Skip to content
PDF Version
LIST OF APPROVED PRODUCTS
2007-05-A&CC


The following products were approved or certified during February 2007, and have been added to the Mine Safety and Health Administration's list of permissible equipment.

The following products were approved as having met Part 7, Title 30 CFR.

1. Type 36-45, 55/60, 65/70, 75/85 A.H., 7 Plate, 72 Volt, 135 to 255 Amp Hour Battery Assembly. Approval No. 07-CA070003-0, issued to Crown Battery Manufacturing Company, Inc., 902 Old Freeport Road, Pittsburgh, Pennsylvania 15238, February 23, 2007.

2. 64 Cell, 128 Volt, 45, 55/60, 65/70, 75/85, 90 Low, 90/100, 110/125/140, 540 to 1680 AH Battery Assembly. Approval No 07-CA070004-0, issued to Crown Battery Manufacturing Company, Inc., 902 Old Freeport Road, Pittsburgh, Pennsylvania 15238, February 23, 2007.

3. VFD Cable. Approval No. 07-KA070003-0, issued to Belden, 2200 U.S. Highway 27 South, Richmond, Indiana 47374, February 9, 2007.

4. Type 980000 Shielded Trunk Cable. Approval No. 07-KA070004-0, issued to Coleman Cable Company, 1530 Shields Drive, Waukegan, Illinois 60085, February 28, 2007.

5. Frame XP31 (10 thru 48) Series, 20 to 85 Horsepower, 75 thru 1,000 Volt, 3 Phase, 10 to 80 Hertz, AC Motors. Approval No. 07-JA070002-0, issued to Flanders Electric Motor Service, Inc., 8101 Baumgart Road, Evansville, Indiana 47725, February 8, 2007.

The following products were approved or certified as having met Part 18, Title 30 CFR.

1. Type EL2000, 4160 Volt, 3 Phase, 60 Hertz, Alternating Current Shearer. Evaluation No. SE22857-0, issued to DBT GB Limited, Pioneer House, 2 Renshaw Place, Holytown, Motherwell, Scotland ML1 4UF, February 23, 2007.

2. Longwall Mining System. Approval No. 18-A070002-0, issued to Bridger Coal Company, P.O. Box 68, Point of Rocks, Wyoming 82942, February 21, 2007.

The following product was accepted as having met the flame requirements of Part 18, Title 30 CFR, and the "Flame Resistant Solid Products Taken Into Mines" criteria.

1. "MULTI-PLY No. 82-04" Conveyor Belt. Approval No. 18-CBA070001-0, issued to Taeryuk Rubber Belt Co., 306-802, 40-56 Daehwa_Dong, Daeduck-Ku, Taejon Korea, February 15, 2007.

The following products were approved as having met Part 33, Title 30 CFR.

1. The following dust collection system approvals were issued to J.H. Fletcher & Company, P.O. Box 2187, Huntington, West Virginia 25722, February 15, 2007:
    Model DB Roof Drill 33-MA070001
    Model PDB Roof Drill 33-MA070002
    Model DR Roof Drill 33-MA070003
    Model DR-D Roof Drill 33-MA070004
    Model DDR Roof Drill 33-MA070005
    Model RRI Roof Drill 33-MA070006
    Model RRII Roof Drill 33-MA070007
    Model DM Roof Drill 33-MA070008
    Model DDM Roof Drill 33-MA070009
    Model DDO Roof Drill 33-MA070010
    Model LTDO Roof Drill 33-MA070011
    Model DDJ Roof Drill 33-MA070012
2. The following approvals were issued to Joy Mining Machinery, 120 Liberty Street, Franklin, Pennsylvania 16323, February 8, 2007:
    Model ED Miner/Roof Drill 33-MA070013
    Model DMU Roof Drill 33-MA070014
The following product was approved as having met Part 35, Title 30 CFR.

1. Quintolubric 818-02 High Water Base Hydraulic Fluid Concentrate. Approval No. 35-A060001-0, issued to Quaker Chemical Corp., One Quaker Park, 901 Hector Street, Conshohocken, Pennsylvania 19428, February 9, 2007.

The following products were approved as having met Part 36, Title 30 CFR.

1. Model DFP30-DT Articulated Haulage Unit (Dump Truck). Approval No. 36-CA070001-0, issued to Sandvick Mining and Construction Canada, Inc., 4445 Fairview Street, Burlington, Ontario, Canada L7L2A4, February 8, 2007.

2. Model DFP07-CS Load Haul Dump (LHD). Approval No. 36-CA070002-0, issued to Sandvick Mining and Construction Canada, Inc., 4445 Fairview Street, Burlington, Ontario, Canada L7L2A4, February 12, 2007.

The following products were accepted as having met the "Flame Resistant Solid Products Taken Into Mines" criteria.

1. "Texstrip" Hydraulic Hose Protection Sleeve Belt. Acceptance No. IC-207/4, issued to Mazzer Industries, Inc., 700 Mile Crossing Blvd., Suite #4, Rochester, New York 14624, February 27, 2007.

2. PEFR 20/180 Webb Tube. Acceptance No. IC-213/3, issued to Spiral Guard Australia Pty Ltd., Lot 10 Bullsbrook Road, Bullsbrook WA 6084, Australia, February 2, 2007.

3. FRPE 20 through 180 Webb Tube. Acceptance No. IC-213/4, issued to Spiral Guard Australia Pty Ltd., Lot 10 Bullsbrook Road, Bullsbrook WA 6084, Australia, February 2, 2007.

The following products should have been listed in the "List of Approved Products, 2007-03-A&CC".

1. Caterpillar Model 3126B Hydraulic Electronic Unit Injector (HEUI) Diesel Engine. Approval No. 07-EPA060001-0, issued to Sandvik Mining and Construction Canada, Inc., 4445 Fairview Street, Burlington, Ontario, Canada L7L2A4, December 7, 2006.

2. Model EGPP-01 Diesel Power Package. Approval No. 07-FA060002-0, issued to Sandvik Mining and Construction Canada, Inc., 4445 Fairview Street, Burlington, Ontario, Canada L7L2A4, December 7, 2006. Sincerely,

John P. Faini

Chief, Approval and Certification Center