installing a driveshaft in haul truck it slipped from EE's hand and struck EE in the shoulder.
220261130003M10582Employee had a Reportable hearing loss for noise exposure 
220261130004M11664WHILE LOOSENING NUT ON 2 FM DOOR TO REPLACE THE GASKET THE DOOR WEDGED ITS SELF AGINST THE MILL. THE OPERATOR WHILE TRYING TO REPLACE THE DOOR EE'S HAND BECAME STUCK.
220261130005M13778Ee was inspecting the end of a parked Genco mantrip, when it rolled forward and Ee was caught between vehicle and tool cart.  Ee was seen at local ER and released to full duty.  The next day the Ee was experiencing some pain and was taken to local clinic.  Dr. advised Ee to stay home the next shift, and return on next regular shift after weekend with no further restrictions.
220261130006M11684Miner was pressing a pin into a dozer track. The press malfunctioned and the saddle tool of the press hit the miners right forearm resulting in a fracture of the Ulna. 
220261130007M11263Employee was cutting grating to take a measurement after hole was cut employee move grating step backward and stepped in hole.
220261130008M11945Employee was core drilling. The rig shifted slightly while drilling, which caused the barrel to catch the mud pan as it was being extracted. The mud pan struck the employee on the left knee.    
220261130009M13838While cleaning the clean air side of Silo 51 air slide, an employee found the slide choked and not flowing. EE used a short air lance to clear cement and restore flow. Cement blew back into EE's face, entering EE's right eye under EE's safety glasses. EE was sent to an eye doctor; no damage was found and antibiotic eye drops were prescribed. No lost time resulted. Returned to job.
220261130012M10512EE slipped on a face shield while exiting building.
220261130013M12345Employee was descending a 6' ladder.  When EE stepped on the ground, EE's knee gave out and EE fell to the ground.  Incident occurred on 3/17 but did not become reportable until 4/21 when employee was given a brace and PT was ordered.
220261130016M12546Employee was descending stairs near the ball mills when EE caught EE's foot on a step, EE fell backwards and landed on EE's foot/ankle. Later in the shift EE asked to be seen at the ER, diagnosed with an ankle sprain and taken off work. Currently ONGOING
220261130017M12416Mill Operations Employee was cleaning the discharge cylinder at the Lime Plant. When the valve on the hose was opened, compacted lime discharged back toward the Employee and went under the face shield and safety glasses, contacting the eyes.
220261130022M11283Employee was working to get an airslide to flow material when dust from above dropped down onto the employee and into their eye.
220261130024M13277While installing a guard cover on the #1 shaker motor, the cover dislodged pinching the miner's left hand. The miner pulled their hand from the pinch point revealing cuts and bruising to their pointer, middle, and ring fingers. Miner went to urgent care where the cuts were cleaned and glued shut. Miner then returned to shift.
220261130027M12446EE was assembling core shed table. Putting bolt and nut on, had left hand on table holding bolt. While pulling down on the table, felt sharp pain in left side of chest. Seen at clinic, diagnosed with a pectoralis strain, released to light duty.
220261130028M11734Mill Mechanic was moving a sensor into position for run operations and in the process pushed themselves up to move along the ring gear and felt a pop in their left shoulder.
220261130030M13508Employee experienced a seizure while making observations on the computer in the AA Lab room of the Merrill Crowe Facility. Another employee accompanying them noticed immediately and caught them bringing them safely to the floor where they laid EE on their side. EE just returned to work from medical leave from the same condition in November of 2025.
220261140001M11634The employee was hitting a steel tooth with a hammer when a piece of steel chipped off and hit EE in the left. ER X-Ray showed a piece of steel lodged in EE's leg.
220261140003M12406Miner was changing segments on loader (Cat #4-11 988F) bucket when EE placed EE's palm on the carriage bolt head and applied the impact gun to the nut to remove.  The bolt head spun and cut through the miner's glove and lacerated EE's hand.
220261140004M12275Miner was lifting a 2.5'' steel shaft (weighing between 100-150lbs). EE picked it up to slide it into the pulley that was hanging via EE's service truck crane, and when EE curled up to slide it in, EE's left arm/elbow gave out.
220261140006M12987Over the road driver was removing a tow rope from the mounted bracket on a loader. Employee began lifting the tow rope overhead when they felt a pop in their left shoulder, followed by immediate discomfort in that shoulder. Employee was evaluated and diagnosed with a strain to their left shoulder.
220261140007M10772Little giant ladder collapsed while employee was approx.  5 ft above surface.
220261140009M135287000-1 filed 7/23/25 for original event. mine has remained inaccessible since flood date. K order issued. Water levels in creek and pit have been highly variable over time. this rain event raised existing water levels.  Berms placed to prevent pit access. No mine entry since July 21, 2025.  0 injuries occurred. report filed to abate Citation 5118900 
220261170005M11123EE was climbing up a ladder to hit on a silo to see if it was empty, the ladder fell over as EE was going up it.
220261170006M12235Employee was kneeling on the ground, preparing to close bottom gate on railcar and heard EE's right knee pop.  EE was in pain and wanted to go to the Dr to be checked out.  EE is now waiting for an orthopedic Dr. to see EE.
220261170007M10862Employee alleges back was strained while pulling oil cart out from under a haul truck.
220261170008M10882While adjusting the telehandler forks EE pinched EE's finger, resulting in a laceration.
220261170011M13578 The loader operator observed smoke in the loader engine.  The IP discovered a minor fire, then extinguished the fire, called an emergency, the mine was evacuated, Mine Rescue team verified the fire was out, the IP was taken from refuge chamber to the surface, cleared medically from the onsite clinic, then released to return to work with no restrictions. 
220261170014M11123EE was dismounting last rung of ladder on a front-end loader and sustained a muscle strain in their right thigh.
220261170015M12656EE was installing 42" pipe when the wind blew into the pipe causing dust and debris to enter EE's left eye. Seen at eye doctor on 4/23, diagnosed with a foreign body in the eye which was removed and prescription eye drops given. Released to full duty on next shift.
220261170019M12055EE states something popped in left upper arm while working to rotate a crimper. EE reports mild discomfort in the area. On exam there is a notable bulge in the bicep muscle in the middle of the upper arm. 
220261170028M11834Employee was removing fluid coupling from 10 Aux drive. Fluid coupling slipped out from between the couplings and fell on employees hand. Employee received stiches and broken finger. 
220261180004M12816While operating a John Deere 315 Skid Steer to transfer cement powder out of the mill building as part of a cleaning task, an operator wearing steel-toed boots rested their feet outside the footwell with the bucket slightly raised. This resulted in injuries to the right big toe.  
220261180005M13838After haul truck operator backed up to primary crusher, crusher operator saw small fire near the passenger side front tire which grew quickly.  EE called for the driver to evacuate, and both left the area.  Driver reported no prior issues.  Due to extensive damage, source/cause of fire is unknown.  Believed to have started either in engine compartment or near front passenger tire.
220261180006M11123The operator was dismounting equipment using a ladder when they experienced pain and noted swelling in the knee.
220261180007M11504While backing up haul truck to shovel, employee had neck pain when the truck struck the shovel dipper which caused the contents to drop in truck bed. 
220261180009M12185IW lost EE's balance and fell when walking out of the employee break room and injured EE's ankle. EE was sent to the doctor for diagnosis and it was determined that EE has a sprain and cross-fracture of the right ankle
220261180010M13778The fire was called in when detected, through MSHA's Emergency hotline number on the morning of 01/13/2026. A 103(K) Order (No. 5056976) was issued for the electrical rooms affected by the fire, on 01/22/26. On 04/24/2026 A Denver office inspector was on-site for other purposes and mentioned a 7000-1 needed to be filed for the fire; this submittal is fulfilling that request.
220261180012M11333Employee used Brakleen to remove hydraulic oil from their hands; after doing so they took a smoke break causing burns to their hands.
220261180013M12365Employee was tracking plant then began changing screens. EE felt something in EE's left eye, flushed it out but it continued to bother EE. Supervisor took EE to Urgent Care where they flushed EE's eye and issued a prescription ointment.
220261180014M11313Employee was moving vacuum hose, and it got caught causing EE to fall. EE had pain in EE's right knee which worsened on 04/24/2026.
220261180016M10191Cleaning out chute.
220261180019M11213EE was accessing the back of EE's pickup truck, when EE felt a pop on the back of EE's leg. Muscle strain, 0% impairment.
220261180021M12215Employee was working in the lab when EE began feeling ill. EE was transported to the local emergency room by the site foreman, where EE was diagnosed with kidney stones. The condition was determined to be non-work-related
220261180027M12115Employee was changing shaker springs on Shaker C in Plant. While installing the new spring, the shaker deck dropped and pinched left middle finger resulting a laceration that required 13 stitches to close wound.
220261180029M11053Employee was operating a forklift steering wheel with EE's left hand when EE felt a pop in EE's shoulder.
220261180030M13327Employee was removing spray bar clamps from an old wash screen. After removing the hardware, the U-bolt was stuck in position around the bar, Employee used a 10" pry bar to free the clamp. While pulling downward the pry bar slipped and pinched the palm side tip of EE's left ring finger, causing a laceration requiring two stitches.
220261190002M11143Cutting 4 inch water hose with multi tool,  tool slipped and cut hand through glove. Leaving roughly a 1 inch cut.
220261190003M11975Contract employee was trying to set a poly line in a stand. When EE was trying to adjust the poly pipe EE pulled pipe over stand. It came off stand slide across manlift rail and hit EE in the ribs.
220261190004M11353EE was working underneath the cone discharge, completing housekeeping activities where EE wrenched or tweaked EE's back causing injury.
220261190009M13568EE was driving EE's work truck on top of the dam, EE exited the vehicle onto the berm when the ground beneath EE gave way, causing EE to fall approximately 10 feet down the dam embankment. EE was able to climb back up the dam independently, re-enter EE's work truck, and drive to a location where Emergency Response Team (ERT) assistance could be obtained.
220261190010M12095Employee was using a bar to dig out rock that was stuck in a cone crusher.  When the rock broke, the bar hit the mantle, pushing the bar back and turning it in the employee's hand which cut employees fingers. 
220261200001M10612EE was cutting a belt and the knife slipped cutting EE's knee
220261200003M11413EE slipped on steps where limestone dust had accumulated.  While reaching for handrail to prevent falling, EE dislocated EE's right shoulder.
220261200004M11133Removing motor in float cell, motor shifted and struck back of hand resulting in laceration requiring 4 stitches.
220261200005M12175Employee was attempting to dislodge a stone in a jaw crusher with a long steel rod. As EE used downward pressure to strike the stone, EE struck EE's right hand on the edge of a steel plate that surrounded the crusher.
220261200006M11043Employee injured EE's ankle after mis stepping and jumping to the ground while exiting an excavator cab.
220261200007M12275While EE was walking up 89-817/818 belt line tube dust hit employee's hard hat, and as the employee looked up, dust entered the EE's left eye. Co-workers assisted the EE with eyewash, then the EE was taken to medical treatment.
220261200010M11333Sliding two pieces of plastic pipe together and caught EE's left hand/wrist and now it is sore and hard to move.  Stiff and bruising.
220261200013M11574Moving the Barge that the pump sits on, pushing the barge I felt a pop in my right bicep muscle. Arm is showing signs bicep being pulled up towards shoulder.
220261200014M13277Employee was performing a team lift with another EE to set a 100lb. LP bottle from the back of a service. Due to a miscommunication between employees, injured employee had EE's fingers under the bottle when it was set down on the bumper.-smashed the tips of the middle and ring finger of left hand - resulted in restricted duty
220261200016M10902Driver was returning empty to the pit when EE ran up a berm and laid the cab of truck over
220261200017M11183EE was operating the WA 500 loader and ran into a concrete block, causing injury to EE's right shoulder and chip tooth
220261200023M12826On 04/09/26, an employee performing customer truck hatch opening duties felt discomfort on the right side of their neck and hand but could not determine at which time or area EE may have strained it. Employee sought additional treatment on 4/16/26 and was placed on restricted duty.
220261210001M11243While applying belt dressing to a head pulley EE's hand was caught in the head pulley and caused the loss of EE's left hand.
220261210002M12005Employee was adjusting a sand gate on the float cells. To adjust the gate, you pull on a handle. EE leaned over the handle and pulled the handle hitting self in the forehead. Resulted in two stitches.
220261210004M13347Operator informed their supervisor before start of shift that they were experience back discomfort. After operating a haul truck they informed their supervisor they needed to leave and seek medical attention. Preliminary evaluation indicated potential spine injury. Secondary evaluation diagnosed a sprained/strained musculoskeletal. 
220261210009M13097Employee was inspecting a bin hole that was about to be patched when material from above fell onto to employee and in between their safety glasses and face. The employee reported irritation in their eye and sought medical treatment. They were diagnosed with a scratched cornea and placed on restricted duties.
220261210010M11413EE was repairing a crane. EE jumped off the crane, approximately 18", onto the ground and however EE landed caused burning pain in EE's knee.
220261210011M11694Employee inspecting a hose stood up in a confined space and struck their hard hat on a frame causing their jaw to snap shut and chip a tooth with a minor gum laceration.
220261210012M13127A contractor employee, (NBS Industrial Services LLC - MSHA ID #C6519), was performing clean up duties. The employee was pushing a shovel when EE's hand began to burn and EE was unable to fully move EE's right wrist. The employee was taken to the ER where EE was examined and told to follow up with an orthopedic.
220261210013M12546Worker was welding in shop. They removed their welding hood after completing a weld and the slag popped and sent material into their eye. The material had to be removed by medical professionals and they were prescribed antibiotic and steroidal eye drops.
220261210014M11143Employee suffered soft tissue injuries to the foot as a result of foot becoming rolled over by passenger vehicle. 
220261210015M11474The employee was stepping off a Pelican street sweeper, went to step down noticed a rock and attempted to pull self back up and strained their arm.
220261210017M12345EE was operating the shuttle wagon while loading cement rail cars.  EE had EE's head out the window, watching for signals from the ground man.  A gust of wind, blew some debris up and under EE's safety glasses and into EE's right eye.
220261210018M10692Stepped off the excavator onto uneven ground and twisted right ankle.
220261210019M11614Miner was cutting a piece of belting off of a roll when the knife slipped and the Miner cut EE's left hand in two places. The laceration resulted in two sutures.
220261210020M12205Employee was walking crouched down in a low overhead clearance area and felt a pop in EE's lower back, followed by pain. EE was taken to the clinic, given work restrictions the company is accommodating. CURRENTLY ONGOING
220261210021M10672Miner was shoveling wet material at the entrance to the Lower Mill.
220261210022M12656Employee reported that dust entered under their safety glasses flushed their eyes using an eyewash bottles. The employee declined medical evaluation at the clinic at the time. With continuing issues, the employee was later evaluated and given prescription eyedrops.
220261210023M13047At -12:45 PM, EE cleaned a return idler while a conveyor was running, without supervisor approval. Despite a coworker's warning, EE continued and was pulled into the belt. Coworkers stopped the conveyor and freed EE. EE suffered minor abrasions. Cause: working on moving equipment without lockout/tagout.
220261210024M13478The IP went to work night shift 04/01/2026 while working at around 4:30 in the morning EE was straining with a pry bar to pull a replacement hydraulic hose into place, the IP felt a pop in EE's right shoulder. Then the IP called supervision and went to the clinic to be assessed, then sent to Fairbanks hospital, MRI determined surgery was needed.
220261210025M11103Bilateral pain in hands & wrists; experienced initial pain while hand stacking 10kg bags at the Celpure plant.
220261240001M10361Employee got finger pinched in belt.
220261240004M12245It is believed that the customer truck driver fell from EE's trailer to the ground while stepping from the trailer to the safe rack. The fall resulted in multiple injuries requiring medical attention and a loss of work days.
220261240008M12335EE was moving from the shaft of the screw to the floor of the screw near the top of the machine.  When stepping down EE hit EE's knee on the corner of the pea gravel chute that run into the screw. Condition is still under evaluation.
220261240009M11383The brake sensor on the Phoist malfunctioned. Upon investigation, we found that a wire was loose/disconnected and needed to be corrected. 
220261240013M10792EE felt pain in shoulder and has been diagnopsed with a degenerative condition.
220261240016M10612EE struck by screen panel resulting in contusion to left foot
220261240018M12375Ee lost footing descending ladder, fell, caught self with left arm. Originally released to full duty, but on follow-up on 4/30, concern for rotator cuff tear resulted in restricted duty and referral to ortho. Scheduled for ortho on 5/26.
220261240019M13237EE was cutting a steel manifold from the side of 10SC001. While getting to the bottom of cutting the brackets off, the manifold broke loose unexpectedly and dropped 3 feet to the catwalk. The EE's foot got tangled in the manifold's valves and dragged EE down the catwalk. This resulted in a twisting of the EE's left ankle.
220261240020M12225Miner was walking up a stairway using the handrails and cut their left ring finger on a piece of sheet metal that was protruding out from the back of shelving that is stored beside the stairs. Miner received four stiches. 
220261240021M11884EE was coming down from the loader when EE thought EE was on the last step of the ladder and fell on EE's right side injuring EE's right wrist. Weather conditions were very windy that day.
220261240025M13197A miner was lifting bearing parts onto a pallet to be removed from the area when they felt discomfort in their left shoulder. The miner did not report the injury to their supervisor until after they went to see a doctor on 04/24/2026. The miner was diagnosed with a left shoulder strain and received work restrictions. 
220261240027M13648Two vehicles traveling on a one lane road in opposite directions did not hear each other on the radio and made contact at a blind corner.  The employee was already planning on getting knee replacement surgery sometime this fall but this incident made the decision EE was going to do it sooner.  We did not know this was going to be a work comp claim until 4/29/26.
220261240029M12426Washing the lube truck and went to climb the step ladder in the back of the truck and calf muscle popped.  Muscle strain. It was unknown EE was going to miss time from work until 4/28/26 and wasn't scheduled to come back to work until 4/30/26
220261250001M13287While exiting a water truck, the employee missed the second rung from the top of the ladder and fell approximately three feet to the ground. During the fall, the employee attempted to regain balance by grabbing the door, which caused EE's body to shift to the right. Upon impact, EE landed on EE's right elbow and reported pain.
220261250004M11103Employee was using a dead blow hammer to clear salt on the the 3rd screen bank and hit EE's left pinky finger.
220261250005M13708Employee was in the process of removing the cutting edge bolts from the bottom of a John Deere 324G skid steer, with leather Tillman gloves using a Milwaukee half inch impact. While removing the second bolt it spun, and caused a burr on the bolt to cut EE's ring and middle fingers on the bottom of EE's right hand. Employee was taken to clinic and received 14 stitches.
220261250007M12957Employee pulled a 6 inch hose full of water to a location for it to drain. While pulling the 6 inch hose employee felt the initial pain in right elbow. Employee connected the 6 inch hose to the water truck after draining opened the valves from the Big Water Tank and pain in right arm continued.
220261250008M13838EE was exiting the 980loader in the shop,maintaining 3-points of contact,EE's L foot was on the ground & EEs R foot got stuck in the bottom step.This threw the EE off balance and EE fell backwards and EEs L side landed on a pallet with a cylinder on it.The pallet was approx 10'away from the loader.EE broke 4 ribs on EEs L side from the fall onto the pallet with the cylinder on it.
220261250009M11303Employee was moving the slurry pump, and the zip tie broke on discharge hose causing it to fall and the clamp hit EE's right foot.
220261250010M11433Employee and owner were performing maintenance on screen plant. Employee was on screen and jumped down onto lower screen breaking both ankles. 
220261250013M11764Employee picked up sample bag and tossed it into the bed of the light vehicle. When turning to get into the light vehicle felt a sharp pain pain in low back down to right hip. 
220261250015M10612Employee struck knee on a pipe bracket while moving a ladder.
220261250018M13748Two maintenance mechanics entrapped in the Mill Bldg. elevator after the car stalled between the 2nd & 3rd floor landings. Both employees are uninjured and remain in constant communication with site personnel. Otis Elevator has been notified, a technician was dispatched to the site to safely extract the employees and evaluate the equipment.  MSHA was notified immediately.
220261250020M12335The longwall operators were cutting high in the tailgate causing the shear to cut out roof support (bolts). This roof fall occurred in the tailgate (bleeder) no employees were trapped, injured, and air was not disrupted by the event.
220261250021M10171Tripped on a rock
220261250022M11524While miner was exiting/stepping down out of a storage trailer EE's ankle turned and simultaneously EE's knee gave out causing EE to fall to the ground.
220261250023M10792The employee slipped on the stairs and had a compression fracture in veribrate 
220261250025M12145Employee was picking up blanks in the cell rack and removing wooden blocks when employee descended from platform stepping onto wooden block on floor causing employee to fall same level and rolling EE's right ankle.
220261250026M13267Employee grinding iron while wearing welding hood and safety glasses. Spark struck ground, rebounded under hood and glasses, and entered left eye. Evaluated by physician: shallow metallic foreign body in left cornea. Topical anesthetic applied; foreign body removed without tissue removal. No pain or residual issues reported.
220261250027M10211Slip and fall on ice.
220261250028M11544EE was looking for part in warehouse when second EE stepped up on rack to look causing it to tilt and fall, EE did not react in time and finger was caught
220261250029M10852Employee was removing the bucket on the skid steer when it fell landing on EE's foot.
220261250030M13428Haul truck operator was involved in a tip-over incident while moving material, resulting in the truck overturning onto the driver's side. Following the incident, the employee received a medical evaluation after beginning to experience blurred vision and nausea. The employee was diagnosed with a neck muscle strain and a lumbar muscle strain.
220261260004M12566The employee was working on the cone combo under belt at the dry plant and putting flexcos on to patch a hole. While moving to another area on the under belt to patch it, the employee caught their right leg on a flexco causing a laceration below the knee. 
220261260005M11884Employee reached into bag machine to remove jam when the belt grabbed EE's glove and pulled it into the belt pulley. The injury occurred when the employee reacted by pulling EE's hand out.
220261260007M11965Employee was drilling with trim drill and manually removing and handling 14-foot drill steel following drilling operation. Employee returned to work with restrictions, no lost time, no lost wages.
220261260008M13478A Shovel/Drill employee was removing snubber pins to perform a re-shim of the snubber. While using a digging bar to drive out the pins, the pin suddenly released, causing the snubber to drop. This resulted in the employee's left pinky finger being pinched between the dipper bore and the digging bar. Employee was given restrictions on 4/25/2026. 
220261260011M10752Incident unknown. EE explained EE is sore in shoulders and shoulder blades.
220261260012M13548On April 13, 2026, employee experienced a right elbow strain disconnecting a loader shroud. Employee attributed it to an awkward position while using an impact gun. Reported on April 16, 2026, received an initial first aid assessment . Due to ongoing pain, a medical evaluation on April 28, 2026, diagnosed medial epicondylitis, leading to modified duty.
220261260015M11794EE climbed into the chute of the packer system to lube the roller without locking out/tagging out packer.  EE's left hand was caught between the conveyor and the closest roller.  
220261260016M10461Employee was cleaning cat walk around Jaw area
220261260017M126664/28-First Aid EE was tightening the bolts on the 3" inch flange pump when heard a pop sounded followed by a very strong & painful cramping in the right bicep. Followed by throbbing pain and reddish bruising forming on the right bicep. 5/5 -Went recordable due to PT
220261260018M11564The employee had CKD dust in EE's boots, which caused a chemical burn. Because EE wasn't able to wear boots, EE had restrictions on work starting on Apr 14.
220261260019M13668At 10:37 pm the chippy hoist experienced a power surge that tripped the main breaker. The hoist operator is fairly new and wasn't confident in resetting the breaker, so EE called electricians. While they were in travel, we stood down the crews and prepared to hoist them to 3700. The electricians arrived, reset the breaker and the hoist was back to duty at 11:30pm.
220261260022M11504Employee started Light vehicle, EE had a medical episode and accelerated through several berms coming to rest on the bottom of a reclaimed waste dump.
220261260024M11113 An employee was inspecting a vehicle at the main gate when they were stung/bite by an insect on the right ear.
220261270002M13588Employee was getting sloped plant area fixing washouts and ready for hydroseeding. Employee backed up to far to an area that had a weathered berm and slid off backwards when the wet ground shifted causing the dozer to fall off an approx 7' drop. Dozer landed on the back cab and remained in vertical position. Employee suffered compressed vertebrae fracture 
220261270006M12646Employee was riding up in the elevator when it stopped on the 4th floor. The doors would not open. The elevator company was notified, and in the meantime other employees were able to eventually get the doors opened from the outside and the employee got out safely.
220261270007M11233blaster was loading a shot and stepped in a drill hole causing EE to lacerate EE's shin, the laceration required 3 stitches
220261270008M12105Normal shoveling task, it was EE's first day and EE was being trained on task. EE's left elbow popped and EE lost strength in EE's arm and hand. Supervisor took employee to the urgent care to have it looked at.
220261270009M13478The operator of haul truck claimed that while dumping out the front end of the truck lifted up and slammed back down. They stated at the time of incident they did not experience discomfort. However, as the shift progressed, they began to experience increasing discomfort to their lower back. The operator went on leave for the injury on 1/20/2026.
220261270010M12957A miner was working from a ladder while applying a patch to a screener feed box. While reaching, the ladder slid, causing the miner to fall onto the ladder. The miner sustained a laceration to the right knee and a fracture of the right patella. The miner was prescribed medication and lost time.
220261280001M12636Employee was loosening bolts for a loader bucket cutting edge with an air impact, and grabbed the bolt head with EE's bare hand. The bolt spun in EE's hand, cutting open two of EE's fingers on EE's left hand. Employee was taken to the emergency room for stitches.
220261280002M11484Skoria was placed in the employee parking lot around 4:30am. Pit operator employee slipped in the parking lot getting EE's work bag out of EE's car.
220261280004M13628Employee was opening a metal box of new welding rods and went to reposition the box and their body to fully remove the lid. While doing so the box tipped over and as it was tipping employee caught it. The box weighs 50 pounds, and the lid is thin sharp metal, the edge of the lid made contact with employees left wrist while being caught and caused a laceration.
220261280008M11113Miner was opening container of grease and sliced middle finger on left hand.  Results in stitches, no loss time
220261280010M11383While moving an electric motor to a cart, the motor shift, smashing the tip of the IW's left thumb resulting in a abrasion and a fracture.
220261280011M12125On 4/17/26 an employee was breaking up core samples with a hammer when EE felt discomfort in EE's right shoulder and hand. Employee sought additional treatment and was placed on restricted duty beginning 4/27/26.
220261280013M11904Employee was climbing the stairs and as EE attempted to step up EE's foot slipped causing EE's weight to be completely supported by EE's arms resulting in EE dislocating EE's right shoulder.
220261310001M13468EE was assisting with screen replacement on the finish screener. EE stepped onto a spring-support bracket adjacent to the catwalk that resembled a step but was not designed for access, placing EE above guardrail protection. While repositioning, EE lost balance, fell about 10-12 feet, struck a service truck, then the ground, fracturing EE's leg.
220261310007M11935Ee walking downhill to EE's equipment when EE's knee dislocated, causing EE to fall to the ground. Seen at Golden Valley, diagnosed with strains to knee and back, and released to modified duty.
220261310008M13708A TDF attendant was unstacking tires. The EE pulled a tire off the stack, causing dust to hit EE's face, and enter EE's left eye causing irritation. The EE wore safety glasses, first aid was administered EE reported discomfort on 5/7 and EE went to and urgent care facility. No foreign body was discovered, EE was given no restrictions. The doctor prescribed antibiotic.
220261310009M13368Contractor EE was repairing a ripper tooth from a D10 Dozer.  EE hit the ripper tooth with a hammer a couple of times to get it in place for the retaining pin.  A piece of metal sheared off of the ripper and embedded into the EE's left arm.  EE eventually went to the ER for treatment.  It was removed and EE was prescribed antibiotics.
220261310010M10662While removing a bearing, employee struck self in face with hammer
220261310011M13708On nightshift of 04-24-2026, IP experienced right forearm feeling tight, reported for work the next shift, after loading 2 rounds the IP reported loss of mobility, performed other normal duties the rest of the shift, reported to onsite clinic 4/26/26 AM, on site treatment was slow, sent off site for diagnostics, which led to restricted duty on site beginning 5/5/2026.
220261310012M13347The employee was tasked with helping fill water tank. EE was found about 30 minutes later laying face down saying EE was hurt and needed help. At this point it appears that the weight of the trailer shifted off the cribbing under the landing gears and caused the trailer to overturn, either striking against or rolling over the miner.
220261310014M12175Contractor driver from TRANS CEMENT LLC completed the activity of closing the truck hatch and proceeded to enter the truck cab while keeping the door open. While inside the cab the driver fell backwards to the ground.
220261310015M11925While performing maintenance on the secondary mill the miner was using the hammer and during a swing felt a pinch and/or sting in EE's left bicep. The miner suffered a tear in EE's left bicep.
220261310016M10692EE placing tool bag in back of truck strained upper left back muscle.
220261320001M11935While discarding obsolete hydraulic pipe into metal skip, set one end down to grab other end of hydraulic pipe with both hands and caught right hand pinky finger between pipe and edge of skip. 
220261320002M10792Employee jumped off the drive frame of the conveyor, and fell on EE's left hip.
220261320003M10882Operatpor was fueling truck and tripped on fuel hose while replacing the hose in holder.
220261320009M11013Welding on jaw of crusher, after shift realized scratching in eye from foreign object due to welding.
220261320010M11564Right thumb was pinched between square hub bolt head and access removal slot wall in the cage mill housing, resulting in a laceration that required stiches.
220261320011M12816Ee reports stepping up on top of berm while doing an inspection. EE reports feeling pop to the bottom of right foot. Seen at Golden Valley, negative for swelling, redness, numbness, tingling. Xrays taken, but no results reported. Released to modified duty and referred to podiatry.
220261320013M11524A rock rolling around on the crusher return belt came off and struck the employee in the foot. Causing a break to the 2nd metatarsal of the right foot. 
220261320014M11804Employee felt a pop in left knee when mounting water truck. Employee has had a previous knee injury. Not determined until May 6th that this was a new injury and not a reoccurrence.
220261320015M11303Employee was walking from the dryer area to the main office when EE tripped over a constructed metal ledge leaving the dryer area.
220261320016M10331Hearing -standard threshold shift
220261320017M11664EE was walking fence line when EE stepped on a hard object that caused a popping sound and sensation in EE's left foot temp 79d mostly sunny area was clean of debris.
220261320018M13337Employee was climbing down the steps of a blast hole drill, when the employees first foot touched the ground EE let go of the handholds with EE's hands, at this moment the other foot got caught on the last rung of the steps causing EE to fall backward onto the ground. The employee had soreness and stiffness in the lower right back.
220261320020M12436The Coeur hoist went down due to a broken secondary connector. The electrician found the problem and replace it. These are new connectors and don't appear to hold up as well. Hoist was back up at 8:50 am. The connectors will be checked weekly.
220261320021M11985The operator of HT487 was hauling loads out of the 98 shovel for a majority of the night. The operator believed the floor of the pit was rough and while spotting experienced some neck and back pain.
220261320023M13849A Mill Diagnostic mechanic was guiding a coupling guard into position using crane assistance. The mechanic attempted to lift the bottom edge of the guard to maneuver it over the adjustment bolt. The guard was set back down, the mechanic's left hand was still positioned underneath, resulting in the left index finger being caught and pinched between the adjustment bolt and the guard.
220261320024M11935Employee was holding a rope to align a new conveyor belt. EE wrapped the rope around EE's left hand and as the belt was being positioned EE received a rope cut that needed at least 10 stitches.
220261320025M11774Employee was working to balance a screen and felt a pain in EE's back. Upon examination, EE was put on restricted duty for two shifts, returning without restrictions on May 6th.
220261320027M11634EE was adjusting the headlamp on EE's hard. When doing this EE was cutting a zip tie that held the headlamp strap on EE's hat. EE punctured EE's left index finger.
220261330003M12085EE clocked in at 10:35 am. EE walked to the haul truck. Put both hands on railings and placed right foot on the first step to climb stairs to enter haul truck. EE heard a pop and had left ankle pain,10:49 am.
220261330004M12265An employee pulled an air filter out of a piece of equipment to shake the dust out. When the employee was stamping the filter on the ground, EE cut EE's inner hand on a small piece of broken metal on the framing of the filter.
220261330005M12766Employee as working on replacing the #1 drive motor for the screen.  While torquing the bolt, the motor pivoted, causing EE's left hand to be caught between motor mount and pivot point; resulting in a fracture to EE's left thumb. EE went to clinic and EE's thumb was splinted.
220261330007M11163The aero phine bulk storage tote was leaking. The employee checked the tote level and slipped, breaking both ankles.
220261330008M10882Contusion to right hand fingers while putting a boom cylinder into the boom of a scaler.
220261330009M11123Miner was stepping out of the Haul Truck after end of shift and stepped on a rock and heard EE's left ankle pop.
220261330010M13778An employee was in the Raw Mill attempting to remove reject stone, when a raccoon ran under the skid steer they were operating. The employee stopped the skid steer and the raccoon ran into the corner and got trapped under a beam. The employee attempted to rescue the raccoon, but was bit in their right index finger. Rabies exposure protocol was followed at the emergency room.
220261330011M13418Haul truck operator hit a couple of potholes and tensed and applied brakes while traveling haul road. Soon after the operator saw a truck sliding towards them, so they tensed up and applied brakes again. In tensing up, the operator felt pain in left shoulder. The operator ran two more loads and, on the way, to tie down, the pain increased.
220261330013M13658Mill utility employee was jackhammering in Silo 4 when the jackhammer became stuck. While attempting to free it, the jackhammer suddenly released and dropped, pinching the employee's right pinky between the jackhammer and a grizzly bar. The employee received medical treatment- reinserted fingernail and stitched it to hold in place. Was told to keep dry and clean.
220261330014M12235Employee fell into a chute and onto the material below when the hatch door EE was leaning against unexpectedly opened.  The hatch opened because the winch holding it in a semi closed position broke from its anchorage point.
220261330015M10471EE got burnt while cutting a bolt with a torch.
220261340005M12476EE was taking a break in a job trailer. While removing EE's safety glasses a small dust particle entered EE's left eye. EE notified us on 4/27/26 that EE sought med. treatment on 4/23/26. Dx w/Corneal Abrasion & Given Rx. Reporting within 10 days.
220261340009M11313Had EE's finger accidentally struck with a chipping hammer that another employee was using. Causing a cut 7 stitches, and bruising.
220261340011M11203Employee felt a groin strain while cleaning but delayed reporting it until the end of the shift when the pain persisted.
220261340013M13788Maintenance began 4/24/2026. Grinding on 4/30/2026, with fire watch in place, caused smoldering in combustible material near the work area, which was extinguished. Additional grinding occurred 5/1/2026. On 5/2/2026, a fire was reported on the plant roof at 6:05 AM and extinguished within one hour. Sections of the metal roof were cut to access hot spots, requiring replacement.
220261340014M12456Employee was using a pipe wrench to disassemble a water pump. EE was pulling down on the wrench from overhead when the jaws slipped causing the handle to hit EE in the forehead. Employee sustained a laceration to the forehead requiring stitches.
220261340018M10602Pushing Heavy load down the rail and injured right shoulder 
220261340019M10552Stone broke from breaker and smashed right index finger
220261340021M12155Miner was helping to change a gearbox on a screw conveyor that was difficult to remove. During this process a wrench they were using slipped and their hand hit a bolt on the equipment causing swelling and bruising. 
220261340024M11183While walking towards the jaw feeder, the employee grabbed the frame to brace self and cut EE's finger on a sharp edge
220261340028M13578Employee was walking towards the centerline during shift change using the designated path to the ladder. As they were walking towards the ladder the employee noticed that the pathway sloughed causing the employees left leg to sink up to the knee. This position caused the employees ankle to experience discomfort. The employee went restricted duty 5/5/2026.
220261340030M13548At 13:00, Haul Truck 474 was being loaded by Shovel 71. During third loading pass, a large rock was loaded into the bed of the haul truck. Upon impact, the haul truck operator reported feeling pain in their right shoulder. The operator advised that the shoulder pain increased in severity. The operator then contacted the facilitator to report the issue.
220261340032M13638Ee reported to NGM on 5/4/26 that on 4/3/26 ee was working 'in EE's columns' when a contractor and crew started hydro blasting above EE, causing debris to fall onto EE. EE reports that EE and a coworker yelled and went to the control room. Injury not reported to NGM until 5/4/26. No signs of injury to ee. Site cannot confirm incident occurred as reported by ee.
220261350003M10782Employee was carrying a printer down a set of stairs when EE slipped and fell.
220261350004M11624EE was replacing tram-cylinder on HP4 cone and got EE's thumb pinched between the cylinder and cone, resulting in laceration/partial amputation of the left thumb.
220261350006M11534Employees finger was caught between a sliding section of angle iron and a fixed item on the plant.  This resulted in a 1" cut and a fractured finger tip.
220261380001M11043Employee was moving rail cars around when EE rubbed EE's right eye causing something to get in EE's eye.
220261380002M11313Employee was kneeling to tighten bolts down on #2 dust valve (Calcination), upon standing EE felt something pop in EE's right knee.
220261380005M13778An EE was in the process of cutting a vertical wall cut using a Sky stone wire saw. The saw had been running at normal startup amps. During this time the employee walked behind the saw at the exact time the diamond wire failed and struck the employee on EE's right leg. Causing a laceration to the mid thigh. After physician consultation amputation near the knee was completed.
220261380006M11985Employee was using a utility knife to cut nylon straps holding roof bolts. Knife jumped while cutting a strap and cut EE's left leg above the shin bone. Employee received sutures to close the wound.
220261380008M11403Personal Health Issue not due to any chemical or physical factor from the mine. Only one person affected by this personal medical condition.
220261380011M11464Employee was getting off the bus at the Underground to report for pre-shift lineout. Upon exiting the bus, the employee twisted their right ankle.
220261380014M10772Coworker mis-stepped while climbing a water truck, slipped and cut EE's face.
220261380019M13718Employees noticed the round door for the dust collector was not sealed.  Since they could not close the door properly, the control room was called to shut down the fan and close it properly.   An EE was standing in front of the dust collector door when the fan was shut down.  Immediately, positive air pressure built up and shot the door out, hitting the EE on the face.
220261380020M11714Employee, a deckhand, was pulling a cable when EE strained a muscle in EE's lower back. Employee was examined and given a shot of muscle relaxer and prescribed medication.
220261380021M13207Employee had a hearing evaluation at Gila Health Resources on 5/7/2026 in follow up to concerns noted at EE's annual medical monitoring exam. Diagnosis: Left ear: hearing loss and STS despite wearing PPE for hearing. "Last scheduled work date before evaluation 5/6/2026 at 4:56 AM. Released to work with no restrictions.
220261380023M12185Employee was on the lowest step of a 4 foot step ladder to work on a F250 and stepped down twisting EE's right ankle on level ground causing a sprained ankle requiring a day of rest and no climbing ladders for 2 weeks.
220261390001M12666Employee was working on a belt, was holding on to a piece of Angle iron, the angle iron came loose, and the employee fell approx. 6 feet, employee suffered a small cut on EE's right forearm and was taken to the Urgent care. Employee was returned to duty same morning
220261390002M12526Service Cage Damage. Upper brattice door was damaged while transporting materials down the shaft causing the brattice doors to interfere with the use of the cage. The brattice doors were repaired and the cage was put back into operation later that day.
220261390004M12035A fall of ground occurred in the FED2352 level on May 13th, 2026. The fall of ground happened between shifts and was discovered by the ore control geologist team. Approximately 200 tons of material fell.
220261390007M13768Walking under a coal belt looking down due to ground been slippery from rain, EE hit EE's head on a conduit bracket and fell onto EE's back. Incident was reported to supervisor and miner said EE was feeling well. Next day shift EE reported that EE's neck was sore. EE was taken to urgent care for evaluation. The CT scan came out clean, and EE was diagnosed with a concussion.
220261390013M13788A miner performing water blasting activities in the preheater tower riser area when handling the water lance and when the water supply valve was opened got a kickback force causing the gun section of the lance to strike on EE's right ear, knocking EE to the floor. EE was transported to the hospital, where EE received eleven stiches in the ear and was treated for a concussion.
220261390015M11484While using a one-handed reciprocating saw, the blade hopped out of the rubber liner that was being cut and punctured a maintenance employee's hand.
220261390016M11253Employee was assisting with 518 hoist rope change out. While pushing on prybar to push the rope employee strained EE's L arm.
220261390017M12716Employee was jack hammering during clean up and felt a piece of material or dust fall in EE's eye. Immediately washed-out eye but swelled up overnight and following morning took EE to the clinic to be seen and employee had a scratch to EE's eye. "Abrasion of left cornea"
220261390018M13708Employee was performing housekeeping on a spill in an open tunnel when coworkers observed pale, heavy sweating and abnormal behavior within 15 to 20 minutes. Supervisor was notified and then EHS manager was called. Manager rushed the employee to the ER nearest to plant job site as employee was showing seizure like symptoms, the cause was determined to be dehydration. 
220261390019M10983manually spinning pulley with V belt and got right little finger caught between pulley and v belt.
220261390020M13037Miner was conducting EE's plant walk facing the sand screw, which is a noisy area due to the shaker decks above, EE stated EE heard the skid steer operating, but when EE turned to EE's left to see where it was the skid steer knocked EE off EE's feet and into the bucket, causing shin and elbow injuries.
220261390022M13137Somewhere between 12 and 1230, an EE asked EE to clean up the catwalk on the screen deck. EE was performing EE's normal work at a normal pace.  While other EE was tramming the excavator, they noticed EE in distress and responded.  EE went into cardiac arrest, 911 was called, CPR started, but EE did not recover.
220261400002M11073While operating hoist in automatic mode, the hoist stopped and the operator couldn't get the hoist to move.
220261400004M11253pushing material with a rubber tire dozer was backing up and ran over a rock causing machine to bounce and cause back strain.
220261400007M12556Employee was replacing the cutting edge of a loader when the carriage bolt dropped down from its mounting slot, causing the bolt to spin and cut through EE's glove, causing a quarter inch deep laceration, about 2 inches long, in the palm of EE's left hand
220261400012M11143While lifting a panel (guard) on the side of a trailer section, EE experienced pain in the neck and shoulder area.
220261400016M10592employee slipped and fell on their right side of their body
220261400017M12155While performing routine cleaning duties, the operator of a Bobcat MT100 mini track skid steer reversed the equipment and made contact with a protruding motor. This resulted in an impact to the operator's lower back
220261400018M11534Employee was starting the shift and was participating in a stretch and flex program when EE felt a pop in EE's lower back leading to pain and discomfort.
220261400021M12486EMPLOYEES WERE DERODDING THE ROD MILL. EMPLOYEES PICKED THE ROD UP AND CHARGER BELT BROKE. EVERYONE WENT TO LET THE MILL ROD BACK DOWN WHEN THE ROD SLIPPED OUT OF EMPLOYEES HAND AND LANDED ON EE'S LEFT FOOT ABOVE EE'S STEEL TOE IN EE'S RUBBER BOOT.
220261400022M11333EMPLOYEE WAS CLIMBING OFF OF A LOADER WHEN EE SLIPPED OFF OF THE CHAIN STEP, EE'S FOOT HIT THE GROUND AND EE ROLLED EE'S RIGHT ANKLE.
220261400025M11534Container of parts was being lowered to a mechanic in a confined space. The rope broke and the container fell on the employee striking EE on EE's hardhat
220261410003M10822EE was pushing a welder into the elevator when EE strained EE's neck and shoulder.
220261410004M12205Excavator operator was excavating smoldering material. MSHA inspector stated EE momentarily saw flames. All personnel were withdrawn from the mine immediately. There was no damage or impairment to operators or equipment.
220261410009M10682Teammate fell backwards while restacking a pallet from the conveyor 
220261410010M11894Miner was loading a room with explosives from the man basket of the powder rig, when a softball sized rock fell and hit EE on the hand that was resting on the handrail, resulting in injury.
220261410011M10712While changing teeth on a 992 EE felt a couple pops in EE's left wrist.
220261410012M11083Miner was cutting a conveyor belt with a utility knife when the blade slipped and lacerated EE's right knee.
220261410014M11494The employee was walking down the stairs when, at the bottom step, EE felt EE's hip roll and felt pain. EE did not trip on anything and did not fall.
220261410016M12616The excavator was parked 20-25 ft from an energized 13.8 kV overhead power line. During inspection, the boom entered the unsafe proximity zone and contacted the energized line, causing an electrical fault. Sparks and hot particles ignited nearby dry vegetation.
220261410019M11524At plant startup, EE walked under the tail pulley frame of the 400 feed conveyor and stood up too soon striking EE's back on the frame of said conveyor.
220261410020M13027Employees were pulling a vertical turbine pump, had placed a joint of column pipe on lay down timbers. As the pipe reached the last timber, it was slightly higher, so employee attempted to lift the pipe and exacerbated a recently repaired hernia. Surgical repair slated for 05/21/26. Currently ONGOING.
220261410021M12345Ee was stepping out of conex holding a box of uniforms and EE rolled EE's right foot on the lift gate. Seen at clinic, diagnosed with right ankle strain, and released with restrictions that do not preclude EE's full duty as a planner.
220261410022M13147Ee climbed on scissor deck to assess what would be needed for the job. Reported pain in back. No injury by accident, ee has long history of back issues that are non-occupational. Claim is being denied by workers' comp pending medical investigation. Ee on restrictions, site cannot offer modified duty at this time.
220261410023M12596While carrying buckets up the stairway in a yellow tub to replace buckets on EQ 250, the miner reached up to lift the tub over the railing. While turning and overextending during the lift, EE immediately felt a burning pain in EE's rib area and mid back area.
220261410024M13368A dust collector bin was being emptied. Material flowed over the toe board and fell below and became airborne. The employee was covered in a layer of fine dust. The employee sought medical evaluation the following date and released to full duty. 2.5 months later the employee was placed on restricted duty with respiratory inflammation.
220261410025M12275Employee was working in an awkward position trying to replace a bad hydraulic hose for multiple hours.  EE was laying on EE's stomach and reaching into the access door. After work was completed, employee reported a back strain.
220261410026M11864While getting out of the pickup in 158 lot EE employee stepped down on a rock causing the employee to twist EE's ankle. Became reportable on 05/15/2026 when diagnosed with torn ligament.
220261410027M137483/2/2026 employee with 2 yrs of exp was dismounting from scaler u/g when they stepped into hole and fell employee tweaked their right knee 3/3 employee was seen at clinic given MRI, 3/24 dr verbally released employee with no restrictions, employee refused to go back to normal job and was terminated on 3/31, on 5/21 company was notified of WC claim with PT and rigid brace.
220261420001M11704Employee was guiding the cable rope into the spool. EE's finger was pulled into the spool crushing the end of EE's finger resulting in a broken index finger and stitches.
220261420003M10552Employee was using a shovel and strained EE's shoulder.
220261420009M13588Right ear STS meeting the MSHA Reportable Criteria. Hearing loss pattern consistent with presbycusis and noise exposure. right ear shifts likely to be caused by workplace noise exposure according to audiologist. Employee is a supervisor for the operations department. Time around running equipment is where this employee experiences noise levels above 85 DB.
220261420010M13337EE was assisting the plant welder, with fabricating brackets for the bin gate clam shell. While using a drill press and grinder small metal particles collected on the sleeves of the EE shirt. EE wiped EE's face with EE's sleeve contaminating EE's eye with the small metal particles. EE did not seek medical treatment until 5/12/2026.
220261420011M12987Employee was getting off of the back of water truck. Upon exiting, EE's glove became stuck, lost EE's footing and was swung towards the back bumper which is about chest high. Employee sustained soreness to the ribs. After a CT scan on 05/13/2026, it was discovered the employee had a fractured rib.
220261420020M13738Miner was working on crusher changing screens when the screen slid and caught EE's hand.  In an effort to avoid significant injury, EE retracted EE's hand and in doing so caught EE's (R) middle finger on a sharp edge that cut through the glove and lacerated finger.  Medical treatment was administered at clinic and required a few stitches.  Returned to work following day.
220261420021M11403Employee diagnosed with a MSHA Reportable STS. Audiologist states that workplace noise exposure likely contributed to the change in hearing.
220261420023M13849On May 13, 2026, at 1:15pm, an employee ignored an operator's warning, removed a guard, and reached into a moving conveyor to apply dressing. EE's arm caught, pulling EEs forearm into the headroller & pillow block bearing. Bolt in bearing caused a deep laceration. First aid was given & EMS responded. The worker was hospitalized for surgical repair of the laceration & a muscle tear.
220261420024M12135EE was was working on the plant. EE was applying pressure to a prybar when EE's hands slipped off and EE's right little finger was pinched by the bar, resulting in a fracture to the tip of EE's right pinky finger.
220261460004M11624EE was welding under the feeder at the primary plant at Penn MD Quarry when a welding bead dropped and fell down into EE's boot, burning the top of EE's left foot
220261460006M12105At approximately 10:50 PM, two employees were cleaning beneath the screw conveyor when one employee came into contact with the other employee's tool, resulting in an injury to the affected employee's right eye.
220261460008M12656EE was putting a piece of steel inside wash plant to be bolted with two people. EE was on outside putting bolt through steel. Steel slipped from the inside and smashed EE's finger against chute. Resulted in hairline fracture of middle knuckle on right index finger.
220261460010M13528Employee was removing valve from Tilden 1 #2 South deaerator line when their left hand was pinched between the valve and a handrail. The employee was wearing gloves at the time of incident and sustained a laceration to their left hand. Employee was transferred to local ED for evaluation and received medical treatment (7 sutures) and returned to work.
220261460012M11013Employee was dismounting EE's Loader. EE's foot twisted as EE stepped off the ladder onto the ground.
220261460015M13758Employee was removing a fire water valve when the employee's left finger was pinched between the valve and the hand railing while lowering the valve with a chain hoist. Employee was transferred to local ED for imaging which revealed nondisplaced fracture to employee's left pinky finger. Employee was provided a splint for immobilization and protection and returned to work. 
220261460018M12997Employee was standing next to wrecker trailer and reached up on the trailer to retrieve EE's earmuffs. When EE stepped back, EE stepped on the welder power plug connection, twisting EE's knee. EE was taken to the ER and given restrictions that cannot be accommodated at this time. Currently ONGOING.
220261460019M12776While replacing an HSI crusher lift cylinder, the component shifted, pinning the employee's finger against the crusher wall. The employee sustained an open fracture of the left middle distal phalanx. Treatment included stitches, a splint, and medication with work restrictions.
220261460020M12135Employee was on a safe rack when the flooring gave way. Employee did not fall all the way through and fall protection was in use. During the process of catching self the employee bruised the left arm and left leg.
220261460022M11444While loading 14-foot jumbo steels onto the rack, the jumbo began reversing; a steel caught on rock, sprang free, and struck the IP's left knee.
220261460023M12325A miner tweaked EE's knee while accessing the boat to work on the water pump.  The injury occurred on 5/15/2026 and was placed on restricted duty on 5/18/2026. The miner has returned to full duty on 5/22/2026 with no lost work days.
220261460024M12315EE was entering EE's haul truck when EE heard EE's right knee pop when sitting down into the seat.  Miner had an MRI done on 5/19/2026 where a tear in EE's meniscus was found.  The miner is scheduled for surgery to repair the knee.
220261470001M11333The operator was performing a wash-down using hot condensate when the hose split, resulting in second-degree burns to the chest area.
220261470002M11504The employee attempted to reconnect a hose when material splashed into EE's left eye. The employee received antibiotic medication to prevent infection
220261470004M11664Employee was standing next to a welder torching a bolt.  Welder turned hit employee's left hand and burned left hand. Burn caused a second-degree burn.  No lost time.
220261470005M11614EE was performing grinding operations, the following morning EE felt irritation in EE's eye. It was discovered that EE a small piece of metal debris in EE's eye.
220261470007M11604On Monday, May 18, in the first shift, the operator of the r-line 1 area, suffered a sprained left shoulder, while placing 50-pound bags of product on a pallet.
220261470008M11323Emloyee stepped out of a medium duty vehicle onto uneven ground and rolled their ankle. This caused a fracture to the distal fubula.
220261470009M11794Lost incoming power from Rocky Mountain Power. Mine fans were lost and mine was evacuated. Notified MSHA. Power was restored at 7:00pm and miners returned to the mine by 10:30pm. 
220261470011M13277The employee met with supervisors in a parking lot on the east side of the building. After the conversation, EE turned to walk back to the office and tripped over a wheel chock (angle iron) because EE did not fully clear it. EE fell onto EE's right knee and elbow. EE was wearing steel-toe boots, and no other PPE was involved.
220261470013M12606EMPLOYEE WAS STEPPING DOWN INTO THE MINI X 303.5 TO BE SEATED. WHEN EE STEPPED DOWN ALL OF EE'S WEIGHT WAS ON EE'S LEFT HIP AND IT POPPED CAUSING SEVERE PAIN. EMPLOYEE WAS ISSUED A PRESCRIPTION MEDICATION MAKING THIS REPORTABLE. EE WAS NEVER PUT ON LIGHT DUTY.
220261470014M13628At approximately 6:15 pm, EE was working on the platform at M280 head pulley area, during the replacement of M281 tail pulley. While removing compartments and metal plates to access the work area, one of the plates became stuck, as EE attempted to free the plate, the metal plate suddenly came loose and struck the inside of EE's left knee, causing a laceration.
220261470016M12075Employee was checking for a leak in a hydraulic hose when EE received a puncture in EE's right hand index finger. EE was taken to the hospital for examination of suspected oil injection to the puncture site.
220261470018M12856Employee was repairing a Raymond Roller Mill Journal assembly.  EE was lifting the part with a sling and forklift to position it on a work table.  EE attempted to reposition the part before placing on the table when the assembly came loose and a portion fell crushing EE's right thumb.
220261470019M10592Mechanic was helping another employee hang a rubber blanket
220261470021M12606The equipment was locked out and electrical energy was isolated. During routine V-belt alignment and tensioning, the employee manually repositioned the belt. EE's right pinky finger entered the pinch-point area between the belt and pulley, resulting in injury.
220261470022M10652Employees finger was pinched in a safety gate causing laceration.
220261470025M11624While performing maintenance on a gearbox, a secured motor shifted after a support bolt was removed and struck the employee. The employee sustained a neck injury.
220261470026M11474Employee was climbing off the ladder of a 993 loader. The employee missed the last step causing EE to fall to the ground injuring EE's right elbow.
220261480004M11694Employee received abnormal results on hearing test for right and left ear. Employee was retested and for a second time received abnormal results for right and left ear. 
220261480005M13788While an employee was manually turning the HPGR drive with a prybar the inertia of motion from the HPGR rolls continued to shift the drive with the prybar wedged in between while the employee's hand was still grasped onto the prybar. The force of prybar pinched the employee's right pinky finger against the bottom of the metal cage used to guard the drive when it is energized.
220261480008M13037Miner was taking the pin retainer cap off of an excavator bucket (heavy round collar weighing about 30-40lbs). EE had to remove three bolts holding the collar on. It released easier than expected. EE's fingers were crushed between the collar and the bucket, breaking EE's left ring, and middle, fingers.
220261480009M13227While exiting the machine to take a break using the ladder handrail system the employee losing grip on a grease contaminated handrail resulted in a fall from the equipment approximately 3-4 feet to the quarry sand surface. This placed the operator off work and modified duty as of 05/11/2026 due to a lumbar strain/sprain.
220261480010M12085Driver and Passenger (IE). Both employees were wearing seat belts when traveling in a Polaris UTV. Took a corner too sharp, turned UTV onto it's side on concrete surface. Passenger sustained elbow laceration.
220261480012M11063While attempting to remove a hydraulic hose, the employee pulled to hard and gave self a suspected hernia.
220261480014M12295Laboratory technician was working with a box cutter knife when they went to preform a task in the lab. The knife slipped from their hand resulting in them instinctually catching the knife and causing the knife to cut their thumb.
220261480016M10241Audiogram identified STS
220261490002M13418while changing teeth and cutting edges on 988H loader 23.3804 eq #.  a wrong bolt was inserted in one of the holes by mistake and while removing it EE cut EE's left ring finger. first aid was rendered and later in the morning went to Urgent Care where they cleaned the wound and did 4 stitches.  no restrictions and returned to work same day
220261490003M12125Employee was walking into the maintenance office when EE tripped, fell and land on the maintenance lunchroom glass door. Employees elbow/arm broke the glass on the door resulting in laceration of the tricep area.
220261490005M13488Miner was at end of shift and stacking unused metal pieces after working on fabrication project. Miner was walking on metal sheet that was on the ground and fell, the fall resulted in a broken lower right leg.  It was dark in this area, miner was using a headlamp for light. Medical services responded and took EE to the ER, miner required surgery.
220261490006M13287On Friday, 22 May 2026, welder reported to work with a swollen right eye. EE was conducting welding repairs on site the day before and felt pain in EE's right eye the following morning. Human Resources approved medical attention, and a piece of metal was removed from EE's right eye at a local vision center on Friday afternoon.
220261490007M11995Miner was assisting in changing out a screen. The screen slipped while being moved into place and struck the miner's hard hat. The hard hat slipped over EE's face and impacted EE's nose, breaking it.
220261490010M13578Employee was working on assembling a conveyor with a come-a-long. While cranking on the come-a-long with significant tension the come-a-long released unexpectedly, causing the gears to free wheel; jerking employee's left shoulder toward the core of EE's body causing pain to EE's left shoulder.  Went to clinic on 05/20/26 and was placed on restricted duty.
220261490011M13518Employee states its a progressive pain, pain progressed over a few days and reported on 5-26-2026, no known injury. While lifting and packaging stone employee experiences pain in right forearm extending down to EE's ring finger. Seen Dr. no tests performed, told to use ibuprofen and ice, but placed on restricted duty. Follow up with Dr. in one week.
220261490012M11674Miner was using a hand-held grinder to cut sheets of metal.  The metal shifted and the grinder slipped making contact with the miners left thumb resulting in stitches.
220261490014M13037Miner was pulling drill out of hole when EE lost EE's balance and fell. As miner fell EE's middle finger on left hand became caught between the machine and leg pinch point. This caused a laceration to the left 3rd finger. Miner was taken to clinic for fingernail removal at nail bed requiring 7 sutures.
220261490018M11243EE was troubleshooting a motor on the autosampler. While attempting to actuate the brake, wires arced, causing an arc flash.
220261520001M10512Foreign Body in left eye while working under feeder
220261520002M12756A miner was finishing driving a split set bolt and as EE was removing the jack leg the driver hung up in the bolt. When pulling on it the driver freed suddenly causing EE to step back awkwardly on a rock resulting in a right knee injury. MRI showed a ruptured patella tendon.
220261520004M10782While performing maintenance a wrench slipped, hitting employee in face/tooth.
220261520005M12606Employee was assigned to jackhammer the Finish Mill (FM) feed chute at FM6 due to material buildup/restriction inside the chute. While performing the task, the employee reported EE slipped and caught self with right elbow and has a pain in EE's right shoulder.
220261520009M10582Employee moving a pallet pulled a muscle in EE's left arm.
220261520013M13017Miner was using a pry bar to perform maintenance.  Pry bar slipped and made contact with miner resulting in a laceration underneath the left eye.  Miner required additional medical treatment to glue laceration shut at local medical facility.  No time lost to the incident or restrictions on the miner.
220261520015M11173EMPLOYEE WAS STRICKING SIDE OF ANFO POT TO LOOSEN ANFO WHEN THE HAMMER CAME BACK AND HIT EMPLOYEE IN MOUTH AND CHIN. 
220261520017M12967Ee working to clear apron feeder was about 3-4 steps up, slightly turned upper torso to grab mill bar, felt sharp pinch/shooting pain from back to hips into legs. Stopped work, reported issue. Seen at NNRH, diagnosed with lower back pain, released to full duty. On follow-up, put on restrictions.
220261520019M13438Ee was driving Ford F250 underground, heard a loud bang, slowed to stop, saw flames coming from clothes, jumped out of truck, rolled on ground. Truck rolled, ee grabbed fire extinguisher, called mayday, tried to put fire out. Shifter arrived, took ee to surface. Seen at ER, diagnosed with 2nd degree burns to left hand, referred to burn unit.
220261520020M13388EE raised a sight door on conveyor C10 while greasing the tail pulley to ensure the bearing was taking grease. The door was not secured open with the safety latch. While greasing a gust of wind blew the door down striking EE in the back of the head. EMS was called and employee was taken to hospital via plane due to risk of brain injury.
220261520023M11003Operator was lifting a pallet at the surface warehouse when EE felt something pop in EE's right arm.
220261520024M11784Tailgate intersection fell above anchor point.  Ventilation was not disrupted, no employees were trapped or injured.  The longwall continued to mine to get through the fall area.
220261520025M12175Employee went to the main office complaining of head ache. EE took some aspirin. Ate some pizza rolls and sat down to rest. Office manager noticed a sound coming from the employee and noticed that EE was unresponsive.
220261530001M13127employee was at the 500 scalping screen conveyor - it had gotten clogged and EE was removing rock from the conveyor when a rock fell from the platform above EE (EE thinks, but is not sure where the rock came from) and hit EE below EE's right shoulder blade; treated, diagnosed with internal bruising, cracked rib
220261530006M11644EE was assisting another employee that was working on a dozer when EE's left middle finger got in the way of the hammer and was struck causing EE to need 2 sutures.
220261530007M11153Employee was shoveling around the secondary plant we a rock fell and struck the employee in the nose and face area.
220261530010M12375operator doing pre-op not in accordance with standardized walkaround sequence for a CAT 745 Rock Truck causing the operator to fall from the truck platform causing lower back/buttocks injury placing the operator off work on modified duty
220261530011M12025Miner leaned forward onto a full FIBC to tie the top spout closed which caused powder to exit the top spout into their face. The dust bypassed their safety glasses causing irritation to the left eye.   
220261530012M11303EE was taking the cutting edge off of a loader. A bolt slipped, EE reached for it cutting EE's hand open. EE received 13 stitches.
220261530014M11894EE was working on a hydraulic line that was leaking. When EE loosened the fitting hydraulic fluid sprayed on EE. EE was taken to the ER for precautionary reasons and prescribed antibiotics.
220261540001M11353Cement powder flushed from " pipe opening and into employees eye as EE was attempting to install and air line into the top of a hopper
220261540005M12205The employee was taking a busted bag off the conveyor belt and as EE tossed this bag in a wheel barrel the material in the wheel barrel blew up into EE's face getting under EE's safety glasses and causing and eye injury.
220261540006M12245While walking down the shop stairs the employee felt and heard a pop in EE's knee causing pain and trouble putting weight on. Employee was prescribed medication for swelling and a knee brace resulting in a reportable injury.
220261540007M12065Had an underground master equipment operator sustain a laceration to their ear while traveling under a drive through curtain. Curtain was torn at bottom and made contact with EE's ear while traveling under.
220261540009M11123EE rolled EE's ankle taking a step down from an elevation. After an MRI is showed a small tear to EE's ligament.
220261540011M13638During grounding cable installation, one of the cable lugs did not fit over the installation bolt. The employee attempted to enlarge the lug opening using a handheld drill while holding the cable by hand. The drill bit became stuck, causing the lug to rotate unexpectedly and contact the employee's hand. The employee was assisted and sent for medical evaluation.
220261540012M11423Employee was attempting to rig up equipment to unload off of a trailer when EE fell through walkway injuring EE's leg and rolling EE's ankles.
220261540017M11804Employee stated that EE was wearing EE's safety glasses and hard hat while working. When EE took off EE's hard hat, something fell off on top EE's eyelashes. Foreign object in eye.
220261540018M11514Patient states EE was bending over with a caulking gun to patch a hole, when EE "tweaked" EE's lower back. Strain with RICE method and OTC medications.
220261540019M11073Employee was squeegeeing the floor, when they felt a pop in their knee. Continued to pop throughout the day
220261540020M13297on 5/15/2026 miner was struck by loose rock from the back while kneeling to load lifters on the sill. Miner refused medical evaluation and completed shift and rotation. On 6/2/2026 miner stated EE had ache in right side pelvis area and was taken for medical evaluation and was placed on restriction for a contusion to the pelvis.
220261540021M12155Employee was attempting to track the return side of the conveyor belt by striking the frame of the roller with a hammer to move it backwards.  EE missed and EE's hand got caught between the conveyor belt and roller.
220261540022M12075Employee was trying to remove a 100lbs rock off of a belt.  Employee picked up the rock, swung to EE's left side smashing EE's finger into a metal railing.  The rock smashed EE's pinky resulting in stitches.
220261550001M11774The employee was performing service on an F-450 pickup truck, and when lowering the jack, the vehicle rolled over the employee's left foot, causing a small fracture to EE's toe.
220261550003M12275Loose material during loading allowed a rock to roll from the bucket and strike Cat 75, causing a rough load event. The impact broke the rear window. The operator later developed back pain and required clinic evaluation by ERT.
220261550006M12696While removing a bed pin, stored energy in the component caused it to suddenly dislodge and shift the bed. The uncontrolled movement allowed the brass bar to slip and drop, pinning the employee's hand against the tire. Resulted in a hand injury from impact/pinch force.
220261550007M13187Employee was shoveling material from under the conveyor belt and felt slight pain in lower back (failed to report), operating haul truck and went home.  It was not until 6-3-2026 (following day) when employee had a hard time getting out of bed for work when it was reported.  Resulted in acute lumbar myofascial strain
220261550008M11844Employee was operating an air chisel to remove a surface miner tooth when felt discomfort in EE's right elbow.  The employee had a strained elbow along with bursitis in right shoulder.
220261550009M11624Injured employee was assisting 3 other employees take measurements at the primary crushing plant. Injured employee lost balance, slipped, and impacted the ground.
220261550010M12125An employee was cutting bolts with a grinder when the tool unexpectedly kicked back, causing the grinding wheel to contact the employee's left wrist.  The employee sustained a laceration requiring seven stitches.
220261560001M11704Intersection in the tailgate of the longwall fell above anchor point.  Ventilation was not disrupted, nobody was injured, and the longwall has mined through the bad area.
220261560002M11173A roof fall occurred in L3/C88 due to water and poor roof geology in this area. The area was barricaded immediately. 
220261560006M12406Ee and leadman were using a come along to pull a screen motor forward to disengage the belt, as the EE tried removing the belt from the pulley, the lifting eye snapped, and the EE's left middle finger was pinched between the belt and pulley
220261560007M12746EE and another employee were removing a crusher bowl for maintenance and while using the ram to unscrew the bowl, the EE reached down to reposition the ram and as EE did the control operator retracted the ram and pinched the EE's finger between the ram head and the cylinder
220261560010M10261Employee tripped on rocks 
220261560012M11634While repairing a Volvo L260H front end loader a wooden block that was supporting a tilt cylinder fell and struck the employee on the back right side of EE's head.
220261560014M12656Ee adding bolts to carousel on bolter when rock came down, striking EE on the head. Transported to HGH, diagnosed with a scalp laceration and closed head injury, released to modified duty. Ee followed-up on 6/2 and put off work. Diagnosis was changed to concussion.
220261560015M11504Employee was changing cutting edge blade. Place hand on bolt for support and bolt spun out, grabbing EE's gloved hand and cutting through to the skin.
220261560016M13127Miner was bolting up hog panel in the heading. When the miner started drilling the panel shifted causing the bolt driver and plate to come loose and fall towards the miners left forearm where the roof plate contacted EE's left forearm above the cuff of EE's glove resulting in a "T" laceration requiring sutures.
220261560017M11173Walking across the leach pad, stepped and sunk down to EE's left knee. when EE pulled it out of the mud EE felt a rip
220261560019M12335One employee was stuck on a personal elevator between floors 6 & 7 for 55 minutes. Employee was able to get out, elevator company was called to come investigate and make repairs. Repairs were made on 6-4-2026. No injuries or illness.
220261590001M12686I am writing to formally report a dirt bike accident that occurred on the Sand pit property on May 31, 2026, at approximately 4:00 PM.  The individuals involved were trespassing on the property at the time of the incident. During the accident, a young man was injured.
220261590006M13207EE was flipping the stationary jaw die on the 400x Powerscreen Jaw and prematurely removed the lifting strap before it was secured, dropping it on EE's left foot. EE wore proper PPE. Foreman and operator witnessed the event. An EE immediately helped lift the heavy die to free EE's foot. A properly rated strap was used.
220261590007M11995Employee was operating a bulldozer in the pit. EE parked the bulldozer and exited the machine. As the employee took EE's last step to the ground, EE rolled EE's ankle and immediately felt discomfort.
220261590010M10602Overuse of arm opening and closing window in the scale house
220261590011M10822Employee was cutting hoses with a box cutter, slipped and lacerated their finger. 
220261590012M11293Slipped and fell on oil spot on concrete pad. Hit hand on bench vice causing a laceration on left hand, requiring seven stitches.
220261590016M10411Sprain of right ankle, stepping on a rock
220261590017M12666A Met Mill Tech was moving some sample buckets when they experience pain in their lower back. They claim to have bent over and picked up a sample tray/bucket and twisted and felt a knife sensation in their lower back. The employee went on restrictions on 05/28/2026.
220261590018M13388During normal loading operations, the Shovel was swinging back into the bed of Haul Truck with the second dipper when the dipper dropped into the bed. The dipper landed half on, half off of the dovetail causing the bed to rise. The front of the truck rose into the dropping back to the ground. Employee went on restrictions on 06/03/2026.
220261590020M12556Employee pulled a muscle in EE's back while climbing a ladder to do a screen change out. EE went to the doctor later that evening and received a muscle relaxer. X-rays were negative. EE has been released to full duty and will return to work on 06/08/2026.
220261590022M13027Employee ascending stairs was struck by material dislodged from handrails by an employee descending. Dust entered left eye behind safety glasses. Employee rubbed eye, resulting in corneal abrasion. Treated with OTC eye drops; prescription cream provided as a preventive measure only, not for treatment.
220261590024M11173#4 Hoist is down with an electrical issue. All travel in and out of the mine has been moved to #3 Hoist and #2 Hoist.
220261590027M13758We believe EE fell backwards off the steps of the loader while either trying to climb up or down the steps, EE was not with or near anyone to verify what happened to EE and EE has no memory of what happened we are solely basing this on context clues, another employee found EE's glasses about a foot from the loader on the ground that is why we believe EE fell off the loader
220261590028M11193Keyway on shaft of Production Hoist Sheave wheel broke causing shaft to shift and caused damage.  Had to replace shaft.
220261590030M13067An employee was cleaning accumulated mud from around a machine guard when their tool contacted the moving conveyor belt. This contact caused the tool to pull forward, pinching the employee's hand against the gearbox. The incident resulted in lacerations that required medical treatment, including stitches.
220261590031M12365Ee sustained a Standard Threshold Shift in hearing. Confirmed reportable noise induced hearing loss. Occupational exposures could not be ruled out. Confirmation received from, Au.D. CPS/A, on 06/01/26. Retraining and refitting complete.
220261590033M12666Employee was attempting to seperate a liner using a wedge and a hammer. Upon striking the wedge the wedge bounced out and struck the employee on the right hand just above the the thumb. This caused a laceration of approximately 2.5 inches vertically above the thumb.
220261590037M11965EE was splitting a sample in the test lab. EE was lifting a splitter box to dump and felt EE's right bicep get tight. EE was taken to OMP for evaluation and referred to a specialist for follow up.
220261590039M12987Miner was attempting to readjust the flash pipe to better seat the coupling. The pipe had pressure causing the flash to come towards EE's face. The dust accumulation was more than traditional flush technique could remove. Miner was transported to local medical facility and received a Morgan Flush.
220261590041M10752Silo change to FM3 employee was pulling blanks and material went into eyes.
220261590043M13177Ee using blue room that had just been serviced. Wiped down seat with provided scrubs. Sat on seat, came in contact with chemicals used to service blue room. After a short period of time, experienced swelling and dermatitis on genitals and anus. Seen at HGH, released to full duty, with 48 hours off allowed if needed.
220261590045M13628At approximately 6:30 a.m. on Friday, employee was attempting to open a railcar door using a manual rail bar. Employee rocked back to apply force to the rail bar, the bar disengaged from the railcar door knuckle. EE fell to the ground and was observed with EE's right foot turned outward. Medical evaluation later determined that EE sustained a fractured fibula.
220261600004M12115Employee was cleaning water line when the weld broke causing slight contusion/bruising on EE's left top of foot.  Employee did not miss any work and has since reported for work this morning with no restrictions.
220261600005M11784Miner was loading steel on the rack when EE needed to reposition the strap to the hoist. The load shifted and pinched the left hand between the ring finger and the pinkie finger.
220261600006M12616Employee was going down to belt deck around 8 belt rounded the corner baring all weight on right leg, turned the corner like individual usually does and felt a pop or snap, couldn't put weight on it after. Waiting evaluation Doctor Recomend Surgery June 06 2026
220261600008M12345A 50 lb. bagger employee was opening an air valve at silo #2 in an attempt to unstop the line around 6:00 pm. The employee struggled to open the valve and felt that EE had pulled a muscle, so EE stopped work and reported the incident.
220261600011M10922Production hoist stopped operating.  Recycled start up procedure and hoist began to operate.
220261600013M11604EE WAS USING A METAL AEROSOL CAN OF SILICONE LUBRICANT WHEN THE CAN SUDDENLY EXPLOED IN EE'S HAND.  THE EXPLOSION CAUSED AN AVULSION TO EE'S RIGHT INDEX FINGER.
220261600015M11233While moving fire extinguishers for inspection the employees' hands cramped up and was unable to get EE's fingers straight.
220261610002M11083Employee stepped off rear bumper of service truck and made contact with rock, causing ankle to roll and pop.
220261610003M11464Employee was walking on a slope and lost EE's footing, falling down the slope approximately 8-10 feet. Employee sustained muscle spasms from fall.
220261610004M11313Employee alleges EE was changing fork belt and operator moved forks back and belt was stuck and released resulting in hand abrasion
220261610005M11093Employee alleges EE dislodged rock from conveyer and when rock gave way, EE fell to ground and strained ankle
220261610008M12295EE reports backing over a drop-off and experiencing neck pain as a result of the whipping motion that it caused. EE went to ER after incident and was contacted by Clinic the next morning to obtain documentation for the incident. 
220261620001M12466employee was performing a prework inspection of a rotary crusher. while rotating the drum to each hammer EE's left hand became caught between the wall and hammer. resulting in fracture of EE's left pinky finger. referred to an orthopedic surgeon.
220261620002M10431Smashed EE's finger between guard and frame
220261620008M10973EE was walking across a berm and stepped on a rock; the rock shifted, causing the ankle to roll. 
220261620010M10221Lost grip of hand rail
220261620011M10822Pulling plugged hose off of dust collector system on a drill, strained right arm. 
220261620012M13708Two employees were moving pallets of DEF (Diesel Exhaust Fluid). One employee was using a pallet jack and the other employee was operating a forklift. The pallet jack became stuck under a pallet of DEF. The employee pulled forcefully on the pallet jack, it came free and the employee stumbled back hitting EE's back on the end of one of the raised forks of the forklift.
220261620017M10882Dismounting motor grader and missed a step climbing down the ladder straining right arm.
220261620018M13227Employee was tracking the Trommel plant when something came out of the track and struck the employee in EE's right side causing a laceration. Employee administered first aid but that night was changing bandage & realized something was in the laceration. Went to clinic and removed 1/2" piece of metal, received one stitch.
220261620019M12245Miner was crouching down between support legs of conveyor to look under jaw and then stood up and made contact with crossbar that was part of the support legs. The contact led to a broken nose and cut lip. Stitches required.
220261620020M12195Employee went to charge Milwaukee battery on charger. Charger did not function and when employee went to unplug charger EE felt a shock. Upon inspection damage was noted on the cord. Employee taken to ER for evaluation.
220261620022M11363Employee was opening a valve to the water pipe.  Plastic water line blew out a gasket, the pipe shifted causing employee to get injured.
220261630001M13137Employee was collecting a tool by the Ore Apron Feeder.  As employee was going down a section of stairs, employee slipped and landed awkwardly rolling employees' ankle.  Employee visited doctor and was diagnosed with a severe ankle roll.  Walking boot was prescribed.  Employee returned to work with no lost time.
220261630006M12947Employee was doing maintenance on the crusher. EE was tasked to grind the left hand side of guard rail on the tall pully of conveyer belt. While getting down from the conveyer EE mis stepped and slipped, causing EE's right hand to come into contact with a piece of metal cutting EE's right hand
220261630009M13277A rail operator parked a fuel truck, applied the parking brake, and used three points of contact to exit the cab. Upon stepping onto flat, dry ground, the employee turned away from the vehicle and experienced sudden pain in the lower right leg and knee, resulting in restricted joint movement. EE was placed on restricted duty.
220261630011M11223EE was moving pieces of stone out of EE's working area, one of the pieces rolled and grazed EE's leg causing a laceration.
220261630012M12666Employee was working maintenance on a conveyor belt system and felt a strain in EE's lower back while EE lifted the belt. Upon being interviewed, EE stated that EE believed EE aggravated a prior non-work related injury that had put EE out of work for several months.
220261630014M13498Employee claims EE leaned across the bottom drill to fuel it and felt a pop in EE's stomach. EE said EE thought EE had pulled a muscle. EE did not properly report it to management. EE went to the doctors on EE's own volition. EE admitted to being seen prior to our employ for stomach issues. We question this claim and are actively investigating it.
220261630015M13277Production employee was performing the routine task of sampling from a customer loadout truck. Employee pulled/strained right shoulder. Employee reported incident the following morning. Employee was taken to clinic and given a sling and 800mg ibuprofen. Employee is on restricted duty for right shoulder strain until 6/25/2026.
220261630016M12706While drilling a hole in the roof of the water truck to mount an AC unit. EE was drilling a hole with a hand held drill and had EE's left index finger right where the drill bit broke through the roof and drilled into their finger. EE received 4 stitches and antibiotics.
220261660001M11173Employee was pulling a buried cable out of the ground and strained EE's back. Urgent care treated EE for back spasms.
220261660007M10822Worker was swinging a 10lb sledgehammer horizontally and felt a pain in EE's side.
220261660009M11123While working on the shift linkage of an f150 pickup, the truck rolled and struck the employee's right shoulder.
220261660011M12796Ee removing grating from around pump to clean sump. Ee's left index finger pinched between grating and concrete floor. Seen at ER, diagnosed with laceration of finger/nailbed, and avulsion of nail. Wound closed wtih stitches and ee released to light duty on next scheduled shift.
220261660012M12716The employee was stepping down from the 83/84 drop chute door and stepped on the wash pan causing the left foot to extend. The employee felt pain in the left ankle after stepping down. After medical evaluation it was determined that the left Achilles tendon was ruptured.
220261660014M12776IX employee was striking a 980 bucket tooth with a sledge hammer to remove it from the shank. while striking the tooth a fragment of metal chipped off and struck EE entering EE's right lower quadrant of the abdomen area. Employee was transported to the hospital for evaluation.
220261660015M12466Employee was adjusting equipment to align and fit properly near the cone crusher and belt guard. While positioning equipment, the employee's hand became caught and was crushed between the cone and the belt guard, resulting in injury to the hand. 
220261660020M10993Employee was climbing down a haul truck ladder when the employee fault a pop in their left big toe.
220261660021M11995Employee was attempting to remove a rock stuck between two grizzly bars and pinched their left middle finger between the rock and the grizzly bar, causing a fracture to the tip of the middle finger. 
220261660022M11293Weather conditions caused a rise in the Big Nemaha River water level. This resulted in flood water that inundated Dubois Quarry. 
220261660027M11103EMPLOYEE WAS WORKING OVERHEAD TORQUING OIL PAN BOLTS AND FELT PAIN IN EE'S RIGHT SHOULDER AND RIGHT UPPER ARM.
220261660028M13488Operator was pushing downhill on variable ground when after finishing a downhill push, backed the dozer uphill at an angle not perpendicular.  Operator was alone and states that upon reaching close to the top, the dozer hit a hard crust on one track and soft on the other causing it to slide and tip on its side. Operator wore seat belt, uninjured.
220261660030M11333The employee was cutting a piece of wood when a small wood fragment entered EE's right eye from between EE's safety glasses and face.
220261660031M11153Employee sustained a laceration to EE's finger while EE's finger was caught between the lifting chain and sprocket.
220261660033M12345Employee closed mill door after completing work.  Once back in office for approximately 10 minutes, right shoulder pain developed, then later numbness and tingling.  Injury became reportable when restrictions were placed on 06/02/2026
220261660034M10612Strained back while rolling up a conveyor belt on the ground.
220261660036M13438An employee was moving a 4D battery off a drill. The employee placed the battery on the left side guardrail of the platform. The battery became unstable and slipped off the guardrail. While attempting to follow or catch the battery, the employee fell to the floor, landing on their left palm.   The employee reported a dislocated left shoulder
220261660039M11554Employee reached down into the control box to remove plastic gates to drain water from the pond. While pulling them out EE strained EE's lower back muscle.
220261660044M13818Throughout the day performing maintenance (Screen change) in tower 1. While doing the work, began cramping slowly and became increasingly tired. Heat related injury occurred while working outside in hot/muggy temps. Additional conditions, on and off rain showers. Heat related injury (Overheating/heat exhaustion) Employee received fluids at the hospital and was sent home to rest.
220261660045M12406When repairing the excavator track, a rock got crushed in the track and launched a fragment at EE's right forearm resulting in a laceration that required a trip to the ER where it was glued closed. The size of the laceration is approx 3/8".
220261660048M13708EE suffered a low back injury when a boat flipped over in the water. Boat came to rested on dredge pipe EE retrieved by fire/rescue. EE went to a clinic/diagnosed w/a contusion to the back. Released with restrictions did not prevent normal job. Full duty 5/5.  6/5 EE provided supervisor with a Psych Eval removing EE from duty due to PTSD due to the 4/17 incident.     
220261660049M11574Employee was performing maintenance on the 992K loader bucket. While EE was swapping out the bucket teeth, EE sustained an injury to EE's left middle finger.
220261660050M11985EE was turning a wrench tightening a bolt on a screen when EE said that EE hurt something in EE's back, which caused immense pain. EE described it as a knife sticking between EE's back and EE's hip.
220261680001M12145Miner was working in a conveyor head box and had set a 1-ton Lever hoist on the head pulley above EE. When EE bent over, EE's hardhat fell off and the lever hoist slid off the head pulley and struck EE in the head.
220261680002M13838Employee was loading out shot rock and was making berms to contain the boulders as they would fall while EE was digging the shot. Operator was digging on a 45-degree angle to get around a high spot in the floor and a massive boulder fell with a rockslide. The boulder jumped over the berm and hit the right front tire of the loader causing damage to the front wheel and the operator.
220261680004M11484Employee was attempting to remove a ceased impellor from a pump casing when a small fragment of metal sheered and punctured the employees left hand.
220261680005M11153Employee was exiting Skid Steer and hit EE's head on plant staircase. Closed head injury. Contusion and laceration.
220261680006M13388Employee was cleaning an oil container out using brake cleaner, just outside the overhead door for ventilation. The wind kicked up and the cleaner went back in EE's face. EE had on a hard hat, gloves and glasses but a little landed on EE's eyebrow. EE was sweating and it dripped in EE's eye. Rinsed it out with eye wash and was doing ok.
220261680007M11484While the employee was folding up a wing on a QI442, the hydraulic had air in it and the wing fell. The support arm struck the employee on the head.
220261680009M11113Employee was cleaning inside #1 cooler when EE slipped bumping head on floor and hitting shin on cooler paddle.
220261680010M13007A mechanic was working on a jam of an elevator flop gate. While attempting to remove the jam, the flop gate shifted under pressure and caught the mechanic's wrist. The mechanic sustained a fracture to the right wrist and possible ligament damage. The mechanic was prescribed medication and lost time.
220261680011M10702EE driving a vehicle hit a berm and received a laceration to the face.
220261680012M12005Employee Injured back changing screens approximately one month ago and reported to HR on 6/13/2026 that EE wanted to file for work comp. This was the first that the company was notified of the injury.
220261680013M11454Miner injured EE's knee while working on a slurry pipe. Injury became reportable on 6-11-26 when surgery was performed to repair a torn meniscus.
220261680016M13758Employee was attempting to enter the Genie lift man basket when EE received an injury to EE's right third finger. Employee clipped EE's fall protection harness onto the basket and then gripped the basket railing and entered the basket. As employee's weight entered the basket, the basket slightly suspended, and EE's finger was pinned between the basket and platform railing.
220261680017M11403Employee was cutting a piece of handrail pipe in K2 RM bucket elevator pit and cut EE's left forearm, taken to clinic and received stitches.
220261680018M13658The miner stepped onto the wooden pallet that was on the scale platform to hang an empty bag on the hooks. The injured miner took a step back with their right foot onto the metal grate platform. The injured miner contacted the metal grate platform with the toe of their foot, causing the miners ankle to roll. Fracturing the 5th metatarsal bone of their right foot.
220261680019M13107When using a chain binder to chain pipe to floats, the employee lost their balance and fell off the pontoon, landing on the ground. When falling they knocked the cheater pipe off the float they were using to tighten the binder, causing it to fall and strike the employee, causing a laceration to the forehead. 
220261680020M13418Employee was performing EE's job task and started feeling symptoms of heat stress. EE was light headed and requested to be checked out. Onsite Safety rep took the employee to the ER to be checked out.  EE was operating a front end loader and the AC worked properly when EE did the pre op, but started having issues with the AC around 8:30am.
220261680021M11975After disconnecting the line fuses, the electrician was attaching a wire in a 120 - 240 transformer, when EE went to tighten the nut with a ratchet an arch flash occurred causing superficial burns.
220261680022M10662Miner was exiting a shaker deck, stepped wrong and rolled R-ankle.
220261690001M11874Miner was in process of installing collar pipe in drilled holes in mining face when a rock fell and contacted the miner. The rock contacted the employee's head back and ankle as it fell. 
220261690002M10802Miner drove freightliner truck off haul road hit highwall and injured EE's back.
220261690004M13458The employee identified a material blockage in a rotary feeder and attempted to clear the obstruction using an air lance. While maneuvering the air lance inside the chute, the running rotary feeder pulled the air lance and the employee's hand toward the feeder. The employee's hand became caught resulting in a laceration. No LOTOTO was applied.
220261690006M12205An employee was filling bags when one of the bags began to shift out of position. The employee reached to adjust the bag but missed and made contact with the saddle backing, resulting in a cut to EE's right index finger.
220261690007M12035Employee was on rock pile instead of at the bottom picking branches and debris out of pile. Was hit in the head with a rock coming off of the screening plant. Employee went to ER with possible concussion
220261690008M112432 team members were disassembling the VFR when the hose fell and hit 1 team members right hand between EE's index and thumb.
220261690009M11263Employee was descending from ladder- EE lost EE's footing and got caught up in the ladder cage.  EE landed on EE's right elbow
220261690010M11624Miner was pulling the battery from the battery tray when the rope that was attached to the battery fully extended and "snapped up" and jerked EE's right shoulder.
220261690011M12506Employee swung a hammer at a rigging strap, EE missed the rigging strap, and the momentum of the swing caused EE to strike the chute liner with EE's left hand causing the hammer to hit EE's L index finger. Gloves were worn. Six sutures were required.
220261690012M12806Employee was pulverizing dirt samples in the Lower Lab. While placing the bowl onto the pulverizer, a piece of debris was ejected from the equipment and struck the employee in the left eye beneath their safety glasses. "Lab prep room is a room enclosed in the lower lab building."
220261730001M10692Loader operator ran over a rock in the roadway, jarring the operator.
220261730002M11824Walked under a low section of a conveyor and banged the top of EE's  head. EE had previously dropped EE's hard hat and was retrieving EE's hard hat. Requiring 9 staples in EE's head.
220261730003M11824Employee was working in rail yard and caught an air valve on a rail car with EE's radio/pants loop that was under pressure, pressure released and hose/connector hit employee in knee.
220261730007M11764ee was removing water bag hose after pushing line of stone out. a split line drilled behind wire saw cut had a core fall and strike back of EE's hand which caused a laceration.
220261730009M11574Employee ran down the hill from the feeder at portable plant to get the plant shut off due to belt stalled and stepped on a rock and rolled EE's right ankle.
220261730010M11363Employee was attempting to manually move the conveyor hopper box and lost EE's footing. Fell backwards to the floor, striking EE's head.
220261730011M11153Employee was entering a silo by way of a work platform and as EE entered the silo EE heard a pop in EE's left knee.
220261730012M10993Employee was repairing a swamp cooler when EE injured EE's left-hand pinky finger needing stitches.
220261730013M13828On 5/16/26 ee was driving a light vehicle underground on the 4260 ramp. EE ran over a piece of metal that went through the floorboard of the truck, inches away from EE's leg. There was no injury. On 6/9 EE reported feelings of doom, panic attacks and anxiety. EE was seen and filed a claim for workers comp. The claim is denied pending medical investigation. Ee diagnosed with PTSD.
220261730014M13648Ee reports working in wet ESP at roaster with improper ppe 9/22/25. Alleges mercury got in right eye twice and also exposure through inhalation. Ee diagnosed by DO on 6/8/26 w/ mercury toxicity and cervical radiculitis. Ee filed claim for workers' comp on 6/9/26. NGM has no biological monitoring evidence of exposure leading to removal from work area for this ee.
220261730015M11403Employee reported having cramps and was sweating profusely. Was taken to the ER and given IV hydration. Taken off work the following shift. 
220261730016M11754Employee was cleaning out a ditch in front of the lab and grabbed a bag of cement to carry over to the ditch hole when EE lost EE's footing and felt EE's knee and ankle twist.
220261730017M11524A 480v electric cable sparked and burnt HDPEE pipe and some timber. It was immediately extinguished but smoldered until mine rescue fully extinguished. 
220261730019M13157Employee was hand scaling a rock in the back, a rock fell striking the scaling bar, which caused the scaling bar to strike employee in the neck and jaw area. Employee was sent to emergency room, no muscular or skeletal injuries were found but employee was told not to return to work until EE was seen by specialist.
220261730020M10842EE lifting hose out of tunnel pinched finger between fitting and egress ladder rung.
220261730022M11293Miner was on foot scouting a new drill pattern. EE bent to pick up EE's wheel chocks and felt a muscle pull in EE's back muscles.
220261730024M10572Elevator stopped between floors with two miners on board.
220261730025M12476Ee reports numbness/tingling in rt hand/fingers for 2 weeks. Symptoms wake EE up. Fingers swollen. Ee also reports tingling in lt hand/fingers, not as bad as rt. Ee operates a shovel, suspected diagnosis is carpal tunnel. Referred to hand surgery.
220261730026M12997****  This injury was only a 1st Aid incident initially, but EE was prescribed PT on 6/17/26.  While digging out large rock on quarry floor, the loader bounced and EE's shoulder popped.  This was not a result from any deficient equipment, simply shifted material while properly operating the loader.
220261730027M13688EE was cleaning under secondary with dingo. EE pinched left wrist between the dingo and plant structure. Our telehealth service was called, and they determined the injury first aid. The telehealth followed up with EE several times. On 6/15, they recommended EE go to clinic. Clinic put EE on restricted duty with EE's left arm until 6/30. X-ray showed no broken bones.
220261730030M12255Employee was moving a a section of HDPE pipe with the aid of another employee. While stepping out, the employee caught their foot on the stack of pipe causing them to fall, while bracing the fall they injured their right arm.
220261730032M11884EE started cleaning the tower at the throat. EE went to close the lower west door and some material came out of the port onto EE's gloved right hand. This caused a burn on EE's right hand.
220261730035M11794Mill tech was using impact wrench to remove bolt. Fingers slipped and EE's fingers were pinched between the wrench and a beam causing two smashed fingertips that required sutures.
220261730036M11494Our coworker experienced a medical emergency while getting into EE's personal vehicle.  EE later succumbed at the Lehigh Valley Cedar Crest Hospital.
220261730038M13698EE walked up the stairs inside the Core Building when EE tripped on the third step, fell forward and used EE's right hand to catch self.  EE struck the staircase with a clenched fist.  EE noticed swelling on EE's right hand and immediately reported EE's injury to EE's supervisor. EE sustained a closed displaced fracture of neck of fifth metacarpal bone of right hand.
220261730039M12165A sampler tech employee was walking to throw away a wooden pallet into the bin by the Sampler Shed when they stepped onto some soft ground causing their right ankle to roll. Employee went on restrictions on 6/9/2026.
220261730041M11975Employee started to dismount a Trackhoe and stepped on a rock, hurting their left ankle. Employee was put on restrictions 6/14/2026 and returned to work, able to work at full capacity on 6/15/2026.
220261730043M13257Employee was trouble shooting soda ash plugging issues on the soda ash chute and dryer bucket elevator in the GR3 Dryer Elevator Pit. Employee cleared hot soda ash away from the west dryer elevator.  While standing by the west dryer elevator, the pile of hot soda ash suddenly flashed, burning employee on both arms and legs.
220261730044M12385Maintenance employee performing routine rounds in the Morenci canyon crushing plant. The employee began to feel lightheaded and was attempting to sit down when suddenly they lost awareness. The employee quickly recovered and got back up. 
220261730046M12656The Rubber Tire Dozer operator pulled off the haul road to allow traffic to pass. During this time, the equipment encountered a pothole, resulting in the operator experiencing pain in the lower back and left shoulder. The operator went on restrictions on 6/17/2026.
220261730048M12145The repair crew was replacing main frame liners in Sandvik cone crusher when Miner reached down to apply upward pressure on a liner which had already been tacked in.  EE felt a pop and experienced pain in EE's arm.
220261730049M11293An employee slipped and fell while changing the skirts on a conveyor.  EE sustained a chipped tooth and a laceration to EE's lip.
220261730051M11433During an inlet sweep, the employee turned on the water, and the hot material blew back and got underneath the employee's gloves and burned EE.
220261730052M12195Employee was addressing a Jam in the jaw crusher.  When the rock that was stuck in the jaw bounced, striking the rock guard on top of the Jaw Crusher causing guard to Bounce and strike the employee in the right forearm.
220261730053M13097Employee was driving the Probe truck past Drill 10 and believed the space was tight. EE contacted the Pit Foreman, who confirmed there was enough room. A wet area caused EE to move closer, and the truck equipment contacted the drill. EE reported the incident; minor damage occurred. No injuries were reported.
220261730057M12977Employee was cleaning material off the RoadHeader machine belt when they felt a "pop" in their ribs/chest. Employee was seen at local ER and released with no restrictions; employee was seen for follow up appointment and received restrictions and is off work until their next follow up appointment.
220261730058M12115Employee twisted EE's knee while stretch wrapping a core pallet. Employee was taken to the hospital for evaluation, negative xrays and was told the employee sprained EE's knee and was released on restricted duty
220261740001M12776On Tuesday, June 16, the R-Line 2 filling operator, at approximately 9:30 am, tried to lift a sack that EE did not fill properly from the left nozzle, injuring EE's left shoulder, causing strain of unspecified muscle, fascia and tendon at shoulder and upper arm level, left arm
220261740002M11133Employee was baring out S1 chute hit right shoulder, went to continue to bar when EE felt a pop in EE's shoulder.
220261740005M11423Miner reported that their shoulder was hurting and believes it was from swinging a sledge hammer while changing out the pins on the stab shoe.
220261740007M11874Employee was operating Splitter #5. There was a piece of stone stuck in the machine and belt. Employee went to remove the stone piece, and EE's finger on EE's right hand was pinched, cut.
220261740009M13478While picking up at the end of a shift (06/10/2026) the employee felt a scratching in EE's left eye. EE didn't think much of it and went home without reporting it to management. On the morning of 06/11/2026 at 07:00 am it was reported that EE had a foreign object in EE's left eye. TQC safety took EE straight way to App. Eye Center for treatment.
220261740011M12556Ee boarding RH shovel boarding ladder when another ee activated the ladder, resulting in the injured ee being struck by the ladder below EE's ribs. Ee fell to ground, landing on right wrist. Xrays negative, diagnosed contusions, released to modified duty.
220261740013M12015Production operator was climbing vertical ladder on left side of 707 loader to find missing key chain.  As operator was climbing loader, EE felt a pop on the top side of EE's left arm, below the elbow.
220261740014M10622EE was removing a wear pad when it fell landing on EE's thumb.
220261750001M12305The secondary cone overflowed and catwalks had to be cleared of roughly 20-30lb stone. At 12:45pm while removing the stone, EE lifted and twisted to throw the stone off the catwalk. EE sprained a ligament in EE's back as a result.
220261750004M10572Employee picked up a tub of water and tweaked their back.
220261750005M13638Employee was ascending the stairs in Office Building keeping three points of contact. While approximately on the fourth step, the employee lost balance and fell backward down the stairway landing on the lower floor level and reported pain and discomfort to the hand and tailbone area. No slip, trip hazard, obstruction, or defect with the stairway was identified.
220261750006M11704Employee was holding the corner strap on a metric ton bag to assist the forklift operator with picking up the bag when their finger was caught between the strap and fork.
220261750007M11454Employee tripped while walking between the motor and handrail to assist a coworker and fell onto the grating, resulting in a pinky finger injury.
220261750008M12295While moving a diesel fan, the trailer disconnected from the truck. In the process of reattaching the trailer, the trailer shifted and started to roll. The miner rolled out of the way of the trailer and dislocated their shoulder.
220261750009M11163Employee was inspecting an oil leak under a loader. They strained their right side while climbing out to their feet.
220261750010M13668The employee entered the feeder/jaw area with fall protection to remove a large boulder that could not be crushed. After accessing the area by lifting a safety gate, the employee began clearing smaller rocks. While sitting down taking a break to drink water, they accidentally contacted the gate, causing it to fall onto their left knee and resulted in a laceration.
220261760001M11123An Unplanned Fall of Ground occurred at the 4725 - 102 Axs.  No injuries or entrapment occurred from this event.
220261760002M11614El empleado alega que se cayo por las escaleras del cuarto de controles mientras realizaba sus labores de trabajo, (fractura en dedo indice de la mano izquierda)
220261760003M10081Wash out
220261760004M12335A maintenance journeyman was using a cutoff wheel grinder at Quarry Belt #5 to cut a guard bracket. A fragment from the disc struck the employee's left knee, causing a 2-4 inch laceration. The employee was treated with nine stitches.
220261760005M11183On June 19, 2026, an employee was descending a fixed ladder on a crusher when EE lost EE's balance and fell to ground.
220261760006M13378EE was holding a metal pipe for another coworker to weld on a stand pipe.  EE was wearing tinted safety glasses while holding the pipe and said while turning EE's head the other Co-worker struck the arc to do the tack weld the arc caught the corner of EE's eye. EE had redness in EE's eye from the arc flash and needed medical attention.
220261760008M12927The employee was welding a wear plate inside the bed of a haul truck. After completing a weld, the employee chipped off slag and was visually inspecting the weld when a hot piece of slag rebounded and struck the employee in the eye, resulting in an eye injury that required medical evaluation
220261760009M11223EE was identified as having a STS after an audiometric tests revealed a threshold shift greater than 25 dB's in both ears.
220261760010M13137An employee sustained a laceration to the left pinkie while closing the front gate. The injury caused significant bleeding. They were transported to urgent care where they were referred to the ER. The finger was fractured in two places and required seven stitches. A follow-up with a hand specialist is scheduled.
220261760012M11383Employee went to kick a rock off the deck of a truck. Momentum caused them to fall backwards and got their arm entangled in the arm rails.
220261760013M11904Employee tripped on pile of waste product between the change house and maintenance shop. Team member reported hitting their left knee on the ground and stated they wanted to be seen by a Dr.
220261760014M12987The miner was raking ash at the discharge end of a rotary kiln when the kiln emitted an outward dust puff. The sudden release of material caused airborne lime dust to contact the miner's right eye. The miner immediately experienced irritation and later was diagnosed with unspecified conjunctivitis
220261760016M12075A Mechanic injured right bicep during unplanned repair. They felt/heard a "pop" while lifting and aligning fender with pry bar. Continued work briefly; pain worsened. The injury went reportable on 6/24/2026.
220261760017M12876Employee reached across the bag sealer to adjust the sealer height. The employee had their arm extended while operating the adjustment handle. While operating the adjustment handle the employee felt something pull or tear in their right arm. The employee was diagnosed with a torn bicep.
220261760019M12596Employee exited truck without putting truck in park. Truck started to move and employee tripped while attempting to stop the truck. Truck came to a stop by berm. Employee failed to implement emergency brake and chocking tires. Original diagnosis was First Aid
220261760022M12907Employee 1 and Employee 2 were manually moving a stacker base approximately five feet.  During the movement, one adjusted their body position and footing. While twisting and repositioning, they experienced pain in left knee.  The employees safely set the stacker base down and stopped work.
220261770003M11774Mid-shift truck did hour-long regen burn. Bad smell caused headache. Soon afterward another burn started up. This time threw up. Finished shift in another truck then went to ER.
220261770007M10532The hoist operator reported the hoist was inoperable.
220261770009M11403IP was prying mill balls out of the finish mill #5 screens when one of the balls shot lose and struck IP in the mouth chipping front tooth. 
220261770012M11023The miner smashed EE's finger with a rock while clearing a head box on conveyor C21 at the main plant.
220261770014M10562Employee cut left thumb while cutting a piece of steel. 
220261770015M12005Foreign object in left eye while observing equipment. Flushed eye at the time and continued until the next morning. Employee was taken to the eye clinic the next morning when they reported the injury.
220261770016M12576Struck by/against fixed structure that gave way to a tensioned come-along. Employee was struck in lower back, causing bruising and pain in the area. The injury was at a tolerable level and could be managed with home care. No other persons/equipment effected
220261770017M11784Employee was using a 4-pound hammer to tap in a snubber pin on a shovel dipper. A piece of fly metal from the pin struck the employee on the right cheek and caused a laceration. 
220261770018M11183Die grinder sparks ignited cleaner residue during mounting hole alignment on a Hitachi EX5600 which caused hand burns.
220261770019M11624Employee had the expando rail up in the air and took a step while holding the expando rail and stepped in a hole then the expando rail struck their left shoulder.
220261770020M12345EMPLOYEE WAS MOVING A OIL TOTE FROM UNDER A HAUL TRUCK WHEN THEY LOST BALANCE ON LEFT LEG. THEY WENT TO SUPPORT THEMSELVES WITH RIGHT LEG AND IT GAVE OUT CAUSING THEM TO FALL INTO THE TRUCK TIRE ON THE LEFT SIDE OF THEIR HEAD AND EAR.
220261770023M11474Employee was removing a hatch door on machinery when it came loose and dropped and pinched left pinky finger between the hatch and a beam below it.
220261800003M12085While putting a conveyor inspection plate back up, it slipped and dropped to the ground and swept the feet out from under a miner causing the miner to fall onto their shoulder. This occurred at ground level. 
220261800007M12546Injured was cleaning walkway with water hose when slurry splashed back below EE's safety glasses.  While attempting to wipe off of EE's face, some entered EE's eye.  Injured rinsed eye but required medical attention on 6/18 when condition didn't improve.
220261800010M12786At approximately 1145, a contractor was filling a water truck and began closing a valve after the truck was full. While applying force, the valve handle broke, causing the contractor's arm to move upward and strike an adjacent valve, resulting in a laceration to the left elbow.
220261800013M13548Employee was standing on the blade arm mount on the D8 bulldozer fueling the dozer. While trying to fuel the dozer employee was holding the bracket on the side of the dozer to balance with one hand and the fuel nozzle with the other they slipped off and fell 30". Employee landed on their feet however they hurt their left shoulder when they slipped off.
220261800015M12355Miner was removing a MAWPS from a loader bucket. When EE struck the MAWPS with a hammer, a shard flew off and struck EE in the face causing a laceration. Miner received three stitches, a tetanus shot, and returned to work on full duty.
220261800018M12145The employee was lifting a tool bag (approx. 45 lbs.) out of the back of a stake body truck, turning and placing it onto the ground when they felt a pain in their abdomen. The employee sustained a strained abdomen.
220261800023M11684While picking up a small railing, they slipped and fell at the welding deck. Their left lower side of their back is the affected area with pain radiating into left leg.
220261800025M12746EE was working on Pellet Plant plugged sump pump, feet became stuck in place due to suction (water/mud) caused them to tilt forward 1-2 ft. towards handrail of surrounding the sump. EE stopped themselves with left hand on the handrail resulting in pain to left arm/shoulder.
220261810001M10952Employee was changing screens on TSK triple deck when EE received lime burns to chest and back.
220261810002M13808electricians were attempting to restore power to the Line 2 Clinker Cooler main switchgear when an arc flash occurred. switchgear doors were closed but gaps along the sides of the panel boards allowed radiant heat to escape from the equipment. while positioned slightly to the side of the switchgear, the employee sustained burns to exposed areas of the neck, left wrist, and ear.
220261810003M11063After working on the wash screen, the team member was stepping down and stepped wrong and turn EE's ankle.
220261810005M11403EE was climbing on to the bumper of a dump truck to access the engine compartment. While climbing EE heard and felt a pop in EE's left knee.
220261810006M13147Employee was walking on a flat surface with no obstruction. EE stumbled and fell onto a non-slip metal grating. Injury to both knees and EE's left hand. The right knee required 14 stiches, and the left hand required three stitches. There were no broken bones. Employee required a tetanus shot. EE returned to work.
220261810007M13688EE slipped and fell on a clay shed berm for water deflection in wet conditions Friday 6-19-26. Refused initial medical care; received onsite 1st aid (ice/ibuprofen). Reported no pain Sat-Mon, but requested medical care Tue 6/23 due to quad discomfort. Escorted to an appointment same day. Provider requested an MRI; follow-up is scheduled for 6/30. Restrictions given.
220261810008M11293Miner injured EE's left elbow when a shelving unit tipped away from the wall. Became reportable on 6-29-26 when miner had surgery
220261810009M12706Transformer sparked due to a raven coming into contact with electric components causing area to catch on fire.  this was not in the main facility, and there were no injuries.  the facility was not running and there were no miners at the site at the time of the incident.
220261810010M13317Employee was opening an air valve for a tower mill flush water when the valve got stuck. They used their hand to wipe the blade of the knife gate when the knife gate slammed open, catching their middle finger, pinching it. Employee was taken to the clinic, diagnosed with a distal fracture and referred to ortho. CURRENTLY ONGOING.
220261810011M11624During a material handling operation involving a Hydraulic cylinder and employee was struck by the load resulting in injuries requiring offsite medical treatment.
220261810012M13368Personnel were attempting to determine why elevator would not run continuously. Belt was being tightened and tracked. Maintenance, arrived to assist. They reached to belt to feel belt tension. Belt started as they reached in, bucket grabbed their sleeve and pulled their arm in. Damaged shoulder bones. Still getting surgery to correct.
220261810016M12456Employee was trying to clear a blockage of concrete from a metal tube. They struck the bottom of the tube on a rock trying to dislodge a chunk of concrete, resulting in water and concrete splashing under their safety glasses and into their eyes.
220261820001M13788EE was performing maintenance on an excavator to include changing a hydraulic hose on the boom. The hose was still pressurized when the EE attempted to remove it, which resulted in hydraulic fluid spraying onto EE's left bicep. EE immediately notified EE's supervisor. EE rinsed the affected area with soap and water and changed clothes. EE was sent  for medical exam/clearance.
220261820003M13758While attempting to repair a leak on the antiscalant line, the EE was inspecting the piping to determine the correct diameter and obtain the appropriate fittings for the repair. The EE released the line, causing it to suddenly recoil and whip back. As a result, antiscalant solution was splashed toward the EE's face, bypassing the safety glasses and entering EE's right eye.
220261820011M11894Employee cleaning dust off ground with air hose and lance, as employee stepped over truck guide, they tripped.  Causing the person to make contact with a SafeRack pedestal with right knee. 
220261820015M10732employee smashed hand when boulder came dislodged inside primary crusher.
220261820028M12726EE reports they were starting a conveyer belt and it wouldn't start so they were walking check the emergency stop cables and they were walking down the line and they stepped in some slippery material and they fell and hit their butt and right elbow on a piece of concrete.
220261820029M12756While traversing uneven, wet ground, employee lost footing. They used their right hand to brace themselves from the fall.  In doing so, their right hand and/or wrist experienced elevated strain. Employee initially said they were okay, but a few days later sought medical aid.
220261820031M12275An operator exited the loader and was briskly walking to a control panel to shut off a feed hopper which had a rock stuck in the door when they rolled their ankle. The rolled ankle caused an avulsion fracture to the left ankle.
220261820032M13818Conveyor went down due to being overloaded and they commenced to clearing the belt off to get back running when employee was repositioning feet they caused them to fall down on the rock surface below conveyor landing on their back onto the loose rocks. CT scans and x-rays determined they had compound fractures in their T1, T11 and T12 discs in the back along with a bruised lung.
220261820035M11343The employee was cutting a hose with a utility knife when the blade passed through the hose and lacerated the employee's right forearm
220261820038M13067EE had hit a neutral line with their raised bed. EE states they jumped from the truck and hurt their left ankle but did not report the injury to any supervision. We found out 4 days later and were unable to conduct an investigation due to EE retaining an attorney. This is why this report has been delayed.
220261830002M107923rd party audiologist confirmed a hearing reportable hearing shift on 6/24/2026
220261830003M11544During a review of audiograms by an audiologist on 6-24-26 it was reported to us that the employee sustained a reportable threshold shift in EE's hearing.
220261830004M11544During a review of audiograms by an audiologist on 6-24-26 it was reported to us that the employee sustained a reportable threshold shift in EE's hearing.
220261830005M10993While working on water line employee reached into tub to thread a pipe and felt EE's back give out.
220261830007M11534Employee stepped on uneven ground, resulting in a trip and forward stumble. The employee landed on their right knee. Injury went reportable on 6/20/2026.
220261830008M12325At shift change, employee was riding in the back of the man van when the driver hit a pothole and employee was jostled in their seat, claiming bruises to the head and leg. Employee was taken to the ER and currently off work. ONGOING
220261830009M13488EE was leaving dry and they high fived another EE. Reported immediate hand pain. Seen at clinic 6/18, did not file a C4. On 6/25 EE went to Hospital and filed a claim for workers' comp. Referred to ortho who did previous surgery. X-rays shows issues with screws and plates from previous surgery. Both providers noted this issue is non-occupational.
220261830010M11484Miner squatted down to seal a manway cover on a railcar and felt something pinch in their lower back area causing pain that increased over time.    
220261830011M11935Employee was working on a haul truck. When they completed working on the inside of the haul truck the employee stepped down and rolled their left ankle. The injury went reportable on 6/23/2026.
220261830012M10622While walking to line out, employee rolled an ankle on a rock.
220261830013M11183Lube operator was doing their 2nd round of lube and did not feel good due to heat. Event went reportable on 6/24/2026.
220261830014M11945EE was operating an aerial lift around the plant when they ran over some uneven ground the platform produced a sudden movement causing the EE to strike their left knee against the railing frame.
220261870003M12165Miner while doing material removal at ground level of Finish Mill 2 building, employee reported shortness of breath and throat felt like it was closing off. EE was wearing a dust mask N95 together with a neck gaiter.
220261870004M13327While opening valves the employee experienced symptoms of lightheadedness. Coworker assisted the employee to office first aid was provided. Condition did not improve and EMS was contacted. Transported to the hospital for evaluation. The miner was admitted to the hospital on 6/25/26 and discharged on 6/27/2026 with no restrictions.
220261870007M11454While dismounting from the Caterpillar 775G haul truck, the miner lost their footing when on the ground and fell. Miner suffered sprained ankle. 
220261870009M12446Ee reports stepping onto bolter to turn off pressure washer. Stepped up w/right leg and felt immediate pain/burning sensation. Seen at Golden Valley, diagnosed with shin splints (right medial tibial stress syndrome). Released to modified duty. 
220261870011M13508Material from a broken bag was on the conveyor line. The employee stopped the conveyor and was pushing material down between two conveyors. The employee turned on the conveyor while EE's hand was still in the material. The employee's hand and arm were caught in the conveyor. The employee's hand and arm sustained swelling, bruising, and an abrasion.
220261870017M12185Employee was installing the eye flush piping at the filter building. While tightening a bolt the swivel adapter on the impact broke. The pin from the swivel adapter cut the employee between the index and middle finger.
220261870019M13287An Equipment Mechanic was performing maintenance on a loader pin when an impact gun struck EE in the chest. The employee was evaluated following the incident and, on June 24, 2026, was re-evaluated by a medical professional. During the follow-up evaluation, prescription medication was provided to treat the work-related injury.
220261870020M13037EE was changing hardware when right ring finger was pinched. Five days later, EE went to doctor and was diagnosed with an infection in the finger. It was cleaned and dressed, and EE was prescribed antibiotics. EE missed one shift following doctor's visit and after returned to work without restrictions.
220261870021M12486While a CAT 777 truck was pulling away after loading, a CAT 992G loader bucket contacted the top of the truck's box. The unexpected impact caused the truck operator to tense up and shift abruptly in their seat, resulting in reported mild back pain.
220261870022M12446Lost power to all surface and underground operations, which caused us to lose hoisting capabilities. Issue was within the city of Cleveland. Notified Cleveland Public Power (CPP) of issue and proceeded to evacuate mine until power was restored.
220261890005M11073While changing a roller frame on screen, employee was leaning over frame to lift roller, straining shoulder
220261890007M11584A miner was installing a 6-inch 60D nail into a board. The miner missed the nail and struck their left thumb causing a crushing injury that required stitches.
220261890008M13167An employee identified a rock in front of the inner dual tire of a parked haul truck. After communicating with the operator and confirming the truck would remain stationary, the employee attempted to remove the rock to prevent potential tire damage. During the removal attempt, the employee sustained a bicep injury.
220261890015M11464EE was sitting in boat and lost balance for a second reached out to steady self, grabbed dredge and didn't know boat was that close and cut thumb.
220261890016M12506The EE was attempting to dislodge a rock in the crusher with a pry bar, when the rock came loose, the EE caught their right pinky finger between the pry bar and the edge of the crusher. This resulted in the EE receiving a fracture on the right pinky.
220261890017M11614The EE was attempting to dismount the Cat 966 FEL, when EE slipped and fell approximately 6 feet. The EE suffered A back injury which required medical attention.
220261890019M12436Dozer Operator slipped and fell between the track and side frame as EE was dismounting, injured right knee. Injury type changed from First Aid to Medical Treatment due to referral to physical therapy at 6/26/2026 medical follow up appointment.
220261890020M13257SX/EW Operator Trainee felt pain in EE's right arm at the end of shift on 1/2/2026 after running Overhead Crane/pressing in the tank house for most of the day. Late reported 1/5/2026. Exacerbation of pre-existing shoulder condition, injury type changed from First Aid to Medical Treatment due to referral to physical therapy.
220261890021M11373Employee got an index finger injured between two pieces of metal when they tried to remove a jammed rock with index finger on right hand.
220261890030M10672Utility power outage caused the production hoist to be unavailable.
220261890032M12065Was driving down pit ramp and got jarred when hit a soft spot. Did not report till after shift. Did not seek medical attention until 06/29/26. was given full release. follow up on 07/06/2026 was put on TTD.
220261890035M13708On 6/24/2026, approximately at 10:57pm, an employee was working at our Pressure Deferential (PD) Rail Car unloading station when they tripped between track 4. The employee was wearing a hard hat as required, it came off during the fall and subsequently the employee struck the right side of their head on something. The employee sustained abrasions to the forehead area.
220261890038M12406was airing down tire and ice chunk came out and hit them between thumb and pointer finger. did not report right away. went to Dr 6-29 was given full RTW. went on 6-30 and was given full RTW. went again on 7-6 and was put on restricted duty.
220261900003M11544Employee pinched right middle finger between plate and wear liner, amputating the top portion of the finger midway on the nail bed, above the top knuckle.
220261900006M12927Employee reported progressively worsening bilateral hand discomfort with persistent numbness and tingling beginning in the middle fingers and radiating into the forearms, often disrupting sleep. Employee was diagnosed with bilateral carpal tunnel syndrome; prescribed prednisone 20 mg and PT.
220261900009M11995EE was running the rock breaker while breaking a knot when the excavator jarred sharply. This sudden sharp movement tweaked something in their back. The did not seek medical treatment until July 2nd.
220261900018M11193EE was unhooking a 3 inch flat water line from the water truck, and the EE stepped back and tripped and fell to ground.
220261900021M12516Employee was performing maintenance on the skid steer. The cab of the skid steer was raised. The door was left open when raising the cab. The door closed on the employee's finger. The tip of finger was lacerated and the fingernail came off the finger.
220261900023M10612EE was grinding on rusty metal, and dust went into EE's eyes.
220261900024M12165The EE was cleaning by the water tank and as EE looked down, EE's glasses fell. As EE attempted to pick up EE's glasses, EE struck EE's forehead against a metal chute. This injury required stiches to close the wound.
220261900026M11143Employee operating Cat 775 haul truck was leaving River Bench Pit when they felt a sharp pain in their lower back.
220261900027M10782Employee grabbed the frame of the conveyor belt which shocked EE's right hand.
220261900029M11143While inspecting equipment at the crusher a foreign object entered left eye. Taken to ER and material was removed.
220261900030M10822Haul truck driver said EE was bouncing in EE's cab and felt pop in EE's upper back
220261900031M12265Miner was looking for an electrical issue on a ladder.  EE missed a step on the way down and fell 3 rungs to the ground landing on EE's shoulder.  EE was shoulder and dislocated it.  EE was carrying a flashlight in right hand.
220261900034M11474EE operates a CAT D8 Dozer on a daily basis which involves repetitive motion. EE experienced discomfort and was taken to the doctor for evaluation.
220261900046M12385Employee was working on an airslide that transports kiln feed. When they went to close the port on the airslide kiln feed went up left sleeve and some dust got into right eye. They were given restrictions on 06/26/26 for their left wrist.
220261900053M13788Employee was loading a goat shot (side of mountain up hill) with 40lbs buckets, after they were done, they wer experiencing pain on the left shoulder, reported it to HSE and declined medical attention. On July 6 they went to get checked at the hospital, x-ray revealed calcination of the shoulder joint and given a steroid (cortisone) injection to help with pain and discomfort.
220261900055M11283Employee injured right bicep while lifting pump out of crate. Injury became reportable on July, 2nd 2026 due to restricted work.
220261940002M12005Miner personally in a hurry and tripped on a toe board edge properly placed.  Miner fell and rolled onto scaffolding tubbing staged in the area.  Miner received a lower back injury, wound/ laceration.
220261940012M11133Employee was walking section belt line when EE tripped on cable; tried to catch self and injured left hand/thumb.
220261940018M13097a loader operator, was climbing down from the 980H loader, as they stepped down with left foot they felt a wobble. The next morning their left knee was tight and stiff. After receiving the MRI results, 7/10/26, it was determined operator has a slight meniscus tear. This is why it wasn't reported prior to now
220261940023M11634The worker was trying to shut an entry door that broke and the door handle hit them in the right side of their ribs. Didn't meet reportable criteria until 7/3/2026
220261950007M12646Employee picked up the conveyor belt to slide it over and tighten bolt overhead.  EE used EE's arms and head to push the belt up and over.  After moving, employee turned EE's body and felt a sharp pain in EE's lower back and had pain standing, sitting and walking.
220261950024M11464EE was attempting to free material with an air wand and felt a pop in right shoulder area. Reported late because no pain was felt for a few days. 
220261950025M12776Operating dump truck they hit a hole and felt pain in their right knee that went up their right thigh to their lower right back. Initially refused medical. 6/10 complained of pain. 6/11 claim investigation by insurance. 7/10 deemed work related. 7/13 saw Doctor out until 8/24.
220261950032M11734Employee was using an impact gun to loosen a carriage bolt on skirt board. Left middle finger made contact with the sharp bolt head, ripping through the cut resistant glove.
220261960017M12125Employee was using folding style utility knife to rubber to fit around dual screen chute when the knife slipped causing right hand to contact left hand and causing a laceration between left thumb and index finger
220261960019M13267Employee was in the excavator and driving it backwards down a dirt slope with their neck turned watching behind them and it bounced and popped their neck. At first they didn't think much of it and thought the soreness would go away and it continued to get worse. forcing them to eventually seek treatments from a Chiropractor.
220262010009M11794Employee attempted to move a drill steel and felt a pop in the left elbow. Was not reported until one week later. Injury became reportable when surgery was performed on 07/08/2026
220262010013M11293IP was putting ISA mill back together from an inspection. When tightening a bolt they felt a slight give in their right shoulder.
220262020014M13347Employee was in the process of tightening a belt on a conveyor. When the employee finished tightening the belt, they made a comment their hip felt uncomfortable to their supervisor. The employee notified the safety department on June 17th (6 weeks later) that their back was hurting and they had already received an MRI and Cat Scan. 
220262020030M13017Employee and assisting employee were installing plywood on the 7XC VAD door. While placing the nuts on the sandwich plates, they had just finished the last one on the center of the door frame. While reaching for a tool the employee overextended their elbow causing a pop sound and pain in their elbow.
220262020035M11143Employee was removing the gearbox on the hydro pump on the pit dredge. When they removed it, it fell on their hand
220262040004M12095Employee took an audiogram test on 5/26/2026 and had a reportable result for EE's left ear.  Employee was scheduled to complete an audiogram retest on 6/29/2026.  Employee declined to be retested on that date.
220262050001M10461large piece of granite fell on ee's right leg.
220262050004M10301Metal plate fell on right foot
220262080012M11914On June 25, 2026, an employee sustained a forearm injury from a metal shard while realigning a wedged tail pulley bearing, which later required surgical removal and stitches on July 15, 2026.
220262080013M137986/8, ee replacing skirtboards on conveyor; struck left elbow on frame when getting down. Did not report. 6/20,ee picking rocks off overloaded belt and aggravated injury. Both incidents reported on 6/22-ee asked to seek medical treatment; treated and placed on work restrictions. Delay in reporting due to investigation to confirm a work-related injury on account of no reporting.
220262100011M12385Hitting the discharge chute to loosen material, EE stood on top platform of a 3 ft. ladder while beating on the chute which ultimately caused EE to lose EE's balance. EE was able to land on EE's feet, but EE landed awkwardly on EE's knee.
220262100019M10983Removing stuck rock from tire tread-potential tendon damage-reported to safety 52 days post injury
220262110015M13758Miner was releasing a chain come along to relocate. The come along needed more slack in the chain to continue to move the tripper back to the north. During operation the tripper will walk back to the south. Miner thought EE had enough clearance to slide EE's hand in to relieve the safety latch and the tripper took off walk to the south. pinching EE's hand to the structure.
220262110016M11874natural causes due to heart attack  EE was a customer only, not an employee. 9:30 is an estimated time, the exact time is on a loader ticket that MSHA investigator has in EE's possession.
220262110026M13718Employee was performing clean up duties in the induration thickener pump house. Employee pulled hose to go around corner when they slipped and fell causing pain in their left knee. Incident exacerbated a recent a non-occupational injury involving same knee. Employee fully accommodated within department since incident date. Employee received medical treatment 7-16-2026.
220262110031M12205Employee was setting brake on rail car when felt discomfort in shoulder. Employee refused medical care until 7/7 and was referred to a specialist. Employee was seen by specialist on 7/29 and Diagnosed with shoulder tear.
220262150006M13468A miner was bolting a grate on the bottom side using an impact wrench while holding the other side with their other hand. The impact wrench jerked causing their wrist to twist. On 7/23/2026, the injury had not improved and the miner went to an occupational clinic for evaluation where they received restrictions and a wrap for the injured wrist. 
220262170001M13297EE was lifting 24lb DEF fluid container at chest height, filling DEF tank, when EE felt a pop in EE's RT shoulder. EE sought treatment and we received the medical records on 7/29/26 in which EE was diagnosed with a right rotator cuff tear. EE was not given any restrictions. EE continues to work. Surgery is scheduled for 9/1/26.
220262190005M12957The miner was leaning over a piece of equipment while cutting a bolt with an oxy/acetylene torch when hot slag entered EE's right ear. The miner was treated and released to work with instructions to keep the ear clean and dry. EE was referred to another doctor for removal of the foreign object.
220262190008M10792sustained laceration to R hand and thumb while adjusting guard on angle grinder
220262190013M12065The gate to the Tire System was left open and the heat from the kiln caught a tire on fire which lead to the belt line.  We were able to contain the fire to the system itself and no other area was affected.
220262190023M11504Employee was exiting a man van and as they put weight onto their right leg, they felt a pop in their right knee. The event went reportable 07/28/2026.
220262240010M11814Injured Employee was assisting with a belt change when EE's glove was caught between the belt and the pulley, resulting in a fractured finger and an torn nail, exposing the nailbed.
220262290023M13408A parent company EE was attempting to remove a ladder rack from company van on SMS property and felt a pull in right shoulder. Incident was reported same day but did not require a dr visit at the time. Injury has not improved since date of incident so EE had an MRI and will need surgery. EE is currently on a 15lb weight limit restriction.
220262320022M13738Employee was installing a liner for the course ore feeder when the end of liner dropped and pulled the employee's right arm down and away from their body. The employee felt discomfort in right shoulder and returned to work. Employee worked full duty until receiving shoulder surgery on 8/10. Employee has a history of non-occupational right rotator cuff injury and repair. 
