Slide (80 of 85)
|
|
CABLES CONNECTING ELECTRICAL COMPONENTS MUST BE:
12. Clamped in place to prevent undue movement.
13. Protected from mechanical damage by position, flame resistant hose conduit, metal tubing, or troughs.
NOTE: Flexible or threaded rigid metal conduit is not acceptable.
14. Not subject to abrasion from sharp corners or edges.
15. Isolated from hydraulic lines and components.
16. Isolated from fuel lines.
17. Flame resistant if not enclosed in hose conduit. This is indicated by "MSHA" marked on the cable.
|
|