220250210037C12155Employee walking down an incline to the boot washroom slipped on ice fell on left wrist. There were steps and a walkway that could use, the employee took a short cut. This wasn't reported till the next day at 9:30am
220250270022C13057At 11:50 AM EE was assisting a Lube Tech whose airline was frozen.  EE provided an air source to the lube tech to complete the job.  As EE was unhooking the airline, EE fell on the ice and landed on left shoulder.  EE was transported to the hospital by the Safety Representative at the Workman Creek Mine.
220250290029C13057Contract employee was filling a 5-gallon bucket of DEF at fuel island for a dozer in shop. On the last of three trips, walking back to vehicle (5-6 ft. away) with bucket, contract employee slipped and fell on snow packed and covered ice. Strong winds were blowing snow clouding visibility to walking path.
220250290049C13147Employee was unloading supplies from the scoop bucket and placing them onto the roof bolter.  When the employee was picking up some bolts, the bolting machine moved, and employee jumped into the scoop bucket to get out of the way and accidentally got their foot caught between the scoop bucket and the roof bolter.
220250300018C12205Employee needed to get a strap under a RAX link pin, so they could lift it up into place. They tried to lift one end of the pin to slide the strap under it. When employee lifted on the pin employee tore bicep and tendon.
220250340028C11313While drilling a piece of the mine rib measuring 12x12 fell from above the work area striking the employee in the back of the head.
220250340035C11955Employee was tramming bolter from ATRS controls. EE walked toward cable reel to check cable, returning to ATRS controls EE smacked knee on fire suppression bottle/bracket and dislocated knee cap.
220250360001C11243EE was bolting top & bent a bolt causing the bolt plate to strike EE's arm causing a laceration. EE was taken to a hospital.
220250380004C13357Two employees from Lester's Steam Cleaning were steam cleaning their steam truck at the guard shack at the end of their shift. EE 2 by drivers' side door, EE 1 behind the truck at back bumper. EE 3 in a different steam truck, backed up to let traffic by coming off the hill and backed into other truck pinching EE 1 between the trucks.
220250380020C12596Employee was throwing block into the scoop bucket.  As EE was throwing a block, EE did not lift the block high enough. EE accidentally hit hand against the scoop bucket because EE's hand was wrapped around the block while in movement causing injury to finger.
220250410020C11153Injured occurred as the employee was using a prybar to move a gearbox and heard a popping noise on EE's right foot.
220250420009C13147Employee was carrying a crib on the longwall teardown face. They stepped into the panline and slipped, catching a foot in the chain. Initially, EE was diagnosed with a sprain and released to work. On 2/4/25, a visit to the doctor revealed a previously undiagnosed fracture to the foot, and they began missing time.
220250420017C10662Miner was laying out explosives and slipped and fell on pit floor.
220250420021C12185Employee was using a jackhammer to hammer at a shelf of coal at knee level. The piece of coal gave way and the hammer struck a rock and bounced into EE's foot. Injury was not the result of training or compliance issue.
220250430011C12225Employee was hosing out a chute on slope belt and there was a pressure change in the hose.  Employee got knocked off balance and accidentally tripped over some belt structure and landed on the ground causing injury to hip.
220250500014C11474IE went under parked haul truck to check it out & got hydraulic oil into both eyes. IE received Rx eye drops and was not released to return to work
220250570012C12406Employee was looping shield hoses and walking by another employee that was removing a staple using two hammers to pry out the staple.  When striking hammer, a piece of metal from the hammer accidentally struck employee's arm causing injury.
220250570013C11744Employee was setting a vertical pin keeper on longwall face and using a horizontal pin to hit it in place.  Employee accidentally hit left finger with the pin causing injury.
220250650014C12596Tire Tech was moving wheel parts around.  Linked the flange ring and the bead seat band together in the hands of the manipulator.  Turned around to lay the remote control down.  The bead seat band slipped off of the flange ring and landed on Tire Tech's foot.
220250690013C12876Employee fell onto employee's proximity pad at the right hip resulting in contusion and bruising to the right hip. Employee was seen the same day and given a full release with no restrictions. During a follow up appointment the employee was placed on restrictions preventative in nature.
220250700004C12155I.E. was getting out of truck to use restroom.  As they were getting out they missed their truck step and was hanging on to the step handle.  While trying to find the step they felt a strain in their right shoulder.
220250700016C10952Contractor bent over a generator panel to change an alternator belt. This caused a back injury.
220250730013C12917Employee was running a come-along, EE thought the handle was locked in. When employee released the handle the tension brought handle back hitting employee in the safety glasses. Employee's safety glasses hit employee's eyebrow and cutting into the skin. Employee ended up getting 5 stitches.
220250760033C13157The accident happened because roof plate and pie pans were picked up by the magnet and employee was working under the magnet and someone was checking the power and turned off the power to the magnet the items on the magnet let loose and fell on top of the employee. A roof plate struck employee in the back of head.
220250770006C12887EE finished EE's train, left the spray booth to conduct post inspections, and proceeded down the stairs.  When EE reached the 2nd to last stair on that first set of stairs coming out of the booth, EE's right boot got caught as EE was taking a step and EE twisted EE's knee in the process.
220250780001C12385EE had been jack hammering to set a water trap for seals and traded off with coworker to take a break went over to rib sat down when rib roll 68"L x 24" W x 8" T came off at spad #3002/7483 on EE striking EE in the chest and abdomen area.
220250780026C11053Employee was washing the head drive area and fell. They tried to catch themselves and fell on their wrist
220250790005C11213Construction worker, While installing Q decking, the employee fell through an opening in the floor resulting in injuries.
220250800002C12526Employees were loading a butterfly valve onto an underground truck.  The valve shifted and accidentally rolled onto employee's hand that was on the bed of the truck. Employee pulled EE's hand out from underneath the valve causing injury to two fingers.
220250800007C12826I.E. and another employee were attempting to chain up a drive shaft on a haul truck to be able to pull the down equipment out of the way. While holding the driveshaft up, the weight shifted and the driveshaft fell on the I.E.'s left hand bending back their wrist causing a fracture.
220250840013C12345Employee was operating a tractor trailer coal truck when they hit a rough spot in the road. Lower Right back began hurting, EE was taken to PMC hospital. The employee was x-rayed, given medicine and taken off work for a strained back.
220250850010C13117Employee was loading supplies onto a roof bolter and felt pain in their back. Injury was not witnessed, and after an investigation, it was decided on 3/19/2025 that this could not be attributed to anything but the work activity the day of the report. Injury was not the result of a training or compliance issue.
220250900036C11534Employee states that employee was dragging ventilation tubing and tripped landing on knee. Employee says that the knee landed on a rock or chunk of coal.
220250920034C11834IE was using a razor knife to prep a cable for a splice and while cutting the outer jacket, the knife slipped and cut IE's left ring finger resulting in a cut that required 5 stitches
220250970011C11584Mechanic was attempting to install a pin into the retaining cable for a Cat 785 rock truck when the cable slipped causing an incision in mechanic's right hand
220250970019C13548Employee was connecting a beam, one side was hung on a column. As employee started to bolt one end of the beam the other end freed up pinching employee's hand with the beam. The employee received a laceration on the middle finger.  Employee was taken to Urgent Care where the laceration was cleaned. A finger splint was placed on the finger, no stitches.
220250990008C12275Employee retrieving a piece of steel plate from plate rack. While bending over another piece of punch plate contacted employee causing laceration to employees left cheek. No Lost time or restrictions.  4 Stitches administered. 
220251010020C13307Employee was taking the top cover off the driver to work on the gear box. The EE was positioning themselves by the machine when they slipped on a hose, which was on the ground, and fell forward. They grabbed onto the guard of the machine, but continued to fall and contacted the ground causing a Closed Fracture to Upper Left Arm.
220251060004C12576Employee was building a stopping, and was tackled to the ground by an employee of a different contracting company, resulting in a shoulder injury. EE continued to work unrestricted until 4/5/2025. Injury was not the result of a training or compliance issue.
220251060026C13688IE lifted the boom of a microtraxx machine. While IE reached in with right arm to check the boom pin, IE leaned on the remote box with chest, engaged the boom down function and lowered the boom onto IE's right arm. IE was trained as a microtraxx operator, but this was a compliance issue, as the machine was not de-energized, locked, tagged, or blocked against motion.
220251110015C13227The repair was on the K pin location of the machine. During the install, the bearing seized roughly a quarter of the way in. To continue, EE used a brass hammer to drive it in. During one of the hammer swings, EE accidentally missed. The left finger got caught between the hammer handle and the bearing causing a fracture.
220251110025C13317The IE had been welding and cutting on belt structure. IE is not sure if metal got in eye or it was dust due to the high winds that day. The IE ended up going to the doctor to get the material removed, after attempts to wash it out were not successful. The IE received eye drops after the doctor removed the materials from IE's eye
220251120002C10301lifting a beam for an overcast
220251120010C11824Employee was tramming coal loader and hit a dip in the road. Employee felt pain in lower back for approx 5 mins. Employee woke up the next day with pain in lower back and hamstrings.
220251180005C13648While operating a scoop, the employee went through a curtain, tearing it down along the way. EE returned to re-hang the curtain that was torn down. Employee stepped up the ladder to finish hanging the curtain, mis stepped and fell backwards to the ground. As employee landed on the ground, EE snapped EE's neck and began to feel pain down EE's spine and right leg.
220251190005C11423IE was working on a conveyor belt, lost EE's footing, and fell. The IE felt pain in EE's back and was taken off work for the pain in EE's back
220251190006C130872 employees were ascending in a man-lift bucket to change rollers on the slope belt. The operator had to tram forward to clear a catwalk, and one wheel of the man-lift sunk in soft material, which caused the lift to tilt. The lift shut off automatically, and the employees were stuck until lowered by the FD.
220251220013C13658IW was installing the transmission in a 988G S/N:BNH01439. Zip tie was wrapped around the male threaded hose fitting that was placed as a marker. Zip tie had to be removed for proper seating of hose fitting. When cutting the zip tie the utility knife slipped and struck them in the lower right leg below calf. They alerted the other tech of incident. IW went to ER.
220251260010C11604Employee was working on a machine and was moving crib blocks. While moving them, the tech felt a pain around their navel and there was some slight inflammation.
220251330009C12626Employee was installing a piece of sheet metal inside a feeder when EE pinched EE's left middle and ring finger between the sheet and frame of the feeder.  The employee was wearing gloves at the time of injury.  The injury resulted in a fracture to both fingers.
220251330013C11494While pulling old conveyor belt off and pulling new one on the a frame pulled loose landing on employee's foot, this caused two metatarsal fractures.
220251340006C13347The employee was manually operating a GOAB switch when an overhead porcelain insulator broke into multiple small pieces. One piece fell and knocked off the employee's hard hat. A second piece fell and made contact with the right side of EE's head, near the hairline, resulting in a laceration that required medical glue for treatment.
220251340016C11413Employee was climbing up onto equipment and pulled muscle in their left shoulder. Employee had same injury and surgery on same shoulder 8/23.
220251340026C12255Individual was grinding welds with a grinder. A small piece of metal worked its way under the individuals safety glasses and face shield into their eye. Medical personnel removed the debris and prescribed Ophthalmic Ointment.
220251390017C12967This was a fire contained to a wheel on tractor trailer coal truck. While setting in line to dump EE's load of coal it was noticed that the drivers off-side rear wheel area was on fire. It was fought with extinguishers and the local fire department was called to completely extinguish the flames.
220251400005C13658Employees were performing work tasks not focusing on other job tasks occurring around them. A group of employees were working on the lower scaffold deck directly below another group. One employee working directly above lost grip on the form ring, dropping their side allowing it to swing down knock their hardhat off and strike the employee in the back of the head.
220251400011C11504Employee was attempting to lift a spool of telephone wire from a storage trailer on the refuse pile.  Employee felt a pain behind EE's right shoulder.
220251400028C11484A contract employee was working to remove a rock from the Bretby loop on the longwall face and their finger was pinched between the rock and Bretby.
220251430006C11163Employee was drilling a 5/16" hole in a 10" I-beam with a 1/2" drill. The drill bit caught twisting EE's left thumb.
220251430014C13598Employee reports that they were packing monorail on the belt line in 6N3 39 1/2 X-Cut. The monorail EE was carrying hit the belt; they grabbed it and went to reposition it on their shoulder. When it hit the existing monorail, it left the piece EE was holding hanging and shoved it down onto their shoulder. Employee then felt a pop in mid-back and sharp pain.
220251470029C12776Employee was cutting a rope off of a tarp off of a handrail. They knelt down and on right knee and started to cut the ripe free and the wind was blowing and they slipped with the knife and cut into their left knee on the inner side above their knee. They received four stiches.
220251470030C11654Employee was cutting up old belt to depose of it. While cutting the knife blade broke and slipped and cut into their left upper thigh. Employee received two stiches.
220251530010C11995EE donned Ocenco DBA 6.5 SCSR as part of routine training and fell unconscious after walking approximately 100 feet. EE was unconscious for approximately 45 seconds. Originally filed 7000-1 5/23/25  
220251530011C11644EE was shoveling at a belt transfer, while in a crouching position to reach under belt EE felt a sharp pain in lower left abdomen which was diagnosed as a hernia.  
220251540011C12917Employee was looking at 988 wheel loader for customer. Machine had electrical problems, Hood on machine was raised, employee was looking at wiring under the hood when hood fell, striking employee on the head, knocking their hard hat off, and striking their ear causing laceration on the ear.
220251550013C11854Employee was working on a belt splice.  While pushing some belt slack together to line up the splice to put in the pin, the employee slipped in the mud causing injury to shoulder area. 
220251560015C12887The employee was assisting in hoisting a beam from a tight space. The beam twisted while they lifted it with a chainfall which caused it to spin into the side of the chute where the employee had their right hand. The employee's hand was bruised with a small cut on the pad of their thumb.
220251560023C11784Employee was cleaning up a belt splice area and employee was lowering the rollout of the belt core.  Hook came off end and the core fell which caused injury to their pinky finger
220251600008C10842EE went to step out of EE's work truck and stepped in a hole and twisted EE's ankle.
220251610001C12586On 5/29/25 an outside vendor sent a shop mechanic to inspect the wiring harness on loader CAT 9888-F. When the employee lifted the motor hood cover up to look inside, the suspension joint failed on the cover causing it to drop and strike employee's left ear.
220251610009C12887Employee was attempting to set a jack in the roof to secure a tailpiece during a belt move. The jack needed lowered for adjustment. When they set the jack down, the employee's hand was caught between the jack and the tailpiece. Injury was not the result of a training or compliance issue.
220251610011C11904Employee was a passenger in a rail mounted mantrip that ran into another mantrip. Employee came out and sought medical attention. Injury was not the result of a training or compliance issue.
220251620010C11784While securing a load to the bed of a service truck with a ratchet strap the anchor point failed. the buckle from the strap struck the employee in the mouth damaging three teeth.
220251670005C12736Worker was walking on 2nd floor of transfer. EE stepped on unsecured decking. The decking slipped and EE fell to the floor below. EE hurt EE's knee in the initial fall and then EE's chest when EE fell over after landing. EE was wearing fall protection but was not tied off.
220251670016C12446The crew was in the process of forming up walls to pump concrete around the steel sets.  Employee was evaluating the roof conditions around the steel set area and unexpectedly, a rock fell from the top area striking employee and causing injury.
220251680006C12897A driver was stepping off truck step onto the lowboy when EE misplaced EE's footing, causing a small fall to the ground. Employee landed on EE's shoulders and struck back EE's head on the ground causing a small laceration on the back of the head, requiring one staple to repair laceration.
220251740007C10993Employee was putting connecting links in face chain and hit EE's thumb with a hammer causing injury
220251740022C11193Employee ducked to avoid a come-a-long chain and ran face first into an overcast I-Beam when they raised their head up.
220251740025C11694Employee was changing out gas bottles and put one on a dolly.  It started to fall off and employee tried to catch from falling and accidentally caused injury to fingers.
220251740026C12155Removed lagging from drive roller and was buffering and cleaning up drum to install new lagging grinder got caught and kicked back resulting in laceration to pinky finger on right hand and small cut on ring finger .
220251750003C11704Employee was attempting to get out of the skid steer. When EE stepped out EE's right boot got caught on the bucket causing EE to fall to the ground and land on EE's ankle
220251750012C12967Contract security guard employee was found in (personal vehicle) with driver's window down and vehicle running with air conditioning on. Security guard was thought to be asleep but when checked was not breathing and did not have a pulse. This is not due to no accident or injury at the mine site.
220251760008C12035Employee was proceeding to advance TG shields from transition as face was advancing and a chunk of coal fell out and hit in the back causing them to accidentally fall forward causing injury to their leg.
220251760009C11644Employee lost the balance of the doors on the forks of the skid steers and got hand caught between the door and headache rack on skid steer causing injury.         
220251770026C12826Employee had been helping change rollers a on a D8T dozer. Employee hooked the winch cable back into the storage loop on the cranes boom, while their hand was resting on the crane loop the winch cable tightened up and pinched employee's left thumb between the hook and storage loop.
220251820009C11534The injured miner was struck in the right ankle by a shuttle car trailing cable as it was being wound onto the cable reel resulting in a fractured ankle.
220251840001C12897Employee was assisting in the removal of a steel beam. While preparing to cut a beam another employee in the man basket struck a piece of steel causing it to fall on the employees leg. EE has a small fracture on EE's patella as well as a laceration above EE's knee. EE is on modified duty.
220251840023C12115Was working on D6T dozer that was down, was climbing down on the left side, holding handrail with right hand and right foot on the push arm, left foot slipped off push arm step, and hit right ribs on the tracks.
220251900012C11193Miner got out of the truck, put the hose down the hole to pump the water out of the drilled hole and their knee popped.
220251900013C12947Employee was driving a scoop, parked it, got out and started carrying beams. They then proceeded to walk up the face with a beam on their shoulder, when taking the beam off their shoulder the person carrying the other end of the beam spun the beam when setting it down, which caused the injury.
220251900023C13798Employee was dragging mine spray with a crew when another employee unexpectedly dropped the end causing a right shoulder strain. This incident did not involve any aspect of compliance with rules and regulations; mine equipment or mining system; job skills and miner proficiency, training and attitude; or protective items relating to clothing, or protective devices on equipment.
220251910007C13708EE was cutting a 2'x6'x10' piece of wood in half. EE was cutting with a circular saw. EE's co-worker was  holding onto one side of board while EE was holding other side. EE had almost cut completely through the wood. The board dropped and EE's left hand slid forward into the running saw blade. EE has lacerations middle and ring finger and EE severed EE's pinky finger.
220251950017C11423Employee was vulcanizing belt when EE attempted to pick up a winch and strained EE's lower back.  The employee began missing work on 7/7/2025.
220251950028C12736Laborer was torquing bolts on a check valve to spec. Their hand slipped off wrench scraping  finger on a bolt..  possibly leaving a piece of metal in the wound. Laborer not realizing. The piece of metal was in their finger. Let it go over the weekend, causing an infection.
220251960018C12766Working in a 2-man crew, driller opened rod clamp while chuck was not engaged with 300 ft of drill rod in the horizontal borehole. Water flow from the borehole pushed the free rods backwards into the helper behind the drill rig, striking their right side and causing bruising.
220251960027C11874Employee was working at the mainline # 13 belt drive when they were injured. Employee was attempting to lift a vulcanizing plate into position when they experienced pain in left shoulder.
220252090017C11704Employee was driving to the Coal pit and hit something in the road, EE was jarred and said EE's back and leg was hurting. Went to EE's Dr. and was given days off to rest.
220252090026C11804Employee was unloading a beam from the scoop. When they went to set the beam down, the rib rolled and large pieces of material struck them in the back, neck and back of their head.
220252100008C12235Employee was found unresponsive. Emergency services were immediately notified.  live saving measure were taken on site.   Employee was taken to medical center via ambulance. EE was pronounced dead at 5:23AM at the hospital.
220252100010C11995Employee was cutting up old belt into small pieces to be able to remove. EE's knife blade broke while cutting towards self and EE struck EE's right leg just above EE's knee. EE received six stitches.
220252100025C12736Employee was working outside in the heat of the day loading holes and became light-headed and slurring their speech. Co-workers noticed a change in behavior and called 911 and medical attention was administered.  employee was diagnosed with heat exhaustion and dehydration.
220252110003C13217EE and the scoop man were going to get the maintenance insert and some oil to take to the miner to service it. EE got in the bucket of the scoop between the insert and the ram. The scoop man backed up the heading and pulled up into 4 right to turn. As they pulled forward the insert contacted the rib, pushing it into EE.
220252110012C11844Employee was pulling cutting motor on longwall with chain and come-along and the hook accidentally broke causing the hook to accidentally strike employee in the shoulder causing injury
220252110021C12295The injured person was traveling down the haul road belonging to River Ridge P-1, 15-19895, to go home when the brakes failed and they jumped out of the vehicle causing injury to their right shoulder and laceration to their head.
220252120010C11794The conditions was hot, damp and clean. The injury was to the left foot at the toe, the damage was a miner cut and bruising followed by increased pain and swelling later that day.
220252160022C13849The crosshead for the Single Drum Lining Hoist became caught on top of a concrete pipe bracket that extended from the shaft liner 8.5" at 388' as the hook continued to be lowered down to a depth of 500'. The crew moved the work deck back to center the crosshead fell off the concrete pipe bracket and fell down to the headache ball causing 6' of damage to lower end of the hoist rope.
220252160031C12175Employee was using a 3lb hammer to drive a grounding rod when they struck their left index finger after missing the grounding rod and striking their finger with the hammer. They received 2 stitches to close the wound.
220252160038C11183Employee was operating a hammer drill and struck themselves in the mouth causing them to chip their right front tooth.
220252180012C10311Section floor was muddy and wet
220252190016C11033While lubricating haul truck wheel hardware, metal protruding from hardware lacerated left pinky finger
220252230002C10872Employee was climbing up ladder to get onto drill and felt a pop in EE's left shoulder.
220252240009C12295Employee was performing maintenance on a GMC 645 service truck. While in the process of walking around the front of the service truck EE inadvertently stepped on a rock causing EE to "roll" EE's ankle, fracturing the right ankle.
220252240018C13067Employee cut a piece of plastic pipe that was hanging vertically and was secured above by coupling. When they cut they moved to adjust their fall protection when the pipe came out of the coupling and fell onto their hand, amputating two of their fingers on their left hand. Doctors were unable to reattach.
220252250005C12025EMPLOYEE WAS HELPING LOAD A DOZER ROLLER FRAME ONTO ROLLBACK AND WAS STANDING AT WINCH SPOOL ON BED OF TRUCK WHEN CHAIN BROKE AND CAUSED THE WINCH CABLE TO RECOIL BACK STRIKING EMPLOYEE IN THE LEFT HAND
220252300021C11674Employee was cutting belt to take out slack to get thru door, belt shifted and knife slipped and accidentally struck employee in the leg area causing injury.          
220252320002C12195EE was standing on right side fender doing EE's pre-trip inspection when EE went to exit fender EE missed a step and slipped. Then EE fell to the ground on EE's right side elbow/arm. Went to ER, had strain to right arm.
220252320021C11464Employee was z drilling and went to bring the bolt up, when the spin got caught. The drill head and cylinder snapped off and hit their right hand.
220252330001C10652Operating coal loader and hit a dip in the road hurting EE's neck
220252330010C12486Maintenance Employee attempting to loosen bolt/nut on boom/carousel on pump truck when wrench slipped off and the back of the employee's left hand struck sharp edge of plate on top of carousel resulting in a laceration to the back of the left hand.
220252340032C13137Having trouble fixing an air tugger, EE was on the platform and coworker just looked at them and had eye contact. Coworker turned to keep working with third person and they heard a noise and EE was on the ground.  No one knows exactly what happened.  The assume that the safety catch for the drill steel came out.
220252340034C13658EE was assisting with final seal prep cleaning the bottom with a shovel when a piece of rock fell from the top and struck their hand against the shovel handle, causing a laceration. Injury was not the result of a training or compliance issue. 7000-1 was initially filled out 5/12/25, but the "Submit" button was inadvertently not clicked, thus this late submission.
220252380005C11223EE was spreading calcium in the intake at break #13 on #1 belt. EE had allergic reaction causing a skin rash on both legs 
220252380010C11494A 4'x4'x 1/4'' steel plate guarding fell (old piece being removed) pinching the employees finger between the plate and backhoe slope mucker handrail.
220252400002C13738Employee was tightening a centerline cable for a dredge boat. Weather was clear temperature around 70 degrees Fahrenheit. As the employee was gaining tension on the centerline cable, the sideline cable the centerline was attached to was released due to a clamp failure. This caused the centerline cable and associated puller to strike the affected employee in the left leg.
220252410014C10752Tool slipped and employee fell to a lower surface injuring the right elbow.
220252460015C11654EE was carrying V-Deck and stepped over a beam on the ground. As EE stepped over, EE twisted EE's ankle. Injury was not the result of a training or compliance issue.
220252470007C13608while operating a BELL 30T ARTICULATING haul truck, operator was exiting dump area with empty load and traveled at an angle to the muddy ruts on the dump. operator states that left front wheel went into rut, and jarred EE. later in the shift EE complained about soreness, refused medical attn at that time. finished EE's shift. The next day EE went to the E.R.
220252480023C11193Employee was removing crib from under the pan. Pan came off of scoop and struck their left hand, crushing their fingers
220252510002C13548Employee was loosening a concrete pipe coupler to clear a plugged concrete pipe. When the IE pulled the latch on the concrete line coupler the pressure build up caused the coupler to unexpectedly blow off the line causing the flex line that was coupled to the hard line to strike the employee on top of the right foot causing a laceration and a fracture.
220252590001C12275Employees were pulling a CMI door closed with a come-along after changing a screen. The hinge of the door broke, and the door fell, striking the IE on the collarbone. Injury was not the result of a training or compliance issue.
220252590013C12726The cutoff wheel fractured during grinding, and a fragment struck the employee's right arm, causing a laceration that required sutures to close. The disc had the proper RPM rating for the grinder, and the employee was wearing all necessary PPE at the time of the incident.
220252610032C12586Employee was engaged in the mucking phase of shaft construction.  A bucket of muck was sent out of the shaft when a rock fell striking them in the hardhat.  This resulted in the employee having a small laceration which needed 2 staples and a mild concussion.
220252690009C11323Employee stated they dropped piece of belt rail on their foot right they took to er and checked and X-ray negate for any broke bones
220253170046C11754Employee injured left shoulder on 7/30/2025. accident was reported and employee returned to work 8/4/2025. employee then reinjured EE's same shoulder pulling self up on drill.
220253170065C11363A rock fell out of the roof on a beltline and struck employee in the ankle. Injury was not the result of a training or compliance issue.
220253170067C12406Employee was assisting in loading a piece of rail onto a car. EE's right hand was caught between the rail and the bed of the car as another employee shoved the rail into position. Injury was not the result of a training or compliance issue.
220253170139C137789/19/25, EE was straightening metal pipe framework on a drill rig using a chain come-a-long. One of the anchor hooks came loose, striking EE's left hand and thumb. EE was wearing gloves and safety glasses. First aid was administered, and EE returned to work that day. On 10/02/25, EE reported worsening pain in EE's thumb, which was later diagnosed as fractured at Urgent Care.
220253170186C13047Employee was lifting short pieces of beam to load them in the back of a truck. On the last beam they twisted after they picked it up, causing them to strain their lower back. Employee went to doctor the next day and was told to rest their back every 40 minutes. Employee has been placed on modified duty.
220253170188C11524Employee was welding cracks in a tube on a 777 Rock Truck when some grease that was in the tube got to hot and shot out of the tube burning our employee
220253170222C11584The IE was using a prybar and it slipped out causing the IE to fall and land on EE's elbow. The IE continued to work until 10/1/2025 when EE received surgery.
220253170224C12335Employee just finished hanging longwall jumper cables in the track spur. Started to step away when the hooks straightened and jumper cables fell onto left shoulder. (coupler for one the cables struck on the top of EE's left shoulder)
220253170236C12516The employee's pant leg got caught up in a fallen down branch while walking a stream for environmental monitoring.  Upon trying to free EE's pant leg from the branch, EE lost EE's balance, fell and cut EE's left palm on a rock, requiring five sutures.
220253170306C10882using grinder and caught gloves with grinder cutting right pinky finger on first knuckle
220253170322C13448Approximately 11PM on October 16, 2025 worker was on a ladder about 2 feet off of the ground. EE was removing a 50-60lb chain fall. Had excess chain sitting on EE's upper back. Once the chain fall was removed the weight distribution made EE lose balance and EE fell off ladder and hit head on a piece of steel structure directly in front of EE.
220253170352C12355EMPLOYEE WAS WORKING ON INSTALLING A BELT SCRAPER ON THE 11c HEAD, WHEN THE OUTBY BELT UNEXPECTEDLY STARTED.  THE BELT TRANSPORTED THE EMPLOYEE APPROXIMATELY 30 FEET BEFORE IT WAS STOPPED BY PULL SWITCH.  RESULTED IN A FRACTURED ANKLE.
220253170381C11704on morning of 10/12/2025 at around 10:00am employee stepped out of truck, stepped on rock and said EE's knee popped. EE finished shift and went to the doctor the next day
220253170417C10411Lifting rail and dropped on their fingers
220253170452C10862Operator was operating articulator truck and hit a hole in the road hurting EE's back.
220253170465C13087employee was using grinder and grinder caught on gloves cutting right pinky finger on first knuckle, Finger was almost cut off. the cut did cut the tendons and was taken off work. Each employee will now be trained properly trained on using said machine, do not use any equipment without proper guard in place
220253170466C11774Employee was working at the tail of #14 prep plant belt and was using a come along to tighten belt clamps when a chain broke striking EE in the right knee resulting in a sprain.
220253170521C11874Employee was removing old belt structure from an area and stacking it on scoop.  A piece slipped out and accidentally struck employee on the hand that was placed against the scoop bucket.
220253170644C11013EMPLOYEE WAS CLIMBING OFF A D10R DOZER AND MISSED THE BOTTOM STEP ON THE PUSH ARM TWISTING RIGHT KNEE
220253170662C10902Employee accessing the cab of the skid loader, miss stepped and bumped shin on the bucket.
220253170670C12335IE was assisting another miner with removing the drill rig operator's platform so they could change the drill bit. The IE got a finger pinched between two pieces of chain, resulting in a laceration that required 4 stiches to close up
220253170688C12536EE was working at mine site, and the weather had been raining. EE was walking to their truck in the wet red clay when left foot slid forward causing them to fall backwards. During the fall, the EE's right knee buckled, and they felt a pop in right knee.
220253170709C12806During a section move, employee was conducting housekeeping and picking up hinge pins.  When employee was on their way to place the pin on the power center, they accidentally tripped on a hinge pin and got their hands caught between the hinge pins and power center causing injury.
220253210018C12355Employee was observing the removal of a joint of 3" hose. When the staple was removed from one end of the hose, the hose blew out under pressure. The stream of water forced the employee to the ground, where EE injured EE's arm and hip.
220253210019C11935Employee was observing the removal of a joint of 3" waterline. When the staple was removed from one end of the hose, the hose blew out under pressure. The hose struck the employee on the wrist.
220253210020C11774Employee was observing the removal of a joint of 3" waterline. When the staple was removed, the hose blew out under pressure. The hose struck the employee in the mouth and head.
220253210021C12085Employee was picking up K-doors with crew to put on the hinges.  A piece of metal skirting came loose from the door and slid and accidentally caused employee's thumb to get caught between two pieces of metal.
220253230001C12676Injured worker was installing a track on a bulldozer. As EE picked up the back of track, the chain that is used to pick up the track slipped off the track and struck the worker in the mouth. Worker  lost 2-3 teeth. Fracture involving left paramedian anterior maxilla.
220253230004C10983employee was using pry bar and it slipped causing EE cut EE to cut EE's finger on a piece of metal
220253230016C11073Dark out with dry/calm weather conditions. Uneven walking surface with loose ballast and exposed rail ties.
220253280041C12005Employee was standing in a crosscut while a group of miners were pulling belt together.  During the pulling process, a rope accidentally broke and an object struck employee in the hand causing injury.
220253280046C11333Employee was removing old belt structure when left index finger was caught between the top of the new frame and an old bottom roller.
220253300014C11273Injured was removing Shim Pack from Ventilation Fan, the Shim Pack unexpectedly shifted striking the injured on the left wrist.
220253350021C11694Clear Cutting, a lot of the trees has grape vines in the tops, while cutting one tree when cut the grape vines pulled the rotted top down and hit my employee in the head
220253370002C12235Employee was helping fix a shuttle car chain.  The boom was being lowered and employee saw a shovel.  EE reached in to retrieve the shovel and accidentally got EE's other hand pinched by the shuttle car boom causing injury.
220253370015C13057Employee struck by screen deck during deck replacement. Employee struck by deck between deck and chute of screen in the hop area. Initial treatment sought on 11/16/25 with a follow up to specialist for final diagnosis on 12/1/25. Final diagnosis of pelvic and tailbone fracture. Employee was not pinned.  
220253380005C12686Employee was carrying a beam with another employee to put on top of bolter. The employee in the back tripped on rough bottom and dropped the beam.  The beam accidentally slid, and inadvertently, the injured employee's finger got pinched between the rib and the beam.  
220253390004C12105EE was repairing a hose coupling on a CAT 992 D Rubber Tire End loader - Equipment # R14107 - to install the new coupling EE pulled on the hose to gain access to the coupling and injured EE's right arm/shoulder
220253390010C12907We are a water treatment company. This employee is not an employee of Tunnel Ridge. They were getting into position to take a picture for a service report. They stepped on some loose gravel/dirt. Their feet slipped out from under them. They landed on a large rock on their lower right back.
220253430001C11073IE was cutting a piece of wood with EE's knife when the blade slipped and cut self.  IE received 6 sutures.
220253430002C13849An employee was emptying a muck bucket that was filled with water to prepare it for a man trip. During this activity, the bucket started to rotate and dump the water towards the employee. The employee stepped in to stop the rotating of the bucket with EE's right hand and caught EE's middle finger between the bail stop and bail. The employees received 5 sutures, and small fractures.
220253450001C13838Moving passenger vehicle. The closing door struck the left side of EE's head, knocking head and most of body into the car. The EE received a minor cut on the R side of head, eyebrow area, but L leg, below the knee, was still outside the vehicle. The vehicle continued forward, still in contact with 12" barrier post, door closed, causing both bones in EE's lower leg to be fractured.
220253450005C13087EE backed up to coal pile at Quincy Dock to dump a load of coal. EE raised EE's bed about 2 stages and the tailgate did not release. At that time EE lowered the bed but the dump bed was leaning too much and the truck turned over - truck and trailer both damaged, EE sustained 2 broken ribs and a bruised leg.
220253450007C11023Injured was prepping to drop roller and the grinder came out of their grip from kickback when cutting.
220253450018C11754A loaded coal truck collided with an empty coal truck while traveling in opposite directions. This incident resulted in a broken leg for the operator in the empty coal truck. 
220253450019C11744A loaded coal truck collided with an empty coal truck while traveling in opposite directions. The operator of loaded coal truck experienced soreness and was written off work.
220253500023C10862IE was using a hammer to drive out a frozen pin and hit their thumb causing a fracture
220253500025C13247Employee set up a 5' step ladder to assist with hanging a bag. When they stepped up onto the first rung the left leg shifted causing them to lose balance and fall. They used their left arm to brace for the fall. Their hand struck the ground spraining their thumb. Injury was not the result of a training or compliance issue.
220253500026C12015Employee was cutting a plank for blocking rail when the bucksaw became stuck in a knot. Employee cut their hand after pulling the saw loose. Injury was not the result of a training or compliance issue.
220253500027C11123Employee tripped over loose material in a crosscut. Injury was not the result of a training or compliance issue.
220253520012C11073Employees right knee was caught between the bucket being raised and the bucket on the bottom of the shaft. 
220253530009C11273While walking on the beltline, a rock fell from the top and struck the back of the employees neck and then landed on EE's hand.
220253530013C10431Cut left pointer finger on a piece of metal
220253560008C10582EE was lifting a timber and felt a pain in EE's groin area
220253570004C11935Accident was not observed by any witness and injured employee does not remember circumstances of the accident. Injured employee has a broken nose, received stitches and staples and had bruises.
220253570031C13768Employee was cleaning dirt, oil, and grease from a retainer cap. After removing all the debris, they ran their hand over the cap's surface. As the employee placed their hand on the cap, a small metal burr protruded from a bolt hole. The bur poked the employee in the hand, and they jerked it back, causing a laceration to their palm requiring three sutures to close the wound.
220253630003C11554A contract employee was cutting a piece of mine belt with a utility knife and the knife slipped, resulting in a small laceration just above the right knee.
220253630012C10842Lifting casing to thread and felt burning sensation in groin.  Diagnosed with hernia
220260050009C11063Employee bent over to pick up a cable sling for PVC pipes and felt a pop in the center of EE's lower back.
220260080002C13017Employee was assisting installing J-screws into rib. When the bit on the drill became lodged and stuck, employee attempted to free it by pulling on the drill. Employee's hand slipped onto the bit, which spun and injured the employee's hand. Injury was not the result of a training or compliance issue.
220260130020C12546Employee was unloading props from a flat car. When EE cut the band, the props fell from the car. As the employee stepped out of the way, EE tripped and was struck in the hand by a falling prop. Injury was not the result of a training or compliance issue.
220260130027C11704Employee and 2 fellow workers were holding onto a winch they took off of a push pole when it slipped, they lost grip of the winch, and it came down onto their right foot.
220260150009C11484Stemming for a shot, ground was frozen, shoveling was tough, hit something solid and the impact jolted right wrist  - filled statement out on 1/8/26
220260150022C13618This injury was not identified as as a recordable until 01/09/26. The EE reported a back strain while lifting and moving a vulcanizing press from a belt line UG to a track on a flat car on a mine site. At a later time the EE received treatment at a medical facility and an over counter prescription resulting in a recordable incident due to the original injury.
220260270005C12486Employee stated EE had unhooked a chain from the MRS on a LoBoy. When EE attempted to step off the LoBoy, EE's foot hit the end of the ramp causing EE to twist EE's left knee. Employee had surgery on 1/21/26 and started PT on 1/22/26. No lost days.
220260480025C12726EE was in the process of fueling up an excavator at the North Fuel tank area on the refuse disposal area. When the EE stepped down off the track to the ground, their left knee gave out. The EE continued to work until 2/13/2026 when they went off for surgery on their knee.
