MSHA - Technical Support - Approval and Certification Center - Lists of Approved Products

LIST OF APPROVED PRODUCTS
2004-12-A&CC

Revised 11-04-04 Correction: Part 18 Evaluation No. should have been listed as 18-ISA040001-0.

The following products were approved or certified during September 2004, and have been added to the Mine Safety and Health Administration's list of permissible equipment.

The following products were approved as having met Part 7, Title 30 CFR.

1. Type 85-11-64, Battery Assembly. Approval No. 07-CA040003-0, issued to Crown Battery Manufacturing Company, 1034 Executive Drive, Gibsonia, Pennsylvania 15044, September 29, 2004.

2. Type dWaE24/2-2, 22 or 27/33kW, Alternating Current Motor. Approval No. 07-JA040005-0, issued to Eickhoff Corporation, 200 Park West Drive, Pittsburgh, Pennsylvania 15275, September 13, 2004.

3. Type 35TM/4-4, Alternating Current Motor. Approval No. 07-JA040006-0, issued to Eickhoff Corporation, 200 Park West Drive, Pittsburgh, Pennsylvania 15275, September 13, 2004.

4. Round Signal Cable. Approval No. 07-KA040009-0, issued to AmerCable Corporation, 680 Dutch Ridge Road, Beaver, Pennsylvania 15009, September 17, 2004.

5. A306008 Mining Cable. Approval No. 07-KA040010-0, issued to The Rochester Corporation, 751 Old Brandy Road, Culpepper, Virginia 22701, September 22, 2004.

The following products were approved or certified as having met Part 18, Title 30 CFR.

1. 5000002257 FLP Enclosure. Certification No. 18-XPA040006-0, issued to Joy Mining Machinery, 120 Liberty Street, Franklin, Pennsylvania 16323, September 13, 2004.

2. 17620 Control Box Assembly. Certification No. 18-XPA040007-0, issued to Gormann-Rupp Company, 305 Bowman Street, P.O. Box 1217, Mansfield, Ohio 44901, September 24, 2004.

3. 318475 Drive Box. Certification No. 18-XPA040008-0, issued to DBT America, Inc., 4041 Wurno Road, Pulaski, Virginia 24301, September 30, 2004.

The following product was evaluated as having met Part 18 Instrinsic Safety Evaluation, Title 30 CFR.

1. I.S. Control Valve Enable System. Evaluation No. 18-ISA040001-0, issued to J.H. Fletcher and Company, P.O. Box 2187, Huntington, West Virginia, 25722, September 16, 2004.

The following product was approved as having met Part 19, Title 30 CFR.

1. Wheat LI-16 Electric Cap Lamp System. Approval No. 19-A040001-0, issued to Koehler-Bright Star, Inc., 380 Stewart Road, Wilkes-Barre, Pennsylvania 1870, September 9, 2004.

The following product was approved as having met Part 22, Title 30CFR.

1. Model M40 Multi-Gas Monitor and SP40 Sampling Pump. Approval No. 22-A040002-0, issued to Industrial Scientific Corporation, 1001 Oakdale Road, Oakdale, Pennsylvania 15071, September 1, 2004.

The following products were accepted as having met the Interim Fire Criteria Acceptance of Products Taken Into Underground Mines.

1. The following acceptances were issued to Ryco Hydraulics Sdn. Bhd., Plot 27, Kuala Ketil Industrial Estate, 09300 Kuala Ketil, Kedah Darul Aman, Malaysia, September 22, 2004.

Sincerely,

Steven J. Luzik

Chief, Approval and Certification Center