|
LIST OF APPROVED PRODUCTS
2001-08-A&CC The following products were approved or certified during May 2001, and have been added to the Mine Safety and Health Administration's list of permissible equipment. The following products were approved as having met Part 7, Title 30 CFR. 1. Type E155-17P. Approval No. 7C-01002-0, issued to EnerSys Incorporated, P.O. Box 14145, Reading, Pennsylvania 19612, May 25, 2001. 2. Type E155-25. Approval No. 7C-01003-0, issued to EnerSys Incorporated, P.O. Box 14145, Reading, Pennsylvania 19612, May 25, 2001. 3. Diesel Engine, Model C240MA (QD60), Group I and II. Approval No. 7E-B085-0, issued to American Isuzu Motors, Incorporated, 41280 Bridge Street, Novi, Michigan 48375, May 25, 2001. 4. Frame E5010 Motor Assembly. Approval No. 7J-01002-0, issued to Rockwell Automation/Reliance Electric Company, 6040 Ponders Court, Greenville, South Carolina 29615, May 4, 2001. 5. Frame E225MWC Motor. Approval No. 7J-01009-0, issued to Hertz Technologies, Ltd., c/o Engart American, P.O. Box 192, Van, West Virginia 25206, May 25, 2001. 6. Type W cable. Approval No. 7K-264118-0, issued to Rockbestos-Surprenant, 20 Bradley Park Road, East Granby, Connecticut 06026, May 23, 2001. The following products were certified or approved as having met Part 18, Title 30 CFR. 1. Model CHXPE-1 Control Enclosure Assembly. Certification No. X/P-4158-0, issued to Oldenburg Stamler, P.O. Box 307, Millersburg, Kentucky 40348, May 1, 2001. 2. 5000007084 Controller Enclosure Assembly. Certification No. X/P-4161-0, issued to Joy Mining Machinery, 120 Liberty Street, Franklin, Pennsylvania 16323, May 30, 2001. 3. 5000007368 Controller. Certification No. X/P-4162-0, issued to Joy Mining Machinery, 120 Liberty Street, Franklin, Pennsylvania 16323, May 29, 2001. 4. Model microPac Personal Gas Alarm. Approval No. 2G-4118-0, issued to Draeger Safety, Inc., 101 Technology Drive, Pittsburgh, Pennsylvania 15275, May 10, 2001. 5. Model 17071 Distribution System. Approval No. 2G-4123A-0, issued to West Ridge Resources, Inc., c/o Intermountain Electronics, P.O. Box 914, 1503 South Highway 6, Price, Utah 84501, May 31, 2001. The following product was approved as having met Part 20, Title 30 CFR. 1. Models 2AA, 4AA, and 3C Propolymer Flashlights. Approval No. 10C-648-0, issued to Streamlight, Inc., 1030 West Germantown Pike, Norristown, Pennsylvania 19403, May 4, 2001. The following products were accepted as having met the Interim Fire Criteria Acceptance of Products Taken Into Underground Mines. 1. Guardabelt Impact Bar. Acceptance No. IC-95/8, issued to Martin Engineering Co., One Martin Place, Neponset, Illinois 61345, May 9, 2001. 2. Diesse Mine Hydraulic Hose Cover (Firest 1-2C). Acceptance No. IC-118/02, issued to DIESSE Rubber Hoses S.p.A., Via Provinciale 8, 24040 Filaco (BG) Italy, May 11, 2001. 3. Diesse Mine Hydraulic Hose Cover (Firest C-1D). Acceptance No. IC-118/03, issued to DIESSE Rubber Hoses S.p.A., Via Provinciale 8, 24040 Filaco (BG) Italy, May 11, 2001. 3. Nylon webbing hose protection sleeve. Acceptance No. IC-212/0, issued to TapeCraft Corporation, P.O. Box 2027, Anniston, Alabama 36202, May 9, 2001. The following product was accepted as having met the requirements of the voluntary "Standard Application Procedure for Sealants Applied to Underground Ventilation Controls." 1. Matrix PAAC Blocks dry-stacked with FOSROC "Airtite Trowel Grade" sealant. MSHA-ST16/02, issued to Matrix PAAC, L.P., 6600 Highlands Parkway, Smyrna, Georgia 30082, May 24, 2001. Sincerely, Steven J. Luzik Steven J. Luzik |
